LG Chemical 95HCTC SAN, High Transparency, Heat Resistance, Chemical Resistance

Category	Polymer , Thermoplastic , SAN Polymer
Manufacturer	LG Chemical
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical 95HCTC SAN, High Transparency, Heat Resistance, Chemical Resistance.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Feature: Injection Molding, SAN, High Transparency, Heat Resistance, Chemical ResistanceApplication: Lighter, Cosmetic Container, ToothbrushCAS No. 9003-54-7Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.08 g/cc	1.08 g/cc	ASTM D792
Maximum Moisture Content	0.010	0.010	Injection Molding
Linear Mold Shrinkage, Flow	0.0040 - 0.0070 cm/cm @Thickness 3.20 mm	0.0040 - 0.0070 in/in @Thickness 0.126 in	ASTM D955
Melt Flow	1.0 g/10 min @Load 5.00 kg, Temperature 200 Â°C	1.0 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM D1238
	5.0 g/10 min @Load 3.80 kg, Temperature 230 Â°C	5.0 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM D1238
	14 g/10 min @Load 10.0 kg, Temperature 220 Â°C	14 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	124	124	ASTM D785
Tensile Strength, Yield	81.4 MPa @Thickness 3.20 mm	11800 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	7.0 % @Thickness 3.20 mm	7.0 % @Thickness 0.126 in	50mm/min; ASTM D638
Tensile Modulus	3.35 GPa @Thickness 3.20 mm	486 ksi @Thickness 0.126 in	1 mm/min; ASTM D638
Flexural Yield Strength	143 MPa @Thickness 3.20 mm	20800 psi @Thickness 0.126 in	15mm/min; ASTM D790
Flexural Modulus	3.79 GPa @Thickness 3.20 mm	549 ksi @Thickness 0.126 in	15mm/min; ASTM D790
Izod Impact, Notched	0.0981 J/cm @Thickness 6.40 mm, Temperature 23.0 Â°C	0.184 ft-lb/in @Thickness 0.252 in, Temperature 73.4 Â°F	ASTM D256
	0.0981 J/cm @Thickness 6.40 mm, Temperature -30.0 Â°C	0.184 ft-lb/in @Thickness 0.252 in, Temperature -22.0 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	>= 93.0 Â°C @Thickness 6.40 mm	>= 199 Â°F @Thickness 0.252 in	Unannealed; ASTM D648
Vicat Softening Point	103 Â°C @Load 5.00 kg	217 Â°F @Load 11.0 lb	50Â°C/h; ASTM D1525
UL RTI, Electrical	50.0 Â°C @Thickness >=1.50 mm	122 Â°F @Thickness >=0.0591 in
	50.0 Â°C @Thickness >=3.00 mm	122 Â°F @Thickness >=0.118 in
UL RTI, Mechanical with Impact	50.0 Â°C @Thickness >=1.50 mm	122 Â°F @Thickness >=0.0591 in
	50.0 Â°C @Thickness >=3.00 mm	122 Â°F @Thickness >=0.118 in
UL RTI, Mechanical without Impact	50.0 Â°C @Thickness <=1.50 mm	122 Â°F @Thickness <=0.0591 in
	50.0 Â°C @Thickness <=3.00 mm	122 Â°F @Thickness <=0.118 in
Flammability, UL94	HB @Thickness >=1.60 mm	HB @Thickness >=0.0630 in
	HB @Thickness >=3.20 mm	HB @Thickness >=0.126 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm
Dielectric Strength	28.0 kV/mm	711 kV/in
Arc Resistance	120 - 180 sec	120 - 180 sec	ASTM D495
Comparative Tracking Index	400 - 600 V	400 - 600 V
Hot Wire Ignition, HWI	7.0 - 15 sec	7.0 - 15 sec
	15 - 30 sec	15 - 30 sec
High Amp Arc Ignition, HAI	>= 120 arcs	>= 120 arcs
	>= 120 arcs	>= 120 arcs

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	170 - 190 Â°C	338 - 374 Â°F	Injection Molding
Middle Barrel Temperature	180 - 200 Â°C	356 - 392 Â°F	Injection Molding
Front Barrel Temperature	190 - 210 Â°C	374 - 410 Â°F	Injection Molding
Nozzle Temperature	190 - 220 Â°C	374 - 428 Â°F	Injection Molding
Melt Temperature	190 - 220 Â°C	374 - 428 Â°F	Injection Molding
Mold Temperature	40.0 - 70.0 Â°C	104 - 158 Â°F	Injection Molding
Drying Temperature	80.0 Â°C	176 Â°F	Injection Molding
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	Injection Molding
Back Pressure	29.4 - 58.8 MPa	4260 - 8530 psi	Injection Molding
Screw Speed	30 - 60 rpm	30 - 60 rpm	Injection Molding

Users viewing this material also viewed the following: