Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
Plastcom SLOVAMID 66 GF 45 PA66, 45% glass fibre FeaturesChemically reinforced with 45% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. W.. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | STN IEC 60243 |
Plastcom SLOVAMID 66 GF 50 Polyamide 66, 50% Glass Fiber FeaturesChemically reinforced with 50% glass fiber, suitable for mouldings with high strength and toughness also at low temperatures. Used in the automotive, engineering and electrical industry. W.. |
|||
Dielectric Strength | 90.0 - 105 kV/mm | 2290 - 2670 kV/in | Air, 0.125mm Thk Tape; ASTM D149 |
Dalau Dalcon 086 100% Virgin PTFE modified polymer Applications & Industries: General: The static and dynamic friction coefficient are numerically equal, consequently no ’Stick Slip’ occurs. Modified PTFE has an advantage over Homopolymer (Normal .. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA301G2 Nylon 6.6 for Injection Molding, 10% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 10% Glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA301G7 Nylon 6.6, Heat Stabilized 35% Glass Fiber Heat stabilized 35% glass fiber reinforced polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA303G50 Nylon 6.6, 50% Glass Fiber 50% glass fiber reinforced, heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA303G6 Nylon 6.6, Heat Stabilized, 30% Glass Fiber 30% glass fiber reinforced, heat stabilized and hydrolysis resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA309G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, UV stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA313G43 Nylon 66 for Injection Molding, 43% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 43% Glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA4501G6 Nylon 66, 30% Glass Fiber Reinforced, Low Friction 30% Glass fiber reinforced Nylon 66 for low friction applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA830 Nylon 6.6, Impact Modified Impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA862 Nylon 6.6 for Injection Molding, High Impact Modified High impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA870G33 Nylon 6.6, 33% Glass Fiber 33% glass fiber reinforced, impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA880 Nylon 6.6, Impact Modified Super tough - impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek RA331G6 Nylon 66 for Injection Molding, 30% Glass-Fiber Reinforced 30% Glass-fiber reinforced Nylon 66 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA845 Nylon 6.6, Impact Modified Improved impact polyamide 6.6 for good resistance to low temp for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA846 Nylon 6.6, Impact Modified Impact modified and heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | ASTM D149 |
Westlake Plastics Lennite® Ultra High Molecular Weight Polyethylene Lennite UHMW-PE is a low friction engineering plastic with excellent chemical resistant and abrasive wear resistance. It is widely used in conveyors, packaging machinery, and food processing machin.. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PA310G8BK10 Nylon 6.6 for injection Molding, 40% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 40% Glass fiber reinforced Nylon 6.6 for injection molding applications. Approved and listed by NSF/ANSI 61 International.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek PA840G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek PB330I6 Nylon 6 for Injection Molding, 30% Mineral and Glass-fiber Filled 30% Mineral and glass-fiber filled, heat stabilized and low warpage Nylon 6 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | IEC 60250 |
Polyram PlusTek RA303G33 Nylon 66 for Injection Molding, 33% Glass Fiber Reinforced, Heat Stabilized, Hydrolysis Resistant 33% Glass fiber reinforced, heat stabilized and hydrolysis resistant Nylon 66 for injection molding applications.Information provided by Polyram. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA303G4 Nylon 6.6, 20% Glass Fiber 20% glass fiber reinforced, heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Polyram PlusTek RA303G7 Nylon 6.6, 35% Glass Fiber 35% Glass fiber reinforced, heat stabilized and hydrolysis resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Dielectric Strength | 90.0 - 105 kV/mm | 2290 - 2670 kV/in | Air, 0.125mm Thk Tape; ASTM D149 |
Dalau Dalcon 086 100% Virgin PTFE modified polymer Applications & Industries: General: The static and dynamic friction coefficient are numerically equal, consequently no ’Stick Slip’ occurs. Modified PTFE has an advantage over Homopolymer (Normal .. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | ASTM D149, IEC 243 |
EPICHEM PA 6 Polyamide 6 Characteristics: medium viscosity, general purpose |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
BASF Luranyl® KR 2401 Polyphenylene Ether + Styrene-Butadiene Blend, Impact Grade Base grade with a balanced combination of impact strength and stiffness. Uses include: parts of vehicle interiors, air ducts and loudspeaker housings.Data was collected by ISO methods and provided .. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
BASF Luranyl® KR 2452/3 Polyphenylene Ether + Styrene-Butadiene Blend This grade, which contains a halogen-free flame-retardant, is especially resistant to heat deformation. Applications include: functional electrical parts (e.g. switches, transformer housings, defle.. |
|||
Dielectric Strength | 90.0 kV/mm | 2290 kV/in | |
BASF Luranyl® KR 2456/3 Polyphenylene Ether + Styrene-Butadiene Blend Heat resistant grade containing halogen-free flame-retardant. Mainly used for functional electronic parts that must meet tough fire-safety legislation.Data was collected by ISO methods and provided.. |
|||
Dielectric Strength | 90.0 - 95.0 kV/mm | 2290 - 2410 kV/in | Average value: 91.7 kV/mm Grade Count:9 |
Overview of materials for Polyphenylene Ether + Styrene-Butadiene Blend This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Ether + Styrene-Butadiene Blend". Each property range of values reported is minimum and ma.. |