Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Idemitsu Kosan Xarec® WA 204 SPS, 20% Glass Filled

Category Polymer , Thermoplastic , Polystyrene (PS) , Syndiotactic Polystyrene (SPS) , Syndiotactic Polystyrene (SPS) with Glass or Carbon Fiber
Manufacturer Idemitsu Kosan Co., Ltd.
Trade Name Xarec®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Idemitsu Kosan Xarec® WA 204 SPS, 20% Glass Filled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Crystalline Polymer, Glass Filled, Impact Modified. Used in Automotive and Industrial applications.
Physical Properties Metric English Comments
Density 1.17 g/cc
0.0423 lb/in³
ISO 1183 B
Filler Content 20 %
20 %
Glass
Moisture Absorption 0.0100 %
0.0100 %
24 hours, 50% RH
Linear Mold Shrinkage, Flow 0.002 - 0.004 cm/cm
0.002 - 0.004 in/in
Linear Mold Shrinkage, Transverse 0.003 - 0.005 cm/cm
0.003 - 0.005 in/in
Mechanical Properties Metric English Comments
Tensile Strength, Yield 105 MPa
15200 psi
ISO 527
Elongation at Break 2.3 %
2.3 %
ISO 527
Tensile Modulus 7.30 GPa
1060 ksi
ISO 527
Flexural Strength 160 MPa
23200 psi
ISO 178
Flexural Modulus 6.70 GPa
972 ksi
ISO 178
Izod Impact, Notched (ISO) 11.0 kJ/m²

@Temperature 23.0 °C
 5.23 ft-lb/in²

@Temperature 73.4 °F
 ISO 180
Izod Impact, Unnotched (ISO) 37.0 kJ/m²
17.6 ft-lb/in²
ISO 180
Charpy Impact Unnotched 4.20 J/cm²

@Temperature 23.0 °C
 20.0 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Charpy Impact, Notched 1.10 J/cm²

@Temperature 23.0 °C
 5.24 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 29.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 16.1 µin/in-°F

@Temperature -22.0 - 86.0 °F
CTE, linear, Transverse to Flow 61.0 µm/m-°C
33.9 µin/in-°F
Deflection Temperature at 0.46 MPa (66 psi) 265 °C
509 °F
ISO 75B
Deflection Temperature at 1.8 MPa (264 psi) 235 °C
455 °F
ISO 75A
UL RTI, Electrical 110 °C
230 °F
UL746B
UL RTI, Mechanical with Impact 105 °C
221 °F
UL746B
UL RTI, Mechanical without Impact 110 °C
230 °F
UL746B
Flammability, UL94 HB

@Thickness 0.750 mm
 HB

@Thickness 0.0295 in
Electrical Properties Metric English Comments
Volume Resistivity 1e+16 ohm-cm
1e+16 ohm-cm
IEC 93
Dielectric Constant 3.1
3.1
IEC 250
Dielectric Strength 28.0 kV/mm
711 kV/in
ASTM D149
Dissipation Factor 0.0010
0.0010
IEC60250
Arc Resistance 120 - 180 sec
120 - 180 sec
ASTM D495
Comparative Tracking Index 400 - 600 V
400 - 600 V
IEC 60112
Hot Wire Ignition, HWI 60 - 120 sec

@Thickness 1.50 mm
 60 - 120 sec

@Thickness 0.0591 in
 UL 746A
High Amp Arc Ignition, HAI >= 120 arcs

@Thickness 1.50 mm
 >= 120 arcs

@Thickness 0.0591 in
 UL 746A
High Voltage Arc-Tracking Rate, HVTR 0.000 - 10.0 mm/min
0.000 - 0.394 in/min
UL746A
Processing Properties Metric English Comments
Melt Temperature 285 - 310 °C
545 - 590 °F
pre-drying not required
Mold Temperature 50.0 - 80.0 °C
122 - 176 °F
130 - 155 °C
266 - 311 °F
for optimal gloss and heat resistance
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved