Polymer Resources TPSF-G10 Polybutylene Terephthalate, Structural Foam, 10% Glass Reinforced

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 10% Glass Fiber Filled
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources TPSF-G10 Polybutylene Terephthalate, Structural Foam, 10% Glass Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Polybutylene Terephthalate, Structural Foam, 10% Glass ReinforcedProcess: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.26 g/cc	1.26 g/cc	ASTM D792
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	ASTM D955
Melt Flow	8.0 - 18 g/10 min @Load 2.16 kg, Temperature 250 °C	8.0 - 18 g/10 min @Load 4.76 lb, Temperature 482 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	72.4 MPa	10500 psi	ASTM D638
Tensile Strength, Yield	72.4 MPa	10500 psi	ASTM D638
Flexural Strength	103 MPa	15000 psi	ASTM D790
Flexural Modulus	2.96 GPa	430 ksi	ASTM D790
Izod Impact, Notched	0.534 J/cm @Temperature 22.8 °C	1.00 ft-lb/in @Temperature 73.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	32.4 µm/m-°C @Temperature -20.0 - 150 °C	18.0 µin/in-°F @Temperature -4.00 - 302 °F	ASTM E831
Deflection Temperature at 0.46 MPa (66 psi)	138 °C	280 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	121 °C	250 °F	ASTM D648
Vicat Softening Point	221 °C	430 °F	120°C/h, 50 N; ASTM D1525
UL RTI, Electrical	105 °C @Thickness 1.50 mm	221 °F @Thickness 0.0591 in	UL 746
	105 °C @Thickness 3.00 mm	221 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical with Impact	105 °C @Thickness 1.50 mm	221 °F @Thickness 0.0591 in	UL 746
	105 °C @Thickness 3.00 mm	221 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical without Impact	105 °C @Thickness 1.50 mm	221 °F @Thickness 0.0591 in	UL 746
	105 °C @Thickness 3.00 mm	221 °F @Thickness 0.118 in	UL 746
Flammability, UL94	HB @Thickness 1.59 mm	HB @Thickness 0.0626 in
	HB @Thickness 3.17 mm	HB @Thickness 0.125 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+17 ohm-cm	1.00e+17 ohm-cm	ASTM D257
Dielectric Constant	3.5 @Frequency 1000 Hz	3.5 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	27.2 kV/mm	690 kV/in	ASTM D149
Dissipation Factor	0.0014 @Frequency 1000 Hz	0.0014 @Frequency 1000 Hz	ASTM D150
	0.0046 @Frequency 1.00e+9 Hz	0.0046 @Frequency 1.00e+9 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	238 - 254 °C	460 - 490 °F
Middle Barrel Temperature	243 - 260 °C	470 - 500 °F
Front Barrel Temperature	249 - 266 °C	480 - 510 °F
Melt Temperature	249 - 260 °C	480 - 500 °F
Mold Temperature	71.1 - 93.3 °C	160 - 200 °F
Drying Temperature	82.2 - 121 °C	180 - 250 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Users viewing this material also viewed the following: