Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | >= 34.0 MPa | >= 4930 psi | ASTM D638 |
NIZHNEKAMSKNEFTEKHIM PP 1500J (T30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Ineos Nova 3900 General Purpose Crystal Polystyrene
(discontinued **) High flow, Good compoundingApplications: Color concentrates, Compounding, Thin wall moldingsExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the physical and o.. |
|||
Tensile Strength, Yield | >= 34.0 MPa | >= 4930 psi | ASTM D638 |
NIZHNEKAMSKNEFTEKHIM PP 1500M (X30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P.. |
|||
Tensile Strength, Yield | 34.0 - 70.0 MPa | 4930 - 10200 psi | Average value: 53.9 MPa Grade Count:117 |
Overview of materials for Polycarbonate/PET Polyester Blend This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/PET Polyester Blend". Each property range of values reported is minimum and maximum values.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 50mm/min; ASTM D638 |
Reliance Industries Repol H080EG Polypropylene REPOL Polypropylene H080EG is manufactured using Unipol PP process which combines the production efficiency of gas phase fluidized bed reactor technology with the high activity stereospecific cataly.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 50 mm/min |
Eastman Tenite 383A-10 Cellulose Acetate Propionate
(discontinued **) 10% Plasticized. ISO data as provided by the manufacturer, Eastman Chemical. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 2.0 in/min; ASTM D-638 |
Chevron Phillips K-Resin® KR01BR SBC
(discontinued **) K-Resin® Styrene-Butadiene Copolymer (SBC)Applications:Molded boxes with integral hingesMedical devicesDisplaysToysMedia packagingFeatures:Good stiffnessGood toughnessGood warpage resistanceExcelle.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Flint Hills P4C5T-013 Homopolymer Polypropylene Homopolymer, UL certified, and FDA compliant.Features: Antistat, and controlled rheology.Applications: Injection molding: general purpose.Former Huntsman polypropylene products are now produced by F.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Noryl RF1132 PPE+PP PPE+PP blend for high frequency applications. Good heat resistance and low DK.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength, Yield | 34.0 - 40.0 MPa @Thickness 2.00 mm |
4930 - 5800 psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF) Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Features: Copolymer; High ViscosityUses: PipingAdditional Properties: Crystallization Heat - ASTM .. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP STAT-LOY 63000CTC PC+POLYESTER (Asia Pacific) A permanent antistatic PC-Alloy compound that features transparency and superior cleanliness for advanced semiconductor packaging applications |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Thermocomp FF008L PE LNP* Thermocomp* FF008L is a compounding based on Polyethylene containing glass fiber. Added characteristics include Low Extractible.This data was supplied by SABIC-IP for the Americas region. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL PPX PPX7112 PPE+PP (Asia Pacific) PPE+PP blend. Suitable for painted exterior automotive applications. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PPX PPX7200 PPE+PP+PS PP+PPE+PS. Improved chemical resistance and surface aesthetics in injection molded applications. NSF61-capable. UL-94 HB listed. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | 50mm/min; ISO 527-2 |
Borealis BH980MO Polypropylene Copolymer BH980MO is a heterophasic copolymer. This grade provides very high stiffness, high gloss and low stress whitening. and is designed for high-speed injection molding and contains nucleating and antist.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 1310 Coupled Mica Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1310 is a Coupled Mica filled homopolymer polypropylene compound for injection molding.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP1666 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1666 is a 10% talc filled homopolymer polypropylene compound. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
A. Schulman POLYFLAM™ FPP 1007E Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1007E is a 40% talc filled homopolymer compound for extrusion applications.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP1666 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1666 is a 10% talc filled homopolymer polypropylene compound. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ISO 527-2 |
Total PPH 11012 Polypropylene Homopolymer, Injection Molding Polypropylene PPH 11012 is a nucleated controlled-rheology antistatic homopolymer with a high melt flow index of 55 g/10 min.Polypropylene PPH 11012 is characterized by high fluidity for high speed .. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
A. Schulman POLYFLAM™ FPP 1007F Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1007F is a 40% talc filled homopolymer polypropylene compound that utilizes FDA compliant raw materials.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® R 47 HW 10 PA6 Grilon R 47 HW 10 is a flexible, cold impact resistant and heat stabilized polyamide 6 for applications in the extrusion. The material can be processed on all for polyamides suitable tube-extrusion .. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Dow 5E89 Polypropylene Homopolymer Resin OverviewConsistent processabilityGood color stabilityHigh strength propertiesLow water "carry-over"High speed processingComplies with U.S. FDA 21 CFR 177.1520 (c)1.1aDOW 5E89 Polypropylene Resin is .. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Arkema Group Pebax® 7233 Polyether Block Amide (PEBA) Information provided by Arkema Group |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334W20L1 Wollastonite Reinforced |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336W20L1 Wollastonite Reinforced |
|||
Tensile Strength, Yield | 34.0 - 55.0 MPa | 4930 - 7980 psi | ASTM D638 |
Arkema Group KYNAR® 370 Polyvinylidene Fluoride (PVDF) Homopolymer - Injection Molding Characteristics: Natural resin - translucent, off-white hemispheres. Low melt shrinkage, graphite powder filled. High stability in harsh thermal, chemical and ultraviolet environments. High toug.. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0339T20L Talc Reinforced |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | |
UBE A (High-Cis) HIPS (n-DM = 0.03 wt % and PH-3H = 0.03 wt %) Description: UBE high impact polystyrene (HIPS).Information provided by UBE. |
|||
Tensile Strength, Yield | 34.0 MPa | 4930 psi | ISO 527 |
Unipetrol PP MONSTEN® GB 218 Polypropylene Homopolymer Applications include injection molding and fibers. Anti Gasfading stabilization. Homopolymer.Information provided by Unipetrol RPA |