- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Molded
- Zhejiang Juner JEPPA003 High Glossy PP
Zhejiang Juner JEPPA003 High Glossy PP
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Molded |
| Manufacturer | Zhejiang Juner New Materials Co. |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Zhejiang Juner JEPPA003 High Glossy PP.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: High Glossy PartsInformation provided by Zhejiang Juner New Materials Co, Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.930 g/cc | 0.0336 lb/in³ | GB/1033 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | GB/15585 |
| Melt Flow | 3.0 g/10 min | 3.0 g/10 min |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 35.0 MPa | 5080 psi | GB/1040 |
| Flexural Strength | 50.0 MPa | 7250 psi | GB/9341 |
| Charpy Impact Unnotched | NB | NB | IS0179-1:2000 |
| Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | IS0179-1:2000 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 130 °C | 266 °F | GB1634 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | D257 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 165 - 250 °C | 329 - 482 °F | |
| Mold Temperature | 40.0 - 80.0 °C | 104 - 176 °F | |
| Drying Temperature | 85.0 °C @Time 10800 sec |
185 °F @Time 3.00 hour |
Horizontal Oven |
| 90.0 °C @Time 7200 sec |
194 °F @Time 2.00 hour |
Chute Hot-Wind | |
| Injection Pressure | 40.0 - 100 MPa | 5800 - 14500 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Speed of Shoot, % | 45-85 |
Users viewing this material also viewed the following:
- PolyChem Alloy 6004 Talc Nucleator
- Quantum Composites LYTEX® 4084 63% Glass Fiber Reinforced Epoxy SMC
- H.C. Starck Amperit® 110.074 Agglomerated Sintered (Mo-Mo2C)
- Solvay ANTAROX® L 62 LF Surfactant
- A. Schulman POLYFORT™ FXP 6630 Nylon 6.6 Polypropylene Alloy
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 40 PHR Non-Black, Oyster Shell Calcium Carbonate
- 3M FM291 Indoor UL Recognized Clear Polyester Overlaminate Label Products
- TSE Industries Millathane® HT High Temperature-Resistant Millable Polyester Polyurethane with 1.5 PHR Thanecure® ZM
- ExxonMobil Label-Lyte® 612 LL-112 Clear OPP Overlaminate
Copyright © lookpolymers.com All Rights Reserved