Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Plastcom SLOVAMID 66/6 HI/1 PA66/6, improved strength FeaturesMix of polyamide 66/6 modified with thermoplastic reactive caoutchouc, determined for mouldings with high toughness also at minus temperatures. Eligible application for ski-shoes, helmets fo.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792-60T |
Rotuba 856, Slow Burning Ethyl Cellulose Data provided by the manufacturer. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Cycolac® INP630 ABS+SAN INP630 is a specialty polymer that increases the service temperature of products. Can be used with a impact modifier to provide impact strength as well as high heat resistance. Provides excellent hi.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Geloy XTWM206 ASA Next generation ASA optimized for outstanding weatherability, colorability and higher heat applications requiring UV exposure resistance.This data was supplied by SABIC-IP for the Americas region. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Geloy XTWM206 ASA (Asia Pacific) Next generation ASA optimized for outstanding weatherability, colorability and higher heat applications requiring UV exposure resistance.This data was supplied by SABIC-IP for the Asia Pacific regio.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Polymer Resources PPX-SF2 Modified PPO, Structural Foam Grade, Standard Flow
(Unverified Data**) Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel.. |
|||
Density | 1.09 - 1.55 g/cc | 0.0394 - 0.0560 lb/in³ | Average value: 1.28 g/cc Grade Count:34 |
Overview of materials for Nylon 612, Carbon Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Carbon Fiber Filler". Each property range of values reported is minimum and maximum values of.. |
|||
Density | 1.09 - 1.22 g/cc | 0.0394 - 0.0441 lb/in³ | Average value: 1.15 g/cc Grade Count:11 |
Overview of materials for Nylon 612, Aramid Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Aramid Fiber Filled". Each property range of values reported is minimum and maximum values of.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Momentive Performance Materials RTV162 White Adhesive Sealant, Non-Corrosive Paste One-part totally non-corrosive alkoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: Non-corrosive bindi.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D 792 |
Shakespeare Isocorâ„¢ TT52SI Nylon 6 Terpolymer Isocorâ„¢ TT52SI multi-polymer is a linear polyamide with unique solubility characteristics and physical properties. Isocorâ„¢ TT52SI is easily processed and has a wide range of application.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA11 GB7 HS L 7% Glass Bead Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 7% Filler by WeightAdditive: Heat Stabilizer and LubricantFeatures: Heat Stabilized and LubricatedInformation provided by T.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Solvay MACKAM® 50-SB Surfactant Product Description: Mackam 50-SB is a high performance zwitterionic surfactant that has excellent lime soap dispersing properties and is stable over a wide pH range. It is compatible with anionic, .. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Solvay MIRATAINE® CBS Surfactant Description: Coconut acid derived amphoteric surfactant with good foaming/foam boosting properties. Displays excellent performance properties over broad pH ranges. Viscosity builder for anionic base.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
SABIC Innovative Plastics NORYL GTX GTX963 PPE+PA (Europe-Africa-Middle East) NORYL GTX963 is an unfilled impact modified material with excellent heat properties and good processability. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Solvay SOPROPHOR® S/25 Surfactant Description: Soprophor® S/25 is Tristyrylphenol ethoxylate, HLB = 14.5. It is nonionic multipurpose high performance emulsifier, soluble in water and most polar and aromatic solvents. Recommended.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Covestro Prism® CM-200 Polyurethane Solid RIM, MDI-based 2-Component Liquid System 0.125 in. thickness. RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and o.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
Denka MALECCA K-700 ABS A heat-resistant ABS resin based on "DENKA IP" – a Styrene-N-Phenylmaleimide copolymer. It has been designed as an easy-to-use resin by improving conventional heat-resistant ABS resins which had de.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | DAM; ISO 1183 |
DuPont Performance Polymers Zytel® FG408L NC010 Nylon 66
(Unverified Data**) Unreinforced Toughened Polyamide 66 with Developed for Food Contact Applications Zytel FG408L NC010 is a general purpose lubricated impact modified polyamide 66 resin with superior toughness for inj.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® BM 17 PA* Product description: Grilon BM 17 natural is a medium viscosity multi-polyamide with a low melting point. Grilon BM 17 natural has the following features: High flexibility and toughnessVery good ori.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Clariant Renol 6608-L Nylon 66, High Impact Modified, Lubricated Data provided by Clariant Masterbatches |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
Eurotec® Tecolen® CP20 MF20 NL XC30 PPCP, 20% mineral filled, flame retardant - halogen (RoHS compliant), heat stabilized, natural Information provided by Eurotec® |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
Eurotec® Tecomid® NB50 NL IT PA 6 super tough Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Adell AI-10 Nylon 66, Impact Modified Data provided by Adell Plastics, Inc. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
Adell BI-10 Nylon 6, Impact Modified Data provided by Adell Plastics, Inc. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | Part B |
Abatron AboCast 8103-20 High-Performance Dielectric Epoxy AboCast 8103-20 is a dielectric in/outdoor epoxy system with superior arc-track resistance, high voltage and heat resistance, low ash and ion content, and it is chlorine-free. This system is unique .. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183 |
Barlog Plastics KEBAFLEX P D35.1 Polyester-Elastomer, Shore D35 TPC-ETInformation provided by BARLOG plastics GmbH. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | AboCast 7802-1 |
Abatron AboCast 7802-1/AboCure 50-12 Epoxy AboCast 7802-1 is a clear resin with low viscosity (600-800 cps.) and a weight of 9.1 lbs/gallon. AboCure 50-12 is a clear converter for high rigidity, chemical, and temperature resistance (HDT: 101.. |
|||
Density | 1.09 g/cc | 0.0394 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP VERTON MV006BS PP LNP* VERTON* MV006BS is a compound based on Polypropylene resin containing 30% Long Glass Fiber. Added features of this grade include: Heat Stabilized, Burst Pressure, Structural, Chemically Coupl.. |