SABIC Innovative Plastics NORYL NH7010 PPE+PS (Asia Pacific)

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polystyrene (PS)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Noryl
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL NH7010 PPE+PS (Asia Pacific).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

High heat, Non halogenated flame retardant Noryl product

Physical Properties	Metric	English	Comments
Specific Gravity	1.09 g/cc	1.09 g/cc	ASTM D792
Density	1.09 g/cc	0.0394 lb/inÂ³	ISO 1183
Moisture Absorption	0.0500 %	0.0500 %	23Â°C / 50% RH; ISO 62
Water Absorption at Saturation	0.25 %	0.25 %	ISO 62
Linear Mold Shrinkage, Flow	0.0050 - 0.0080 cm/cm @Thickness 3.20 mm	0.0050 - 0.0080 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	10.1 g/10 min @Load 5.00 kg, Temperature 300 Â°C	10.1 g/10 min @Load 11.0 lb, Temperature 572 Â°F	ASTM D1238
Melt Index of Compound	10 g/10 min @Load 5.00 kg, Temperature 300 Â°C	10 g/10 min @Load 11.0 lb, Temperature 572 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	49.0 MPa	7110 psi	Type I, 50 mm/min; ASTM D638
	63.0 MPa	9140 psi	50 mm/min; ISO 527
Tensile Strength, Yield	68.0 MPa	9860 psi	Type I, 50 mm/min; ASTM D638
	69.0 MPa	10000 psi	50 mm/min; ISO 527
Elongation at Break	8.4 %	8.4 %	50 mm/min; ISO 527
	41 %	41 %	Type I, 50 mm/min; ASTM D638
Elongation at Yield	4.9 %	4.9 %	50 mm/min; ISO 527
	5.2 %	5.2 %	Type I, 50 mm/min; ASTM D638
Tensile Modulus	2.25 GPa	326 ksi	5 mm/min; ASTM D638
	2.50 GPa	363 ksi	1 mm/min; ISO 527
Flexural Yield Strength	102 MPa	14800 psi	1.3 mm/min, 50 mm span; ASTM D790
	109 MPa	15800 psi	2 mm/min; ISO 178
Flexural Modulus	2.47 GPa	358 ksi	1.3 mm/min, 50 mm span; ASTM D790
	2.52 GPa	365 ksi	2 mm/min; ISO 178
Izod Impact, Notched	2.23 J/cm	4.18 ft-lb/in	ASTM D256
	0.890 J/cm @Temperature -30.0 Â°C	1.67 ft-lb/in @Temperature -22.0 Â°F	ASTM D256
Izod Impact, Notched (ISO)	20.0 kJ/mÂ²	9.52 ft-lb/inÂ²	80104; ISO 180/1A
	8.00 kJ/mÂ² @Temperature -30.0 Â°C	3.81 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1A
Charpy Impact, Notched	2.10 J/cmÂ²	9.99 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	38.0 J @Temperature 23.0 Â°C	28.0 ft-lb @Temperature 73.4 Â°F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	81.6 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	45.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	81.6 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	45.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	81.5 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	45.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	81.5 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	45.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi)	139 Â°C	282 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	139 Â°C @Thickness 3.20 mm	282 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	160 Â°C	320 Â°F	Rate B/50; ASTM D1525
	161 Â°C	322 Â°F	Rate B/50; ISO 306
	162 Â°C	324 Â°F	Rate B/120; ISO 306
UL RTI, Electrical	105 Â°C	221 Â°F	UL 746B
UL RTI, Mechanical with Impact	105 Â°C	221 Â°F	UL 746B
UL RTI, Mechanical without Impact	105 Â°C	221 Â°F	UL 746B
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in	UL 94 by SABIC-IP
	5VA @Thickness 2.00 mm	5VA @Thickness 0.0787 in	UL 94 by SABIC-IP

Electrical Properties	Metric	English	Comments
Arc Resistance	60 - 120 sec	60 - 120 sec	Tungsten; ASTM D495
Comparative Tracking Index	175 - 250 V	175 - 250 V	UL 746A
Hot Wire Ignition, HWI	>= 120 sec	>= 120 sec	UL 746A
High Voltage Arc-Tracking Rate, HVTR	>= 150 mm/min	>= 5.91 in/min	UL 746A

Users viewing this material also viewed the following: