Polymer Property : Tensile Strength, Ultimate = 7540 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ISO 527
Premix Thermoplastics PRE-ELEC® PP 1378 PRE-ELEC PP 1378 is a conductive thermoplastic compound based on glass-fiber reinforced polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electri..
Tensile Strength, Ultimate	52.0 MPa @Temperature 60.0 °C	7540 psi @Temperature 140 °F	ISO 527
LATI LARIL 13-V1KC Mineral Filled Polyphenylene Oxide (PPOm) (UL94V-1) (Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most ..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Kleerdex Kydex® P90 Acrylic/PVC Extrusion Compound (discontinued **) Low heat release aviation gradeApplications: Kydex P90 is designed for extrusion of profiles which need to meet the highest flammability requirement of PAR 25.853a for vertical burn, rate of heat re..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 308 Black (COM) Mineral/Flock Filled Phenolic Molding Compound (discontinued **) Plaslok 308 is a two-stage, mineral and flock-filled phenolic molding compound designed to withstand the hostile environment of high abrasion and high tangential speed of engine pulleys. It is char..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 309 Black (COM) Mineral/Fiber Filled Phenolic Molding Compound (discontinued **) Plaslok 309 is a two-stage, mineral and fiber-filled phenolic molding compound having excellent impact strength; and as such, is considered a good candidate for replacing chopped-fiber filled compou..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
PolyOne Lubri-Tech™ NL-000/15T Nylon 612 - 15% PTFE Lubricated (discontinued **) Properties Dry as MoldedData provided by M. A. Hanna. M. A. Hanna and Geon merged to form PolyOne in 2000.
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plaslok 308 Black (COM) Mineral/Flock Filled Phenolic Molding Compound (discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use. Plaslok 308 is a two-stage, mineral and flock..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Ineos Styrenics Polystyrene 168M (NAFTA) High heat, high molecular weight general purpose polystyrene with low crystal clarity. It offers high stiffness for extrusion/thermoforming applications, especially for the food packaging.Informati..
Tensile Strength, Ultimate	52.0 MPa @Temperature 23.0 Â°C	7540 psi @Temperature 73.4 Â°F	ASTM D638
IRPC Polimaxx Porene GA800 Acrylonitrile Butadiene Styrene Applications:injection moldinghousing of electrical appliances such as electric fans, telephones, calculators and toys
Tensile Strength, Ultimate	52.0 MPa	7540 psi
Ineos Styrenics Polystyrene 168M0 (NAFTA) High heat, high molecular weight general purpose polystyrene with low residual volatiles. It is ideally suited for use in critical low taste, low odor food packaging products.Information provided b..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 2308 Phenolic, Granular, Compression Molded PLENCO 02308 is a general purpose organic filled phenolic molding compound, offering improved heat resistance and optimized cure properties. UL recognized under component file E40654. 02308 is avai..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 4414 Phenolic, Granular, Transfer Molded PLENCO 04414 is a flock and mineral filled phenolic molding compound. It is formulated for use in electrical applications that require improved heat resistance, mechanical strength, and dimensional ..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 6527 Phenolic, Granular, Transfer Molded PLENCO 06527 is a woodflour and mineral filled resole phenolic molding compound.Information supplied by Plenco.
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 7500 Phenolic, Granular, Transfer Molded PLENCO 07500 is an organic reinforced phenolic molding compound, offering improved mechanical strength and excellent cosmetic characteristics. Type ASTM 5948 CFG and UL recognized under component fi..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ISO 527-1, 2
Polyplastics Duranex® 209A Polybutylene Terephthalate (PBT), Low friction, Low wear DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers ..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ISO 37
Lubrizol ESTANE® GP95AB Ester Based Thermoplastic Polyurethane Type: Estane® GP 95AB is an aromatic polyester-based thermoplastic polyurethane (TPU).Appearance: Translucent spherical pelletsUses: Injection molding parts, animal identification tagsAvailable in ..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plenco 4504 Phenolic, Granular, Injection Molded Plenco 04504 is a renumber of Plaslok 504. Plenco 04504 is a two-stage, mineral and cellulose-filled phenolic molding compound having better impact and heat resistance than general purpose molding c..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	DIN 53504
Lubrizol ESTANE® 58563 Ester Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability ..
Tensile Strength, Ultimate	52.0 MPa	7540 psi
BASF Polystyrol® 165 H Polystyrene (Europe) High molecular grades, often blended with high-impact extrusion grades (e.g. for dairy products).Data was collected by ISO methods and provided by BASF.
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
A. Schulman ComAlloy Comtuf® 410 Polycarbonate/Polyester Alloy Data provided by the manufacturer, ComAlloy International Company. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been integrated into the A Sc..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	5 mm/min
Arkema Group Orgalloy® R 60T30 Nylon 6 Alloy, Mineral Filled (Conditioned) Rigid polyamide 6 alloy: easy to process, low moisture absorption, chemical resistance (no known solvents).Mineral filled. Low distortion, offers precisely dimensioned injection moldings.ISO data pr..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
A. Schulman ComAlloy Lubrilon® 640 Nylon 6/12, PTFE Reinforced, Flow Enhanced Data provided by the manufacturer, ComAlloy International Company. High performance and excellent lubricity with minimal surface wear.The ComAlloy product line has been integrated into the A Schulma..
Tensile Strength, Ultimate	52.0 MPa @Thickness 2.00 mm	7540 psi @Thickness 0.0787 in	molded plaque, cured 20 hr at 100°C; ASTM D412
BASF Elastollan® 1185A10V Wire & Cable Grade Polyurethane Elastomer Compliant with NSF Standard 61 (Drinking water contact). As with all TPU products this grade must be dried prior to processing.Information provided by BASF Corporation.
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ISO 527-1, 2
Polyplastics Duracon® NW-02 Acetal Co-polymer (POM), High sliding, Special lubricant, High sliding DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Plaslok 304 Black Impact Grade Woodflour/Cellulose Filled Phenolic Molding Compound (discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 304 is a two-stage, woodflour and cel..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Sumitomo Bakelite North America RX® 1-501AN Mineral Filled Diallyl Phthalate Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Information provided by Sumitomo Bak North Americ..
Tensile Strength, Ultimate	52.0 - 125 MPa @Temperature 0.000 - 160 °C	7540 - 18100 psi @Temperature 32.0 - 320 °F	Average value: 78.5 MPa Grade Count:2
Overview of materials for Polysulfone, 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Polysulfone, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are inc..
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ISO 527
Lubrizol Estane® GP 52 DT Thermoplastic Polyurethane Type: Estane® GP 52DT is an aromatic polyester-based thermoplastic polyurethane (TPU).Features: Translucent spherical pellets.Uses: Injection molding parts, animal identification tagsAvailable in E..