Polymer Property : Tensile Strength, Yield = 4930 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	34.0 MPa	4930 psi	4.0 mm thick, 10.0 mm wide molded rod; ISO 527
Premix Thermoplastics PRE-ELEC® ESD 7120 PRE-ELEC ESD 7120 is a static dissipative thermoplastic compound based on ABS. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 7120 has been developed for inject..
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Ineos ABS Lustran® 743 General Purpose, High-Impact (discontinued **) Information provided by Bayer Corporation, Plastics DivisionLANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La..
Tensile Strength, Yield	>= 34.0 MPa	>= 4930 psi	ASTM D638
NIZHNEKAMSKNEFTEKHIM PP 1500M (X30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P..
Tensile Strength, Yield	34.0 - 70.0 MPa	4930 - 10200 psi	Average value: 53.9 MPa Grade Count:117
Overview of materials for Polycarbonate/PET Polyester Blend This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/PET Polyester Blend". Each property range of values reported is minimum and maximum values..
Tensile Strength, Yield	34.0 - 190 MPa	4930 - 27600 psi	Average value: 122 MPa Grade Count:16
Overview of materials for Nylon 612, Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Glass Fiber Filler". Each property range of values reported is minimum and maximum values of ..
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D882
Honeywell Capran® 980 Heat Stabilized Nylon Film (discontinued **) Description: Capran® 980 is a clear (low haze level), heat-stabilized cast film produced from modified nylon 6 resin. Capran® 980 has excellent heat stability and resistance to pinholing. It ca..
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
LyondellBasell Pro-fax 6301 Polypropylene Homopolymer, Flake Resin Primary Processing Method: Masterbatch/ConcentratesKey Features: general purpose polypropylene homopolymer flake resin, minimal stabilization, FDA acceptableApplications: compounding, concentrates, ..
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Global PP-1100-PK Polypropylene Homopolymer Description-transparency, high stiffness, high heat resistantApplications-general purpose, household goodsInformation provided by Global Polymers Corporation.
Tensile Strength, Yield	34.0 MPa	4930 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP Lubricomp ZP003 PPE+PS (Europe-Africa-Middle East) LNP* LUBRICOMP* ZP003 is a compound based on PPE + PS Blend resin containing PTFE, Silicone. Added features include Internally Lubricated.This data was supplied by SABIC-IP for the Europe-Africa-Mid..
Tensile Strength, Yield	34.0 MPa	4930 psi	50mm/min; ISO 527
Styrolution TerblendÂ® N NM-19 ABS/PA6 (Conditioned) Terblend N NM-19 is a UV stabilized ABS/PA6 blend combining very high impact strength, even at low temperatures with an excellent processability and surface appearance.Information provided by STYROL..
Tensile Strength, Yield	34.0 MPa	4930 psi	ISO 527-1/-2
Styrolution TerblendÂ® N NM-19 XP Beige 38163 ABS+PA (Conditioned) Description: TerblendÂ® N NM-19 XP is an UV stabilized ABS/PA blend combining very high impact strength, even at low temperatures with an outstanding processability and excellent surface appearanc..
Tensile Strength, Yield	34.0 MPa	4930 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL PPX PPX7112 PPE+PP (Asia Pacific) PPE+PP blend. Suitable for painted exterior automotive applications.
Tensile Strength, Yield	34.0 MPa	4930 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL PPX PPX7200 PPE+PP+PS (Asia Pacific) PP+PPE+PS. Improved chemical resistance and surface aesthetics in injection molded applications. NSF61-capable. UL-94 HB listed.
Tensile Strength, Yield	34.0 MPa	4930 psi	50mm/min; ISO 527-2
Borealis HG313MO Polypropylene HG313MO is a polypropylene homopolymer intended for injection molding. Its high melt flow makes it especially suitable for products with long flow length. This grad is designed for high-speed inject..
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
A. Schulman POLYFLAM™ FPP 1007F Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1007F is a 40% talc filled homopolymer polypropylene compound that utilizes FDA compliant raw materials.Information provided by A. Schulman.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
A. Schulman POLYFLAM™ FPP 1007F Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1007F is a 40% talc filled homopolymer polypropylene compound that utilizes FDA compliant raw materials.Information provided by A. Schulman.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM-D638
Polyram PlusTek RD120 Nylon 12, Injection Molding Polyamide 12 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
A. Schulman POLYFORT™ FPP 1310 Coupled Mica Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1310 is a Coupled Mica filled homopolymer polypropylene compound for injection molding.Information provided by A. Schulman.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Tipco Tipcolene® PP-LTHA - Unfilled Polypropylene Homopolymer with Long Term Heat Aging Stability PP Homopolymer with Long Term Heat Aging StabilityApplications: Electrical & AppliancesProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd., India.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Entec Hypro™ PP-HP35NS Homopolymer, 35 Melt Flow This product is intended for thin-wall injection molding applications as well as low denier filament yarns, extrusion coating and specialty cast embossed film.Information provided by Entec
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Entec Hypro™ PP-HP20 Homopolymer, 20 Melt Flow This product can be used for general purpose injection molding as well as fiber spinning and other critical extrusion applicationsInformation provided by Entec
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Arkema Group Pebax® 7233 Polyether Block Amide (PEBA) Information provided by Arkema Group
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0334G5M25CL Glass/Mineral Reinforced Coupled
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0336M10L Mica Reinforced
Tensile Strength, Yield	34.0 MPa	4930 psi
BASF Polystyrol® 456 F Impact Grade Polystyrene (Europe) Heat distortion resistant, good flowing grade for parts subjected to heat.Data was collected by ISO methods and provided by BASF.
Tensile Strength, Yield	34.0 MPa	4930 psi	50mm/min; ISO 527
BASF Ultramid® 8254 HS BK-102 PA6 (Dry) Ultramid 8254 HS is a highly flexible, heat stabilized, impact modified nylon 6 extrusion grade for tubing applications.
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D638
Aclo Accutech Polypropylene Homopolymer HP0339T20L Talc Reinforced
Tensile Strength, Yield	34.0 MPa	4930 psi	ASTM D-638
Bapolene® 4012F Polypropylene, Compounding/Extrusion Grade Bapolene PP4012F is a homopolymer polypropylene (flake) that meets US FDA 21CFR177.1520.Applications: Compounding, and filled or color concentrate applications.Bapolene® and Bapolan® are registere..
Tensile Strength, Yield	34.0 - 52.0 MPa	4930 - 7540 psi	ASTM D638
Arkema Group KYNAR® 460 Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion Characteristics: Broad molecular weight distribution, pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, ..
Tensile Strength, Yield	34.0 MPa	4930 psi	ISO 527
SABIC Innovative Plastics LNP STAT-KON MFD03 PP (Asia Pacific) LNP* Stat-kon* MFD03 is a compound based on Polypropylene resin containing Glass Fiber, Carbon Powder. Added features of this material include: Electrically Conductive.