Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | <= 50.0 MPa | <= 7250 psi | ISO 178 |
Polykemi AB POLYfill PPH GK8040 Polypropylene Homopolymer, Glass Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Nilit FRIANYL A63 TF30 Nylon 6.6 for injection molding, 30% PTFE lubricated Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | <= 50.0 MPa | <= 7250 psi | ISO 178 |
Polykemi AB SCANLON A 5005B UV PA/ABS-Blend Information provided by Polykemi AB |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Transverse |
Quadrant Plastic Composites MultiQ® Impact Thermoplastic Panel Composite MultiQ is a product line of thermoplastic composites in panel form whose specific properties make them particularly suitable as an environmental alternative to plywood in outdoor applications. Howev.. |
|||
Flexural Strength | 50.0 - 60.0 MPa | 7250 - 8700 psi | ISO 178 |
Raschig Group EN 5004 Epoxy Molding Compound Mica reinforced molding compound. Low mold shrinkage and post-shrinkage, very good electrical values, outstanding heat resistance, very goo pourablity. This product meets the allowed upper limits fo.. |
|||
Flexural Strength | 50.0 MPa @Temperature 121 °C |
7250 psi @Temperature 250 °F |
ASTM D790 |
Penn Fibre Pennite® 4512 Nylon 6, 12% Glass Fiber Reinforced (PA6) PENNITE® 4512 is a 12% glass fiber reinforced, black pigmented, thermally modified, type 6 nylon, available in sheets and rolls for high performance thermoforming and fabrication applications. PENN.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Nilit FRIANYL B63 H Nylon 6 for injection molding Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 50.0 MPa | 7250 psi | 1.3 mm/min, 50 mm span; ASTM D 790 |
SABIC Innovative Plastics LNP Stat-loy AX06484X ABS LNP* Stat-Loy* AX06484 is a compound based on ABS resin containing mineral filler. Characteristics of this grade is it is extrudeable and static dissipative.This data was supplied by SABIC-IP for t.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Bending Strength |
Saint-Gobain Spectrosil® 1000 Optical Fused Quartz Spectrosil® 1000 grade is used for non-transmissive mirrors and substrates, and other high purity components which do not require specified optical transmission.Spectrosil® is a synthetic fuse.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Bending Strength |
Saint-Gobain Spectrosil® 2100 Optical Fused Quartz Spectrosil® 2100 has improved refractive index homogeneity.Spectrosil® is a synthetic fused silica manufactured using a patented, environmentally friendly process that results in a virtually c.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Bending Strength |
Saint-Gobain Vitreosil® 055 Optical Fused Quartz Vitreosil® 055 is the highest grade of optical grade fused quartz available from Saint-Gobain Quartz for use in the near UV and visible. It has a useful transmission range from 270 nm in the nea.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | |
Sapco C 410 Steatite Information provided by Sapco. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Bending Strength |
Saint-Gobain Puropsil® B Infrared Grade Low [OH] Optical Fused Quartz Puropsil® B optical infrared fused quartz is manufactured from naturally occurring quartz crystal using a plasma process to ensure a low OH. It has excellent IR transmission with a useful IR tra.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Polyram RamOfin PPH313V4 Polypropylene, 20% Mineral Filled 20% mineral filled, impact modified polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178-93 |
Wellman Wellamid® XT1627-BK2 High Impact Nylon 66 Description: High Impact Nylon 66Information provided by Wellman. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | GB/9341 |
Zhejiang Juner JEPPA003 High Glossy PP Applications: High Glossy PartsInformation provided by Zhejiang Juner New Materials Co, Ltd. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
A. Schulman POLYFLAM™ RABS 930-01 Information provided by A. Schulman. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | |
Chengdu Polyster PPHA p-Hydroxybenzoic Acid Polymer PPHA is difficult to manufacture and brittle as well as low mechanical strength, its compounds have a higher mechanical strength and can be injection moulded. It can work without oil and its perform.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | cond; ISO 178 |
DSM EcoPaXX® Q-X07290 PA410-I Impact Modified |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
DuPont Performance Polymers Crastin® ST820 NC010 Polybutylene Terephthalate (PBT)
(Unverified Data**) Unreinforced Polybutylene Terephthalate with Excellent Impact Resistance Crastin ST820 NC010 is an unreinforced Super Tough polybutylene terephthalate resin for injection molding.Information provide.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | After conditioning at 23°C and 50% RH; ISO 178 |
Arkema Group Orgalloy® RS 60E10 Polyamide Alloy Polyamide Alloy, Rigid Blown film gradeTubes / Mandrels / Profiles / CablesInformation provided by Arkema Group |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Aclo Accutech Polypropylene HP0335T40V Homopolymer Talc Reinforced Approved to ESF-M4D355B White B12391 |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Ascend Performance Materials Vydyne® R220 Nylon 66, 40% mineral reinforced, Conditioned Vydyne® R220 is a 40% mineral-reinforced PA66 resin formulated for improved impact strength. Available in natural, it is an injection-molding grade formulated to retain the inherent processing adva.. |
|||
Flexural Strength | <= 50.0 MPa | <= 7250 psi | ISO 178 |
Polykemi AB POLYfill PPH T8020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | <= 50.0 MPa | <= 7250 psi | ISO 178 |
Polykemi AB POLYfill PPH TS15030 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
BASF Ultramid® B3M6 BK60564 30% Mineral Filled PA6 (Conditioned) Ultramid B3M6 BK60564 is a 30% mineral reinforced, pigmented black injection molding PA6 grade for industrial items requiring high impact strength and very high dimensional stability, excellent lase.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
BASF Ultramid® B3M6 Grey 22319 Q94 30% Mineral Filled PA6 (Conditioned) Description: 30% Mineral-filled injection molding grade for high impact industrial items having very high dimensional stability, such as automobile wheel covers.Information provided by BASF |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Ineos Nova Zyntar® 702 High Performance Flame Retardant Polystyrene
(discontinued **) Custom ColorsApplications: Injection molding, Gas-assist injection moldingThis is an impact grade of polystyrene containing chemicals to increase resistance to ignition in laboratory flame tests. L.. |