Sumitomo Bakelite North America RX® 1-501AN Mineral Filled Diallyl Phthalate

Category	Polymer , Thermoset , Diallyl Phthalate (DAP) , Diallyl Phthalate (DAP), Cast, Mineral Filler , Filled/Reinforced Thermoset
Manufacturer	Sumitomo Bakelite North America
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Sumitomo Bakelite North America RX® 1-501AN Mineral Filled Diallyl Phthalate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ortho Resin Isomer (DAP). Used for critical, high-performance military and commercial electrical components where long-term reliability is demanded.Information provided by Sumitomo Bak North America, Inc.

Physical Properties	Metric	English	Comments
Density	1.73 g/cc	0.0625 lb/in³	ASTM D792
Apparent Bulk Density	0.670 g/cc	0.0242 lb/in³
Water Absorption	0.40 %	0.40 %	48 hours, 50°C. ASTM D570
Linear Mold Shrinkage	0.0070 - 0.010 cm/cm	0.0070 - 0.010 in/in	Compression Molding. ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	52.0 MPa	7540 psi	ASTM D638
Flexural Yield Strength	103 MPa	14900 psi	ASTM D790
Flexural Modulus	9.00 GPa	1310 ksi	ASTM D790
Compressive Yield Strength	152 MPa	22000 psi	ASTM D695
Izod Impact, Notched	0.240 J/cm	0.450 ft-lb/in	ASTM D256A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	34.0 µm/m-°C @Temperature 20.0 °C	18.9 µin/in-°F @Temperature 68.0 °F	ASTM D696
Deflection Temperature at 1.8 MPa (264 psi)	149 °C	300 °F	ASTM D648A
Oxygen Index	24 %	24 %	ASTM D2863

Electrical Properties	Metric	English	Comments
Dielectric Constant	3.7 @Frequency 1e+6 Hz	3.7 @Frequency 1e+6 Hz	Wet
	4.3 @Frequency 1000 Hz	4.3 @Frequency 1000 Hz	Wet
Dielectric Strength	15.0 kV/mm	381 kV/in	Wet, step-by-step. ASTM D149
	16.0 kV/mm	406 kV/in	Wet, short term. ASTM D149
Dissipation Factor	0.015 @Frequency 1000 Hz	0.015 @Frequency 1000 Hz	Wet; ASTM D150
	0.019 @Frequency 1e+6 Hz	0.019 @Frequency 1e+6 Hz	Wet; ASTM D150
Arc Resistance	135 sec	135 sec	ASTM D495

Processing Properties	Metric	English	Comments
Processing Temperature	160 - 180 °C	320 - 356 °F	Mold temperature

Users viewing this material also viewed the following: