DuPont Performance Polymers Zytel® 79G13HSL NC010 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 79G13HSL NC010 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

13% Glass Reinforced Toughened Heat Stabilized Polyamide 66 Zytel 79G13HSL is a 13% glass fiber reinforced heat stabilized lubricated slightly toughened polyamide 66 for injection molding. It has improved impact resistance.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.04 g/cc	0.0376 lb/in³
	1.21 g/cc	0.0437 lb/in³	DAM; ISO 1183
Water Absorption	6.5 % @Thickness 2.00 mm	6.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.20 % @Thickness 2.00 mm	2.20 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity	46700 cP @Shear Rate 5000 1/s, Temperature 305 °C	46700 cP @Shear Rate 5000 1/s, Temperature 581 °F	ISO 11403-1 -2
	50730 cP @Shear Rate 5000 1/s, Temperature 295 °C	50730 cP @Shear Rate 5000 1/s, Temperature 563 °F	ISO 11403-1 -2
	55340 cP @Shear Rate 5000 1/s, Temperature 285 °C	55340 cP @Shear Rate 5000 1/s, Temperature 545 °F	ISO 11403-1 -2
	141400 cP @Shear Rate 500 1/s, Temperature 305 °C	141400 cP @Shear Rate 500 1/s, Temperature 581 °F	ISO 11403-1 -2
	157800 cP @Shear Rate 500 1/s, Temperature 295 °C	157800 cP @Shear Rate 500 1/s, Temperature 563 °F	ISO 11403-1 -2
	176700 cP @Shear Rate 500 1/s, Temperature 285 °C	176700 cP @Shear Rate 500 1/s, Temperature 545 °F	ISO 11403-1 -2
Viscosity Test	150 cm³/g	150 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.0050 cm/cm	0.0050 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	74	74	50%RH; ISO 2039-2
	90	90	DAM; ISO 2039-2
Tensile Strength at Break	67.0 MPa	9720 psi	50%RH; ISO 527-1/-2
	118 MPa	17100 psi	DAM; ISO 527-1/-2
Elongation at Break	4.0 %	4.0 %	DAM; ISO 527-1/-2
	10 %	10 %	50%RH; ISO 527-1/-2
Tensile Modulus	3.70 GPa	537 ksi	50%RH; ISO 527-1/-2
	5.10 GPa	740 ksi	DAM; ISO 527-1/-2
Izod Impact, Notched (ISO)	8.00 kJ/m²	3.81 ft-lb/in²	DAM; ISO 180/1A
	9.00 kJ/m²	4.28 ft-lb/in²	50%RH; ISO 180/1A
	4.00 kJ/m² @Temperature -30.0 °C	1.90 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1A
	6.00 kJ/m² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1A
Charpy Impact Unnotched	5.90 J/cm²	28.1 ft-lb/in²	50%RH; ISO 179/1eU
	6.70 J/cm²	31.9 ft-lb/in²	DAM; ISO 179/1eU
	5.40 J/cm² @Temperature -30.0 °C	25.7 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eU
	5.90 J/cm² @Temperature -30.0 °C	28.1 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
Charpy Impact, Notched	0.800 J/cm²	3.81 ft-lb/in²	DAM; ISO 179/1eA
	1.40 J/cm²	6.66 ft-lb/in²	50%RH; ISO 179/1eA
	0.600 J/cm² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
	0.600 J/cm² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour	4030 MPa @Time 3600 sec	585000 psi @Time 1.00 hour	50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours	3180 MPa @Time 3.60e+6 sec	461000 psi @Time 1000 hour	50%RH; ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	50.0 µm/m-°C	27.8 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	130 µm/m-°C	72.2 µin/in-°F	DAM; ISO 11359-1/-2
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	260 °C	500 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	242 °C	468 °F	DAM; ISO 75-1/-2
Vicat Softening Point	239 °C	462 °F	DAM; 50°C/h 50N; ISO 306
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	DAM; IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Comparative Tracking Index	250 V	250 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Additives	Lubricants
Delivery Form	Pellets
Odour	class 4	VDA 270; C3
Processing	Injection Moulding
Regional Availability	Europe
	Near East/Africa
Special Characteristics	Heat stabilised or stable to heat
UL recognition	UL	DAM

Users viewing this material also viewed the following: