Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 0.46 MPa (66 psi) = 195 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75/2Bf
Radici Radilon® AHS (dry) Nylon 66
General purposeInformation provided by Radici group.
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75
Nilit FRIANYL B63 H-SG30 Nylon 6 for injection molding, 30% mineral filled
Nylon 6 for injection molding, heat stabilized (dark natural color).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75
Nilit FRIANYL B63 MG30 Nylon 6 for injection molding, 30% mineral filled
Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Deflection Temperature at 0.46 MPa (66 psi) 195 °C

@Thickness 3.20 mm
383 °F

@Thickness 0.126 in
ASTM D648
Covestro Apec® DP9-9371 High-Heat Polycarbonate, General Purpose  (discontinued **)
Information provided by Bayer Corporation, Plastics DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially adopted its new name – Covestro. This produ..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
DAM; ISO 75-1/-2
DuPont Performance Polymers Zytel® 103FHS BKB009 Nylon 66  (Unverified Data**)
Zytel® 103FHS BKB009 is a heat stabilized, internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont Perf..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C

@Thickness 6.40 mm
383 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical LUMAX GP5200B PBT+ABS+GF20%
Description: Injection Molding Grade, PBT+ABS+GF20%, General PurposeApplication: E&E (Speaker Frame)CAS: 9003-56-9, 65997-17-3, 24968-12-5 and 9003-54-7Information provided by LG Chemical
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
LATI Latamid 68 H2-V0 PA6/PA66 copolymer, Heat Stabilized, Flame Retardant
PA6/PA66 copolymer (PA6/PA66) based compound. Heat stabilized. UL94 V-0 classified, halogens-based flame retardants and red phosphorous free. Good surface appearance.Availability: Africa & Middle Ea..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 1010F PEI (Europe-Africa-Middle East)
Transparent, enhanced flow Polyetherimide (Tg 217C). Resin is RoHS compliant. UL94 V0 and 5VA listing. US FDA and EU Food Contant compliant. Effective June, 2007 this grade will no longer be support..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM 1010M PEI (Europe-Africa-Middle East)
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. Resin is RoHS compliant.
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM ATX200F PEI (Europe-Africa-Middle East)
High flow Polyetherimide blend. Resin is RoHS compliant. UL94 V0 Listing. US FDA Food Contact compliant.
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
SABIC Innovative Plastics ULTEM ATX200R PEI Blend (Europe-Africa-Middle East)
High flow Polyetherimide blend with internal mold release. RoHS compliant. UL94 V0 Listing.
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
SABIC Innovative Plastics LNP THERMOCOMP YF006A Polyester Elastomer (Europe-Africa-Middle East)
LNP* THERMOCOMP* YF006A is a compound based on Polyester Elastomer containing Glass Fiber.
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
SABIC Innovative Plastics Noryl GTX GTX977 PPE+PA66 (Asia Pacific)
Noryl GTX GTX977 resin is a mineral reinforced conductive Noryl GTX with a improved CTE (7) with a balanced performance of Impact and stiffness. (developmental grade : EXNX0074)This data was supplie..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
SABIC Innovative Plastics Noryl GTX GTX977 PPE+PA66 (Europe-Africa-Middle East)
Noryl GTX GTX977 resin is a mineral reinforced conductive Noryl GTX with a improved CTE (7) with a balanced performance of Impact and stiffness. (developmental grade : EXNX0074)This data was supplie..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C

@Thickness 3.20 mm
383 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL GTX GTX678 PPE+PA
Noryl GTX678 resin is a high performance blend of PPE/PA that exhibits an excellent balance on non-halogenated flame retardance, conductivity, ductility, and high-heat resistance. This grade can be..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C

@Thickness 3.20 mm
383 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL GTX GTX678 PPE+PA (Europe-Africa-Middle East)
Noryl GTX678 resin is a high performance blend of PPE/PA that exhibits an excellent balance on non-halogenated flame retardance, conductivity, ductility, and high-heat resistance. This grade can be..
Deflection Temperature at 0.46 MPa (66 psi) >= 195 °C

@Thickness 3.20 mm
>= 383 °F

@Thickness 0.126 in
ISO 75
A. Schulman FORMION™ FI 226 40% Glass Fiber Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 226 is an injection molding grade, 40% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75-1/-2
Unitika A3130HR-25 PA6, 25% Mineral Reinforced, Dry
Information provided by Unitika Ltd.
Deflection Temperature at 0.46 MPa (66 psi) >= 195 °C

@Thickness 3.20 mm
>= 383 °F

@Thickness 0.126 in
ISO 75
A. Schulman FORMION™ FI 225 30% Glass Fiber Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 225 is an injection molding grade, 30% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75
Polyram RamLloy PZF301G4 PC/PBT Alloy, 20% Glass Fiber
20% Glass fiber reinforced, impact modified PC/PBT alloy for injection molding applications.Information provided by Polyram.
Deflection Temperature at 0.46 MPa (66 psi) >= 195 °C

@Thickness 3.20 mm
>= 383 °F

@Thickness 0.126 in
ISO 75
A. Schulman FORMION™ FI 226 40% Glass Fiber Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 226 is an injection molding grade, 40% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness..
Deflection Temperature at 0.46 MPa (66 psi) >= 195 °C

@Thickness 3.20 mm
>= 383 °F

@Thickness 0.126 in
ISO 75
A. Schulman FORMION™ FI 225 30% Glass Fiber Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 225 is an injection molding grade, 30% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness..
Deflection Temperature at 0.46 MPa (66 psi) >= 195 °C

@Thickness 3.20 mm
>= 383 °F

@Thickness 0.126 in
ISO 75
A. Schulman FORMION™ FI 226 40% Glass Fiber Reinforced Ionomer / Nylon Alloy
DescriptionFormion® FI 226 is an injection molding grade, 40% glass fiber reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75-1/-2
DSM Arnite® BM4 240 (PBT+PET)-MD20
20% Mineral Reinforced
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75-2
BASF Ultradur® S 4090 GM11 5/5% Glass/Mineral Filled PBT
Description: Is a PBT + ASA, injection-molding grades reinforced with 5% glass fiber/mineral, for laminar parts with high demands on dimensional stability and low warpage, e.g. lids, ventilation gri..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75
BASF Ultramid® 8260 40% Mineral Filled PA6 (Dry)
Ultramid 8260 is a 40% mineral reinforced PA6 injection molding compound. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75-2/B
Ascend Performance Materials Vydyne® 66J Nylon 66, General Purpose, high viscosity, DAM
Vydyne® 66J is a high-viscosity, heat-stabilized PA66 resin suitable for injection-molding and extrusion applications. It is available in natural color only. Vydyne 66J resin offers high strength, ..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
DAM; ISO 75-1/-2
DuPont Performance Polymers Zytel® 103FHS BKB009 Nylon 66  (Unverified Data**)
Unreinforced Heat Stabilized Polyamide 66 Zytel 103FHS BKB009 is a heat stabilized internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productiv..
Deflection Temperature at 0.46 MPa (66 psi) 195 °C
383 °F
ISO 75
Eurotec® Tecomid® NB40 NL FA50 PA6, unfilled, flame retardant - halogen free, natural
Information provided by Eurotec®
Copyright © lookpolymers.com All Rights Reserved