Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LG Chemical LUMID LW4009A(W) PA6+GF/MF40%, Low Warpage

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Glass/Mineral Filled
Manufacturer LG Chemical
Trade Name LUMID
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LG Chemical LUMID LW4009A(W) PA6+GF/MF40%, Low Warpage.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Feature: Injection Molding, PA6+GF/MF40%, Low WarpageApplication: Automotive (Timing Belt Cover)CAS No. 25038-54-4, 13983-17-0 and 65997-17-3Information provided by LG Chemical
Physical Properties Metric English Comments
Specific Gravity 1.49 g/cc
1.49 g/cc
ASTM D792
Water Absorption 0.90 %
0.90 %
ASTM D570
Linear Mold Shrinkage, Flow 0.0050 - 0.011 cm/cm

@Thickness 3.20 mm
0.0050 - 0.011 in/in

@Thickness 0.126 in
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell R 121
121
ASTM D785
Tensile Strength, Yield 127 MPa

@Thickness 3.20 mm
18500 psi

@Thickness 0.126 in
5mm/min; ASTM D638
Elongation at Break 4.0 %

@Thickness 3.20 mm
4.0 %

@Thickness 0.126 in
5mm/min; ASTM D638
Flexural Yield Strength 196 MPa

@Thickness 3.20 mm
28400 psi

@Thickness 0.126 in
1.3mm/min; ASTM D790
Flexural Modulus 7.35 GPa

@Thickness 3.20 mm
1070 ksi

@Thickness 0.126 in
1.3mm/min; ASTM D790
Izod Impact, Notched 0.588 J/cm

@Thickness 3.20 mm,
Temperature 23.0 °C
1.10 ft-lb/in

@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 40.0 µm/m-°C
22.2 µin/in-°F
ASTM D696
Melting Point 220 °C
428 °F
ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi) 200 °C

@Thickness 6.40 mm
392 °F

@Thickness 0.252 in
Unannealed; ASTM D648
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
ASTM D257
Dielectric Constant 3.0

@Frequency 1.00e+6 Hz
3.0

@Frequency 1.00e+6 Hz
ASTM D150
Dielectric Strength 21.0 kV/mm

@Thickness 1.00 mm
533 kV/in

@Thickness 0.0394 in
ASTM D149
Arc Resistance 130 sec
130 sec
ASTM D495
Processing Properties Metric English Comments
Rear Barrel Temperature 245 - 265 °C
473 - 509 °F
Injection Molding
Middle Barrel Temperature 255 - 280 °C
491 - 536 °F
Injection Molding
Front Barrel Temperature 255 - 285 °C
491 - 545 °F
Injection Molding
Nozzle Temperature 255 - 285 °C
491 - 545 °F
Injection Molding
Melt Temperature 255 - 285 °C
491 - 545 °F
Injection Molding
Mold Temperature 80.0 - 100 °C
176 - 212 °F
Injection Molding
Drying Temperature 80.0 - 100 °C
176 - 212 °F
Injection Molding
Dry Time 4.00 - 5.00 hour
4.00 - 5.00 hour
Injection Molding
Copyright © lookpolymers.com All Rights Reserved