Styrolution LuranÂ® S 797 SE ASA

Category	Polymer , Thermoplastic , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
Manufacturer	Styrolution
Trade Name	Luran®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution LuranÂ® S 797 SE ASA.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Luran S 797 SE is an extrusion ASA grade with especially high notched impact strength, used for sheet and profile extrusions. The data representable is based on extruded sheet.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Water Absorption	1.65 %	1.65 %	ISO 62
Moisture Absorption at Equilibrium	0.35 %	0.35 %	23Â°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0055 cm/cm	0.0055 in/in	ASTM Data; MD
Melt Flow	5.0 g/10 min @Load 10.0 kg, Temperature 220 Â°C	5.0 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ASTM Test
	5.5 g/10 min @Load 10.0 kg, Temperature 220 Â°C	5.5 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	90	90	ASTM Test
Tensile Strength, Yield	40.0 MPa	5800 psi	2 in/min; ASTM Test
	13.0 MPa @Temperature 80.0 Â°C	1890 psi @Temperature 176 Â°F	ISO Data
	64.0 MPa @Temperature -40.0 Â°C	9280 psi @Temperature -40.0 Â°F	ISO Data
Elongation at Break	27 %	27 %	2 in/min; ASTM Test
Elongation at Yield	2.9 %	2.9 %	2 in/min; ASTM Test
	2.3 % @Temperature 80.0 Â°C	2.3 % @Temperature 176 Â°F	ISO Data
	4.7 % @Temperature -40.0 Â°C	4.7 % @Temperature -40.0 Â°F	ISO Data
Tensile Modulus	1.83 GPa	265 ksi	ASTM Test
Flexural Strength	57.0 MPa	8270 psi	ASTM Test
Flexural Modulus	1.56 GPa	226 ksi	ASTM Test
Izod Impact, Notched	0.570 J/cm @Temperature -40.0 Â°C	1.07 ft-lb/in @Temperature -40.0 Â°F	ASTM Test
	2.80 J/cm @Thickness 3.17 mm	5.25 ft-lb/in @Thickness 0.125 in	ASTM Test

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	95.0 Âµm/m-Â°C	52.8 Âµin/in-Â°F	ISO 11359
	110 Âµm/m-Â°C	61.1 Âµin/in-Â°F	ASTM Test
Deflection Temperature at 1.8 MPa (264 psi)	82.0 Â°C	180 Â°F	annealed; ASTM Test
Vicat Softening Point	90.0 Â°C	194 Â°F	Rate "A" Loading 2 (50 degC/h 50N); ASTM Test
Flammability, UL94	HB @Thickness 1.58 mm	HB @Thickness 0.0622 in
	HB @Thickness 0.840 mm	HB @Thickness 0.0331 in
Oxygen Index	19 %	19 %	ISO 4589-1/-2

Optical Properties	Metric	English	Comments
Gloss	91 %	91 %	60Â° Specular; ASTM Test

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+12 ohm-cm	>= 1.00e+12 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	IEC 60093
Dielectric Constant	3.3 @Frequency 1.00e+6 Hz	3.3 @Frequency 1.00e+6 Hz	IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
Dissipation Factor	0.0090 @Frequency 100 Hz	0.0090 @Frequency 100 Hz	IEC 60250
	0.026 @Frequency 1.00e+6 Hz	0.026 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 Â°C	482 Â°F	Injection molding
Mold Temperature	60.0 Â°C	140 Â°F	Injection molding
Injection Velocity	200 mm/sec	7.87 in/sec	Injection molding
Drying Temperature	79.0 Â°C	174 Â°F	Injection Molding
Dry Time	2 - 4 hour	2 - 4 hour	Injection Molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	North America and Europe
Form	Pellets
Impact Modified	Yes
Injection Molding Regrind	<30%
NSF Std. 51	No
NSF Std. 61	No
Primary Processing Technique	Extrusion
Processing	Blow Molding
	Other Extrusion
	Profile Extrusion
	Sheet Extrusion
	Thermoforming
Special characteristic	Heat stabilized or stable to heat
	Light stabilized or stable to light
	U.V. stabilized or stable to weather
UL.UL-C	Yes
USP Class VI	No

Users viewing this material also viewed the following: