Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Ravago Manufacturing Americas Hylon® N1040MHL Nylon 6/6 (DAM)

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Heat Stabilized
Manufacturer Ravago Manufacturing Americas, LLC
Trade Name Hylon®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Ravago Manufacturing Americas Hylon® N1040MHL Nylon 6/6 (DAM).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by Ravago.
Physical Properties Metric English Comments
Density 1.49 g/cc
0.0538 lb/in³
ASTM D792
Water Absorption 0.60 %
0.60 %
24 hrs; ASTM D570
Linear Mold Shrinkage 0.0070 - 0.010 cm/cm
0.0070 - 0.010 in/in
0.125 in; ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell M 94
94
ASTM D785
Tensile Strength at Break 96.5 MPa
14000 psi
ASTM D638
Elongation at Break 1.5 %
1.5 %
ASTM D638
Flexural Strength 159 MPa
23000 psi
ASTM D790
Flexural Modulus 6.21 GPa
900 ksi
ASTM D790
Izod Impact, Notched 0.481 J/cm
0.900 ft-lb/in
73°F; ASTM D256
Thermal Properties Metric English Comments
CTE, linear 48.6 µm/m-°C

@Temperature 20.0 °C
27.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Deflection Temperature at 0.46 MPa (66 psi) 238 °C
460 °F
Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 193 °C
380 °F
Unannealed; ASTM D648
Flammability, UL94 HB
HB
0.0590 in, BK
HB
HB
0.0590 in, NC
HB
HB
0.118 in, BK
HB
HB
0.118 in, NC
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+14 ohm-cm
1.00e+14 ohm-cm
ASTM D257
Dielectric Constant 3.9

@Frequency 100 Hz
3.9

@Frequency 100 Hz
ASTM D150
Dielectric Strength 18.9 kV/mm
480 kV/in
ASTM D149
Processing Properties Metric English Comments
Melt Temperature 282 - 299 °C
540 - 570 °F
Mold Temperature 65.6 - 98.9 °C
150 - 210 °F
Drying Temperature 73.9 °C
165 °F
Dry Time 2 - 4 hour
2 - 4 hour
Moisture Content 0.20 %
0.20 %
Back Pressure 0.138 - 0.414 MPa
20.0 - 60.0 psi
Screw Speed 40 - 120 rpm
40 - 120 rpm
Descriptive Properties Value Comments
Holding Pressure 750 to 1400 psi
Injection Rate Fast
Copyright © lookpolymers.com All Rights Reserved