- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Polyram PlusTek PA840G6 Nylon 6.6, 30% Glass Fiber
Polyram PlusTek PA840G6 Nylon 6.6, 30% Glass Fiber
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PA840G6 Nylon 6.6, 30% Glass Fiber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
30% glass fiber reinforced, impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.34 g/cc | 0.0484 lb/in³ | DIN 53479 |
| Water Absorption | 5.0 % | 5.0 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 1.5 % | 1.5 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 145 MPa | 21000 psi | ASTM-D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM-D638 |
| Flexural Strength | 210 MPa | 30500 psi | ASTM D790 |
| Flexural Modulus | 6.50 GPa | 943 ksi | ASTM-D790 |
| Izod Impact, Notched | 1.70 J/cm @Temperature 23.0 °C |
3.18 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 256 °C | 493 °F | |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
| >= 200 °C | >= 392 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 240 °C | 464 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | DIN 53461 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | DIN 53482 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz |
3.5 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 90.0 kV/mm | 2290 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Nye Lubricants 2000 (RL) Synthetic Oil
- ExxonMobil Escorene® LD-737 EVA Copolymer for Specialty Applications (discontinued **)
- Plenco 5440 Black General Purpose Phenolic Molding Compound (discontinued **)
- Gwent Electronic Materials C2030701D3 Solderable Silver Ink
- Styron XZ 94462.04 Carboxylated SB
- Solvay RHODAPHOSE® TG PHOS REAGENT Phosphorus Derivative
- ChevronTexaco Cetus® PAO 46
- 3M 9576 Splicing Tape
- Solvay Specialty Polymers Hylar® MP20 PVDF Polyvinylidene Fluoride (discontinued **)
Copyright © lookpolymers.com All Rights Reserved