Solvay Specialty Polymers AvaSpire® AV-650 GF30 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone , Polyaryletherketone (PAEK), Glass Fiber Filled
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-650 GF30 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AvaSpire AV-650 GF30 is a 30% glass fiber-reinforced polyaryletherketone (PAEK) that has been specifically formulated to provide a high degree of chemical resistance and higher mechanical strength and stiffness than unfilled AV-650 resin. This material can be repeatedly exposed to harsh chemicals and prolonged steam sterilization cycles without any significant loss of properties. Potential applications for this resin include orthopedic and dental instruments, surgical power tool battery housings and other devices and components requiring a combination of high temperature performance and high environmental resistance. AvaSpire AV-650 GF30 can be easily processed by typical injection molding and extrusion methods using standard equipment. - Beige: AvaSpire AV-650 GF30 BG 20Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.55 g/cc	1.55 g/cc	ASTM D792
Filler Content	30 %	30 %	Glass Fiber Reinforcement
Water Absorption	0.40 %	0.40 %	30 days; ASTM D570
	0.20 % @Time 86400 sec	0.20 % @Time 24.0 hour	ASTM D570
Viscosity	410000 cP @Shear Rate 1000 1/s, Temperature 400 °C	410000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt; ASTM D3835
Linear Mold Shrinkage, Flow	0.0010 - 0.0030 cm/cm @Thickness 3.18 mm	0.0010 - 0.0030 in/in @Thickness 0.125 in	5" x 0.5" x 0.125" bars; ASTM D955
Linear Mold Shrinkage, Transverse	0.0080 - 0.010 cm/cm @Thickness 3.18 mm	0.0080 - 0.010 in/in @Thickness 0.125 in	5" x 0.5" x 0.125" bars; ASTM D955
Melt Flow	15 g/10 min @Load 2.16 kg, Temperature 400 °C	15 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	100	100	M-Scale; ASTM D785
Tensile Strength	142 MPa	20600 psi	ASTM D638
Tensile Strength, Yield	165 MPa	23900 psi	ISO 527-2/1A/5
Elongation at Break	2.6 %	2.6 %	5.0 mm/min; ASTM D638
	2.6 %	2.6 %	ISO 527-2/1A/5
Tensile Modulus	10.1 GPa	1460 ksi	5.0 mm/min; ASTM D638
	10.5 GPa	1520 ksi	ISO 527-2/1A/1
Flexural Strength	221 MPa	32100 psi	ASTM D790
	240 MPa	34800 psi	ISO 178
Flexural Modulus	9.00 GPa	1310 ksi	ASTM D790
	9.80 GPa	1420 ksi	ISO 178
Compressive Strength	163 MPa	23600 psi	ASTM D695
Shear Strength	80.8 MPa	11700 psi	ASTM D732
Izod Impact, Notched	0.960 J/cm	1.80 ft-lb/in	ASTM D256
	9.60 J/cm	18.0 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	13.0 kJ/m²	6.19 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	69.0 kJ/m²	32.8 ft-lb/in²	ISO 180

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	19.0 µm/m-°C @Temperature -50.0 - 50.0 °C	10.6 µin/in-°F @Temperature -58.0 - 122 °F	TMA; ASTM E831
Specific Heat Capacity	1.29 J/g-°C @Temperature 50.0 °C	0.308 BTU/lb-°F @Temperature 122 °F	DSC
	1.67 J/g-°C @Temperature 200 °C	0.399 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.290 W/m-K	2.01 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	340 °C	644 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	209 °C @Thickness 3.20 mm	408 °F @Thickness 0.126 in	Annealed; 2 hours at 200°C; ASTM D648
Glass Transition Temp, Tg	158 °C	316 °F	ASTM D3418
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in	UL 94
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	UL 94

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.6 @Frequency 1.00e+6 Hz	3.6 @Frequency 1.00e+6 Hz	ASTM D150
	3.65 @Frequency 60.0 Hz	3.65 @Frequency 60.0 Hz	ASTM D150
	3.66 @Frequency 1000 Hz	3.66 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	14.0 kV/mm @Thickness 3.00 mm	356 kV/in @Thickness 0.118 in	ASTM D149
Dissipation Factor	0.0020 @Frequency 60.0 Hz	0.0020 @Frequency 60.0 Hz	ASTM D150
	0.0050 @Frequency 1.00e+6 Hz	0.0050 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	365 °C	689 °F
Middle Barrel Temperature	370 °C	698 °F
Front Barrel Temperature	375 °C	707 °F
Nozzle Temperature	380 °C	716 °F
Melt Temperature	365 - 390 °C	689 - 734 °F
Mold Temperature	150 - 180 °C	302 - 356 °F
Drying Temperature	150 °C	302 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Appearance	Beige
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	High Heat Resistance
	High Stiffness
	High Strength
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Injection Molding
	Machining
	Profile Extrusion
Screw Compression Ratio	2.0:1.0 to 3.0:1.0
Uses	Medical/Healthcare Applications
	Oil/Gas Applications
	Power/Other Tools

Users viewing this material also viewed the following: