Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultraform® S2320 0035 LEV POM

Category Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Unreinforced
Manufacturer BASF
Trade Name Ultraform®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF BASF Ultraform® S2320 0035 LEV POM.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Is a POM, free-flowing and rapidly solidifying standard grade with reduced emission potential for injection molding.Information provided by BASF
Physical Properties Metric English Comments
Bulk Density 0.850 g/cc
0.0307 lb/in³
Density 1.40 g/cc
0.0506 lb/in³
ISO 1183
Water Absorption 0.80 %
0.80 %
Saturation; ISO 62
Moisture Absorption at Equilibrium 0.20 %
0.20 %
23°C; 50% RH; ISO 62
Linear Mold Shrinkage, Flow 0.021 cm/cm
0.021 in/in
ISO 2577
Linear Mold Shrinkage, Transverse 0.021 cm/cm
0.021 in/in
ISO 2577
Melt Flow 15.4 g/10 min

@Load 2.16 kg,
Temperature 190 °C
15.4 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
Mechanical Properties Metric English Comments
Ball Indentation Hardness 130 MPa

@Load 36.5 kg,
Time 30.0 sec
18900 psi

@Load 80.5 lb,
Time 0.00833 hour
ISO 2039-1
Tensile Strength, Yield 63.0 MPa
9140 psi
50 mm/min; ISO 527-2
Elongation at Break 32 %
32 %
ISO 527-2
Elongation at Yield 11 %
11 %
ISO 527-2
Modulus of Elasticity 2.45 GPa
355 ksi
ISO 527-2
Charpy Impact Unnotched 21.0 J/cm²

@Temperature -30.0 °C
99.9 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eU
25.0 J/cm²

@Temperature 23.0 °C
119 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched 0.600 J/cm²

@Temperature -30.0 °C
2.86 ft-lb/in²

@Temperature -22.0 °F
ISO 179/1eA
0.650 J/cm²

@Temperature 23.0 °C
3.09 ft-lb/in²

@Temperature 73.4 °F
ISO 179/1eA
Tensile Creep Modulus, 1000 hours 1000 MPa
145000 psi
ISO 899-1
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 110 µm/m-°C

@Temperature 23.0 - 55.0 °C
61.1 µin/in-°F

@Temperature 73.4 - 131 °F
DIN 53752
Melting Point 167 °C
333 °F
DIN 53765
Maximum Service Temperature, Air 100 °C
212 °F
Deflection Temperature at 1.8 MPa (264 psi) 95.0 °C
203 °F
ISO 75-2
Vicat Softening Point 150 °C
302 °F
ISO 306
Decomposition Temperature >= 240 °C
>= 464 °F
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+13 ohm-cm
1.00e+13 ohm-cm
IEC 60093
Surface Resistance 1.00e+15 ohm
1.00e+15 ohm
IEC 60093
Dielectric Constant 3.8

@Frequency 1.00e+6 Hz
3.8

@Frequency 1.00e+6 Hz
IEC 60250
3.9

@Frequency 100 Hz
3.9

@Frequency 100 Hz
IEC 60250
Dielectric Strength 36.0 kV/mm
914 kV/in
IEC 60243-1
Dissipation Factor 0.0030

@Frequency 100 Hz
0.0030

@Frequency 100 Hz
IEC 60250
0.0060

@Frequency 1.00e+6 Hz
0.0060

@Frequency 1.00e+6 Hz
IEC 60250
Comparative Tracking Index 600 V
600 V
Test solution A; IEC 60112
600 V
600 V
Test solution B; IEC 60112
Processing Properties Metric English Comments
Processing Temperature 200 °C
392 °F
Hopper Throat
Zone 1 200 °C
392 °F
Feed zone
Zone 2 200 °C
392 °F
Compression
Zone 3 200 °C
392 °F
Metering-zone
Zone 4 200 °C
392 °F
Nozzle
Melt Temperature 200 °C
392 °F
Optimal
190 - 230 °C
374 - 446 °F
Injection-molding
Mold Temperature 60.0 - 120 °C
140 - 248 °F
Injection-molding
90.0 °C
194 °F
Optimal
Drying Temperature 100 °C
212 °F
Dry Time 3 hour
3 hour
Descriptive Properties Value Comments
Commercial Status Europe
Ignition Temperature 320 - 340°C
ASTM D1929
Peripheral screw speed <0.3 m/s
Primary Processing Technique Injection Molding
Copyright © lookpolymers.com All Rights Reserved