SABIC Innovative Plastics LNP LUBRICOMP RX01514 PA 66

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP RX01514 PA 66.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* LUBRICOMP* RX01514 is a compound based on Nylon 66 resin containing Proprietary Filler(s). Added feature of this material is: Wear Resistant.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/inÂ³	ISO 1183
	1.15 g/cc	0.0415 lb/inÂ³	ASTM D792
Moisture Absorption	1.10 %	1.10 %	50% RH, 24 hrs; ASTM D570
Linear Mold Shrinkage, Flow	0.010 - 0.012 cm/cm @Time 86400 sec	0.010 - 0.012 in/in @Time 24.0 hour	ASTM D955
	0.011 cm/cm @Time 86400 sec	0.011 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.012 - 0.014 cm/cm @Time 86400 sec	0.012 - 0.014 in/in @Time 24.0 hour	ASTM D955
	0.013 cm/cm @Time 86400 sec	0.013 in/in @Time 24.0 hour	ISO 294

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	71.0 MPa	10300 psi	ASTM D638
	78.0 MPa	11300 psi	ISO 527
Tensile Strength, Yield	80.0 MPa	11600 psi	ISO 527
	84.0 MPa	12200 psi	ASTM D638
Elongation at Break	19.1 %	19.1 %	ISO 527
	21.1 %	21.1 %	ASTM D638
Elongation at Yield	3.9 %	3.9 %	ISO 527
	4.2 %	4.2 %	ASTM D638
Tensile Modulus	3.40 GPa	493 ksi	1 mm/min; ISO 527
	3.44 GPa	499 ksi	50 mm/min; ASTM D638
Flexural Strength	96.0 MPa	13900 psi	ISO 178
Flexural Modulus	2.75 GPa	399 ksi	ASTM D790
	2.80 GPa	406 ksi	ISO 178
Izod Impact, Notched	0.420 J/cm	0.787 ft-lb/in	ASTM D256
Izod Impact, Unnotched	18.95 J/cm	35.50 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	251 kJ/mÂ²	119 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	29.0 J	21.4 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Impact Test	48.0 J	35.4 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.81	0.81	ASTM D3702 Modified
Coefficient of Friction, Static	0.62	0.62	ASTM D3702 Modified
K (wear) Factor	135 x 10^-8 mmÂ³/N-M	67.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	82.8 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	46.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	83.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	46.1 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	86.4 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	48.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	87.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	48.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	156 Â°C	313 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	183 Â°C @Thickness 3.20 mm	361 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	62.0 Â°C	144 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	66.0 Â°C @Thickness 3.20 mm	151 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: