Sax Polymers SAXATEC 4115 Acrylonitrile Styrene Acrylate

Category	Polymer , Thermoplastic , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
Manufacturer	Sax Polymers
Trade Name	SAXATEC
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Sax Polymers SAXATEC 4115 Acrylonitrile Styrene Acrylate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

SAXATEC 4115 is a medium viscosity, weatherable ASA injection molding grade, characterized by high impact strength, high stiffness and good resistance to heat distortion.Information provided by SAX Polymers

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/in³
Linear Mold Shrinkage	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in
Melt Flow	16 g/10 min @Load 10.0 kg, Temperature 220 °C	16 g/10 min @Load 22.0 lb, Temperature 428 °F	from MVR; ISO 1033

Mechanical Properties	Metric	English	Comments
Tensile Strength	62.0 MPa	8990 psi	ISO 527-1
Elongation at Break	10 %	10 %	ISO 527-1
Tensile Modulus	2.80 GPa	406 ksi	ISO 527-1
Izod Impact, Notched (ISO)	5.00 kJ/m² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	ISO 180/1A
	7.00 kJ/m² @Temperature 23.0 °C	3.33 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Izod Impact, Unnotched (ISO)	40.0 kJ/m² @Temperature -30.0 °C	19.0 ft-lb/in² @Temperature -22.0 °F	ISO 180
	80.0 kJ/m² @Temperature 23.0 °C	38.1 ft-lb/in² @Temperature 73.4 °F	ISO 180
Charpy Impact Unnotched	6.00 J/cm² @Temperature -30.0 °C	28.6 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
	10.0 J/cm² @Temperature 23.0 °C	47.6 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	0.700 J/cm² @Temperature 23.0 °C	3.33 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Hot Ball Pressure Test	95.0 °C @Thickness 2.00 mm	203 °F @Thickness 0.0787 in	IE/CEN 60335-1
Deflection Temperature at 1.8 MPa (264 psi)	89.0 °C	192 °F	80104 s=60mm; ISO 75-1 a
Vicat Softening Point	104 °C	219 °F	50B; ISO 306
Glow Wire Test	750 °C	1380 °F	IEC 60695-2-12

Processing Properties	Metric	English
Melt Temperature	220 - 260 °C	428 - 500 °F
Mold Temperature	60.0 - 90.0 °C	140 - 194 °F
Drying Temperature	80.0 °C @Time 7200 - 21600 sec	176 °F @Time 2.00 - 6.00 hour
Moisture Content	<= 0.20 %	<= 0.20 %

Users viewing this material also viewed the following: