- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- UBE UBESTA® 3030U Nylon 12 (After Saturate Sodium Chloride for 1000 hours)
UBE UBESTA® 3030U Nylon 12 (After Saturate Sodium Chloride for 1000 hours)
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | UBE |
| Trade Name | UBESTA® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | UBE UBESTA® 3030U Nylon 12 (After Saturate Sodium Chloride for 1000 hours).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, cleaning agents, water, seawater and other chemicals. Compared with other types of plastics, UBESTA is particularly resistant to oils, and it displays strong resistance to organic acids and metal chlorides which adversely affect Nylon 12 and Nylon 66Information provided by UBE.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 46.8 MPa | 6790 psi | 93% Ret. |
| Tensile Strength, Yield | 35.7 MPa | 5180 psi | 85% Ret. |
| Elongation at Break | 94 % | 94 % | 118% Ret. |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 230 °C | 446 °F | Flange Temperature for T-Die Cast Film Extrusion |
| Zone 1 | 190 °C | 374 °F | For T-Die Cast Film Extrusion |
| 230 °C | 446 °F | For 8x1 mm Tube Extrusion | |
| Zone 2 | 210 °C | 410 °F | For T-Die Cast Film Extrusion |
| 225 °C | 437 °F | For 8x1 mm Tube Extrusion | |
| Zone 3 | 220 °C | 428 °F | For 8x1 mm Tube Extrusion |
| 230 °C | 446 °F | For T-Die Cast Film Extrusion | |
| Zone 4 | 215 °C | 419 °F | For 8x1 mm Tube Extrusion |
| Die Temperature | 230 °C | 446 °F | For T-Die Cast Film Extrusion |
| Die Opening | 0.0400 cm | 0.0157 in | For T-Die Cast Film Extrusion |
| Roll Temperature | 50.0 °C | 122 °F | Chill Roll Temperature for T-Die Cast Film Extrusion |
| Drying Temperature | 80.0 °C | 176 °F | Option 1 |
| 100 °C | 212 °F | Option 2 | |
| 110 °C | 230 °F | Option 3 | |
| Dry Time | 2 - 4 hour | 2 - 4 hour | Option 3 |
| 4 - 6 hour | 4 - 6 hour | Option 2 | |
| 6 - 8 hour | 6 - 8 hour | Option 1 | |
| Screw Speed | 15 - 76 rpm | 15 - 76 rpm | For 8x1 mm Tube Extrusion |
| Descriptive Properties | Value | Comments |
|---|---|---|
| C/R | 3-3.5:1 | For 8x1 mm Tube Extrusion |
| Calibrating Vacuum | 100 mbar | For 8x1 mm Tube Extrusion |
| Calibration | 9.95 mm | For 8x1 mm Tube Extrusion |
| Compression Ratio | min 3:1 | For 8x1 mm Tube Extrusion |
| Die Diameter | 16 mm | For 8x1 mm Tube Extrusion |
| Die Width | 300 mm | For T-Die Cast Film Extrusion |
| Extruder | Barmag, Screw Diameter = 30 mm | For T-Die Cast Film Extrusion |
| Extruder Characteristics | 65 mm screw diameter | For 8x1 mm Tube Extrusion |
| Film Thickness | 60 microns | For T-Die Cast Film Extrusion |
| Haul Off Speed | 5 m/min | For T-Die Cast Film Extrusion |
| Haul Speed | 10-55 m/min | For 8x1 mm Tube Extrusion |
| L/D Ratio | 25:1 | For 8x1 mm Tube Extrusion |
| Length of Compression Zone | 30% of screw length | For 8x1 mm Tube Extrusion |
| Length of Feeding Zone | 30-40% of screw length | For 8x1 mm Tube Extrusion |
| Length of Metering Zone | 30-45% of screw length | For 8x1 mm Tube Extrusion |
| Mandrel Diameter | 12 mm | For 8x1 mm Tube Extrusion |
| Tensile Work To Break | 893 kJ/m2 | 110% Ret. |
| Water Temperature | 10-18°C | For 8x1 mm Tube Extrusion |
Users viewing this material also viewed the following:
- Oxford Polymers PEEK-20CF-Black PEEK, 20% Carbon Fiber Reinforced
- Protective Coating PC-11® White Epoxy Paste
- Park Electrochemical Nelcote® E-752 Epoxy Prepreg, 6K 5HS T300 Reinforced
- Advanced Elastomer Systems VistaFlex® 714-N Thermoplastic Rubber (discontinued **)
- DSM Akulon® S224-KMV7 Nylon 66-35% Mineral Reinforced (European and Asian Grade) (Dry) (discontinued **)
- Techmer ES HiFill® PA6 GF30 L X MT 30% Glass Filled
- Master Bond Supreme 11AN Two Component, Heat Resistant Epoxy Adhesive
- DSM Stanyl® TE250F9 Nylon 46-45% Glass Reinforced (European and Asian Grade) (Cond)
- Alpase M-1™ Aluminum Mold Plate
- Industeel URANUS® 45N 22Cr 3Mo Duplex Stainless Steel with PREN = 33 or 34
Copyright © lookpolymers.com All Rights Reserved