POLYMER SEARCH

EMS-Grivory Grivory® BGM-30 X PA6-(GF+MD)30

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® BGM-30 X PA6-(GF+MD)30.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grilon BGM-30 X is a heat stabilized PA 6 injection molding grade with a 30 % reinforcement combination (mineral and glass fiber). Grilon BGM-30 X has the following important properties: High stiffnessLow warpageGood surface finish Grilon BGM-30 X is used typically for large area parts with low warpage such as radiator grilles or engine covers.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.38 g/cc	0.0499 lb/in³	ISO 1183
Water Absorption	8.0 %	8.0 %	ISO 62
Moisture Absorption	2.50 %	2.50 %	ISO 62
Linear Mold Shrinkage, Flow	0.0030 cm/cm	0.0030 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	90.0 MPa	13100 psi	conditioned; ISO 2039-1
	205 MPa	29700 psi	dry; ISO 2039-1
Tensile Strength at Break	45.0 MPa	6530 psi	conditioned; ISO 527-1/-2
	105 MPa	15200 psi	dry; ISO 527-1/-2
Elongation at Break	3.0 %	3.0 %	dry; ISO 527-1/-2
	15 %	15 %	conditioned; ISO 527-1/-2
Tensile Modulus	2.30 GPa	334 ksi	conditioned; ISO 527-1/-2
	6.50 GPa	943 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	4.00 J/cm²	19.0 ft-lb/in²	dry; ISO 179/1eU
	6.00 J/cm²	28.6 ft-lb/in²	conditioned; ISO 179/1eU
	3.50 J/cm² @Temperature 30.0 °C	16.7 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
	4.00 J/cm² @Temperature 30.0 °C	19.0 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	dry; ISO 179/1eA
	1.00 J/cm²	4.76 ft-lb/in²	conditioned; ISO 179/1eA
	0.300 J/cm² @Temperature 30.0 °C	1.43 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	0.300 J/cm² @Temperature 30.0 °C	1.43 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	35.0 µm/m-°C	19.4 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	70.0 µm/m-°C	38.9 µin/in-°F	ISO 11359-1/-2
Melting Point	222 °C	432 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	180 °C	356 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	175 °C	347 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	50.0 °C	122 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	conditioned; IEC 60093
	1.00e+14 ohm-cm	1.00e+14 ohm-cm	dry; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	30.0 kV/mm	762 kV/in	conditioned; IEC 60243-1
	34.0 kV/mm	864 kV/in	dry; IEC 60243-1
Comparative Tracking Index	500 V	500 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Cooling and climate control
Form	Granules
Processing	Injection Molding

Users viewing this material also viewed the following: