Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | <= 22.0 MPa | <= 3190 psi | ISO/R527 |
Polykemi AB POLYfill PP EIP5025 F VT2 Polypropylene, Mineral Reinforced, Extrusion grade, Low CLTE Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 22.0 MPa | <= 3190 psi | ISO/R527 |
Polykemi AB POLYfill PPC GK8020 Polypropylene Copolymer, Glass Fiber Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 22.0 MPa | <= 3190 psi | ISO/R527 |
Polykemi AB POLYfill PPC TS8030 Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 22.0 MPa | <= 3190 psi | ISO/R527 |
Polykemi AB POLYfill PPHC K2040H Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 50 mm/min test speed; ASTM D 638 |
NOVA Chemicals Sclair® IG454-A Compression Molded HDPE Resin IG454-A complies with the U.S. FDA specifications for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food. IG454.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ASTM D638 |
SABIC Innovative Plastics LNP KONDUIT MT00E PP (Asia Pacific) LNP KONDUIT* MT00E is a compound based on Polypropylene resin containing Proprietary Thermal Filler. Added features of this material include: Thermally Conductive. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO 527 |
FKuR Kunststoff Bio-Flex® A 4100 CL Compostable PLA Blend The BIO-FLEX® trade name indicates blends of co-polyester and PLA* with, depending on the particular grade, a very high content of natural resource material. BIO-FLEX® does not contain any sta.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO 527 |
FKuR Kunststoff Fibrolon® P 7550 Wood-Plastic Compound, Fiber Reinforced FIBROLON® are fiber reinforced compounds. Fibrolon® P 7550 has a polypropylene base. With the brand name of FIBROLON® FKuR has developed natural fiber reinforced compounds (Wood-Plastics-C.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | |
JPJ Technologies 6380M HDPE Extrusion Information provided by JPJ Technologies |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO 37 |
Huntsman AVALON® 70 AE Thermoplastic Polyurethane Introduction: AVALON 70 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 70 AE is part of the AVALON Soft Range and offers a premium soiling material .. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | |
LATI Laticonther 52/35 CP1/45 PP Homopolymer High thermal conductivity product based on Polypropylene homopolymer (PPh). Special filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCA901 PPE-TPE (Asia Pacific) Non-Halogenated flame retardant, flexible Noryl resin intended for evaluation in wire and cable applications, capable of meeting VW-1 and 105°C end use temperature requirements as defined by UL.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCA901 PPE-TPE (Europe-Africa-Middle East) Non-Halogenated flame retardant, flexible Noryl resin intended for evaluation in wire and cable applications, capable of meeting VW-1 and 105°C end use temperature requirements as defined by UL.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP YL003C Polyester Elastomer LUBRICOMP* YL003C is a compound based on Polyester Elastomer resin containing 15% PTFE. Added features of this grade include: Clean Compound System, Wear Resistant. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP 2Z004 ETFE LNP* THERMOCOMP* 2Z004 is a compound based on ETFE resin containing 20% Milled Glass. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO 527 |
SABIC Innovative Plastics LNP Thermocomp TH0450D PUR (Asia Pacific) LNP* Thermocomp* TH0450D is a compound based on Polyurethane resin containing High Specific Gravity Filler. Added features of this material include: High Specific Gravity.This data was supplied by .. |
|||
Tensile Strength at Break | 22.0 MPa @Temperature 23.0 °C |
3190 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
SYNTHOS Krasten® 662E High Impact Polystyrene High impact grade with properties suitable for thermoforming. Processed mainly by extrusion and thermoforming. Production of demanding visual appearance plates, technical parts, sheets and molded pa.. |
|||
Tensile Strength at Break | 22.0 MPa @Temperature 23.0 °C |
3190 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
SYNTHOS Krasten® FB28 High Impact Polystyrene And Polyethylene Blend Polymer blend HIPS/PE. High toughness, very good tensile properties and environmental stress cracking resistance. Processed mainly by extrusion and thermoforming. Production of sheets and films, tec.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics Valox® V3004 PBT (Asia Pacific) Unfilled PBT modified with elastomer. Targeted for flexible hinge, automotive connectors, film applications. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 25mm/min; ISO 527 |
Borealis LE0592 Polyethylene LE0592 is a crosslinkable black polyethylene compound, specially designed for bonded semi conductive screen applications. Applications: LE0592 is intended for semi conductive applications in XLPE m.. |
|||
Tensile Strength at Break | >= 22.0 MPa | >= 3190 psi | 25mm/min; ISO 527 |
Borealis Supersmooth™ LE0592S Polyethylene Supersmooth™ LE0592S is a crosslinkable black polyethylene compound, specially designed for bonded semiconductive screen applications. Supersmooth™ LE0592S is intended for semiconductive applicat.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ASTM D 638 |
Cossa Polimeri ESTASTIR HI 10 V0 Flame Retardant Polystyrene Flame retardant class V0, with PBDE, for injection molding or extrusionInformation provided by Cossa Polimeri S.r.l. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO 527-1/-2 |
Covestro Desmopan® DP 1960AW Polyurethane As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | |
Daikin DAI-EL G-801 Fluoroelastomer Copolymer, Peroxide Curable Grade, 66% Fluorine Content Offers excellent chemical and steam resistance. Offers good mechanical characteristics.Features: Good low-temperature and elasticity characteristics.Information provided by Daikin Industries. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 50 mm/min; ISO 527 |
Chi Mei Polyrex® PH-88 Polystyrene - High Impact High impact |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ASTM D638 |
Eastman Eastar GN077 Copolyester, Natural Eastar Copolyester GN077 is an amorphous resin with good melt strength, chemical resistance, high clarity and gloss. It is an excellent choice for extrusion blow molding small to intermediate size c.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | Post cure 2 hours @ 180°C |
3M Dyneon™ FPO 3741 Fluoroelastomer Information provided by the Dyneon division of 3M. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | Film Property, 50 µm thickness; ASTM D882 |
Arkema Group OREVAC® 9309 EVA Terpolymer OREVAC® is a range of ethylene-vinyl acetate copolymers modified by adjunction of polar groups which, when molten, have excellent adhesive properties to various substrates. They are supplied as fre.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | 50mm/min; ASTM D638 |
3M Dyneon™ PVDF 31508/0009 Polyvinylidene Fluoride 3M™ Dyneon™ PVDF 31508/0009 is a flexible copolymer of VF2 and CTFE, exhibiting very low shrinkage and excellent impact resistance. Dyneon PVDF 31508/0009 also has a very low brittleness temperatu.. |
|||
Tensile Strength at Break | 22.0 MPa | 3190 psi | ISO R 527 |
Addiplast Addilene H 552 Y7 Polypropylene Homopolymer Good surface appearance, high temperature resistanceInformation provided by Addiplast. |