Polymer Property : Ball Indentation Hardness = 170 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	170 MPa	24700 psi	ISO2039.1 DIN.53456
Omnia Plastica Akulon® PA 66 - Akulon 66 - Dry Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely..
Ball Indentation Hardness	170 MPa	24700 psi	ISO2039.1 DIN.53456
Omnia Plastica Akulon® PA 66.6 Akulon GX - Dry Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool..
Ball Indentation Hardness	170 MPa	24700 psi	ISO2039.1 DIN.53456
Omnia Plastica Omniamid PA6 GHR HR - Dry Cast nylon 6 produced with the addition of graphite and a special lubricator which gives to this product better properties than natural PA6G. Whilst retaining the general features of OMNIAMID G it i..
Ball Indentation Hardness	170 MPa	24700 psi	ISO2039.1 DIN.53456
Omnia Plastica PEI Polyetherimide This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline polymer...
Ball Indentation Hardness	170 MPa	24700 psi	ISO2039.1 DIN.53456
Omnia Plastica Rilsan® PA6 GF - Akulon GF - at 50% RH Polyamide 6 reinforced with the addition of 30% glass fibre and graphite. The glass charge makes the material highly resistant to abrasion, compression and flexing. Akulon GF is particularly suitabl..
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit FRIANYL A63 H-SG50 Nylon 6.6 for injection molding, 50% mineral filled Nylon 6.6 for injection molding, heat stabilized (dark natural color).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit FRIANYL A63 W-GV15 Nylon 6.6 for injection molding, 15% glass fiber reinforced Nylon 6.6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit FRIANYL B63 W-KF30 Nylon 6 for injection molding, 30% short glass fiber reinforced Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Quadrant EPP Ertalyte® PET, cast (ISO Data) The specific properties of this virgin crystalline PET make it especially suitable for the manufacture of mechanical precision parts which have to sustain high loads and/or are subject to wear.
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit FRIANYL A63 KV25 Nylon 6.6 for injection molding, 25% glass ball reinforced Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit FRIANYL C73 GV30 Nylon 6.6/6 for injection molding, 30% glass fiber reinforced Nylon 6.6/6 for injection molding, medium viscosity.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Nilit RECONYL A KV30 Recycled nylon 6.6 for injection molding, 30% glass ball reinforced Recycled nylon 6.6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics
Ball Indentation Hardness	170 - 190 MPa	24700 - 27600 psi	Average value: 179 MPa Grade Count:21
Overview of materials for Acrylic, General Purpose, Molded This property data is a summary of similar materials in the MatWeb database for the category "Acrylic, General Purpose, Molded". Each property range of values reported is minimum and maximum values ..
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1
Lucite International DiakonÂ® CLG340 Acrylic Polymer Information provided by Lucite International
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1 (H 961-30)
Lucite International DiakonÂ® Frost 952 80 Acrylic Polymer Information provided by Lucite International
Ball Indentation Hardness	170 MPa	24700 psi	Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMIGAMIDÂ® 200 Polyamide 66, Dry Application: bearing bushes, machine parts, gears, linersInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness	170 MPa	24700 psi	Hc 30; ISO 2039; partially
Schwartz Technical Plastics LAMINEXÂ® 2040 Cotton Fabric, Phenolic Resin Impregnated, MoS2 Filled Application: slippers, gear-rods, bushesInformation provided by Schwartz Technical Plastics GmbH
Ball Indentation Hardness	170 MPa @Load 36.5 kg, Time 30.0 sec	24700 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Styrolution LuranÂ® S KR 2858 GS Colored 15% Glass Filled ASA Description: Glass-reinforced grade with high stiffness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® 1SBVX-30H LDS black PA1010-GF30 Product Description: Grilamid 1SBVX-30H LDS black is a 30% glass fiber reinforced Polyamide 1010 injection molding grade. This grade is specifically optimized for the laser Direct Structuring techno..
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® B 70 GFE 30 H PA6-GF30 Product description: Grilon B 70 GFE 30 H is a heat stabilized and impact modified PA 6 injection molding grade with 30% glass fiber reinforcement. Grilon B 70 GFE 30 H has the following important p..
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® BG-15 PA6-GF15 Product description: Grilon BG-15 is a heat stabilized PA 6 injection molding grade with 15% glass fiber reinforcement. Grilon BG-15 has the following important properties: Good surface finishGood b..
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® BG-15/2 PA6-GF15 Product description: Grilon BG-15/2 is a heat stabilized PA6 injection molding grade with 15% glass fibers. Grilon BG-15/2 has the following important properties: Good surface finishEasy processingG..
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® BG-30 EC PA6-GF30 Information provided by EMS Grivory
Ball Indentation Hardness	170 MPa	24700 psi	conditioned; ISO 2039-1
EMS-Grivory Grivory® BGZ-50/2 PA6-I-GF50 Information provided by EMS Grivory
Ball Indentation Hardness	170 - 200 MPa @Time 30.0 sec	24700 - 29000 psi @Time 0.00833 hour	DIN 53 456
Hippe PA 46 Nylon 46 PA 46 is primarily used in higher temperature ranges where stiffness, creep resistance, continuous heat stability and fatigue strength are required. Therefore PA 46 is suitable for high quality app..
Ball Indentation Hardness	170 MPa	24700 psi	dry; ISO 2039-1
EMS-Grivory Grivory® BGZ-30 PA6-GF30 Product description: Grilon BGZ-30 is a normal viscosity, heat stabilized and impact modified PA 6 injection molding type with 30% glass fibers. Grilon BGZ-30 has the following important properties:..
Ball Indentation Hardness	170 MPa	24700 psi	value at 30 sec.; ISO 2039-1
CENTROPLAST CENTROLYTE FG Polyethylene terephthalate, Food Grade This material is electrically insulating, with good chemical resistance, high mechanical strength and wear resistance.Information provided by CENTROPLAST Engineering Plastics GMBH
Ball Indentation Hardness	170 MPa	24700 psi	value at 30 sec.; ISO 2039-1
CENTROPLAST CENTRO HPM Polyetherimide This material has high strength and rigidity at high temperatures, with good electrical properties. Applications include electrical insulators, and load-bearing components.Information provided by C..
Ball Indentation Hardness	170 MPa	24700 psi	ISO 2039-1 (H 961-30)
Lucite International Diakon® Frost 902 80 Acrylic Polymer Information provided by Lucite International