BASF Ultradur® S 4090 GM11 5/5% Glass/Mineral Filled PBT

Category	Polymer , Thermoplastic , ASA Polymer , Polyester, TP , Polybutylene Terephthalate (PBT) , PBT + ASA Blend, Glass Fiber Reinforced , Polybutylene Terephthalate (PBT), Mineral Filled
Manufacturer	BASF
Trade Name	Ultradur®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultradur® S 4090 GM11 5/5% Glass/Mineral Filled PBT.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Is a PBT + ASA, injection-molding grades reinforced with 5% glass fiber/mineral, for laminar parts with high demands on dimensional stability and low warpage, e.g. lids, ventilation grilles and housing covers.Information provided by BASF

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183
Water Absorption	0.40 %	0.40 %	Saturation; DIN 53495/1L
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C; 50% RH
Viscosity Measurement	139	139	[ml/g]; Viscosity number; ISO 1628
Linear Mold Shrinkage, Flow	0.010 cm/cm	0.010 in/in	Sheet
Linear Mold Shrinkage, Transverse	0.010 cm/cm	0.010 in/in	Sheet
Melt Flow	14.19 g/10 min @Load 2.16 kg, Temperature 275 °C	14.19 g/10 min @Load 4.76 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	63.0 MPa	9140 psi	50 mm/min; ISO 527-2
Elongation at Break	3.8 %	3.8 %	50mm/min; ISO 527-2
Modulus of Elasticity	4.00 GPa	580 ksi	ISO 527-2
Flexural Strength	104 MPa	15100 psi	ISO 178
Charpy Impact Unnotched	4.00 J/cm²	19.0 ft-lb/in²	ISO 179/1eU
Charpy Impact, Notched	0.450 J/cm²	2.14 ft-lb/in²	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Melting Point	220 - 225 °C	428 - 437 °F	DSC; ISO 11357-3
Maximum Service Temperature, Air	170 °C	338 °F
Deflection Temperature at 0.46 MPa (66 psi)	195 °C	383 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	105 °C	221 °F	ISO 75-2

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection-molding
Mold Temperature	60.0 - 100 °C	140 - 212 °F

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Europe
Primary Processing Technique	Injection Molding

Users viewing this material also viewed the following: