POLYMER SEARCH

Raschig Group EPOXIDUR® 3580 EP Epoxy

Category	Polymer , Thermoset , Epoxy , Epoxy, Molded, Glass Fiber Filler , Filled/Reinforced Thermoset
Manufacturer	Raschig Group
Trade Name	EPOXIDUR®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Raschig Group EPOXIDUR® 3580 EP Epoxy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Glass-fiber reinforced and mineral filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties even with thin wall thicknesses and high temperatures. This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS).Processing: Injection and compression molding Primary application: Electrical partsInformation provided by the Raschig Group

Physical Properties	Metric	English	Comments
Specific Gravity	1.90 - 2.00 g/cc	1.90 - 2.00 g/cc	ISO 1183
Apparent Bulk Density	0.600 - 0.900 g/cc	0.0217 - 0.0325 lb/in³	ISO 60
Water Absorption	<= 0.10 % @Temperature 23.0 °C, Time 86400 sec	<= 0.10 % @Temperature 73.4 °F, Time 24.0 hour	ISO 62
Linear Mold Shrinkage	0.0020 - 0.0040 cm/cm	0.0020 - 0.0040 in/in	(longitudinal) Injection and Compression; ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	30.0 - 50.0 MPa	4350 - 7250 psi	Injection and Compression; ISO 527
Modulus of Elasticity	14.0 - 16.0 GPa	2030 - 2320 ksi	Injection and Compression; ISO 527
Flexural Strength	70.0 - 100 MPa	10200 - 14500 psi	Injection and Compression; ISO 178
Flexural Modulus	17.0 - 20.0 GPa	2470 - 2900 ksi	Injection and Compression; ISO 178
Compressive Strength	150 - 180 MPa	21800 - 26100 psi	ISO 604
Charpy Impact Unnotched	0.400 - 0.600 J/cm² @Temperature 23.0 °C	1.90 - 2.86 ft-lb/in² @Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eU
Charpy Impact, Notched	0.200 - 0.400 J/cm² @Temperature 23.0 °C	0.952 - 1.90 ft-lb/in² @Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	15.0 - 20.0 µm/m-°C @Temperature 50.0 - 150 °C	8.33 - 11.1 µin/in-°F @Temperature 122 - 302 °F	ISO 11359-2
Thermal Conductivity	0.400 - 0.600 W/m-K	2.78 - 4.16 BTU-in/hr-ft²-°F	ASTM E1461
Maximum Service Temperature, Air	180 °C @Time 7.20e+7 sec	356 °F @Time 20000 hour	IEC 60216/T1
	240 °C @Time <=180000 sec	464 °F @Time <=50.0 hour	IEC 60216/T1
Deflection Temperature at 0.46 MPa (66 psi)	>= 200 °C	>= 392 °F	Injection; ISO 75-B
Deflection Temperature at 1.8 MPa (264 psi)	>= 200 °C	>= 392 °F	Injection and Compression; ISO 75-A
Deflection Temperature at 8.0 MPa	180 - 200 °C	356 - 392 °F	Injection and Compression; ISO 75-C
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	V-0 @Thickness 6.00 mm	V-0 @Thickness 0.236 in
Shrinkage	<= 0.050 % @Temperature 110 °C, Time 605000 sec	<= 0.050 % @Temperature 230 °F, Time 168 hour	ISO 2577

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 - 1.00e+16 ohm-cm	1.00e+15 - 1.00e+16 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 - 1.00e+15 ohm	1.00e+14 - 1.00e+15 ohm	IEC 60093
Dielectric Constant	4.0 - 6.0 @Frequency 1.00e+6 Hz	4.0 - 6.0 @Frequency 1.00e+6 Hz	IEC 60250
	5.0 - 7.0 @Frequency 100 Hz	5.0 - 7.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	30.0 - 40.0 kV/mm	762 - 1020 kV/in	IEC 60243-1
Dissipation Factor	0.010 - 0.030 @Frequency 1.00e+6 Hz	0.010 - 0.030 @Frequency 1.00e+6 Hz	IEC 60250
	0.030 - 0.050 @Frequency 100 Hz	0.030 - 0.050 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	>= 250 V	>= 250 V	CTI; IEC 60112

Processing Properties	Metric	English	Comments
Shelf Life	6.00 Month @Temperature <=20.0 °C	6.00 Month @Temperature <=68.0 °F

Descriptive Properties	Value	Comments
Arc Resistance	4 Stufe	ASTM D495
Glow wire flammability test	900/1	IEC 60695 2-12
Glow wire ignitability test	900/1	IEC 60695 2-13
Water Absorption	<10 mg	24h/23°C; ISO 62

Users viewing this material also viewed the following: