Polymer Property : Melt Flow = 24 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 °C	24 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products FRP255-01 Polypropylene Copolymer, Flame Retardant, Black Applications: Electrical component housingsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 °C	24 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products FT2202-732UV Thermoplastic Polyolefin, UV Stabilized, YGYA Black Applications: Box top railTail gate linerExterior trimInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 260 °C	24 g/10 min @Load 11.0 lb, Temperature 500 °F	[cm^3/10 min] Melt Volume Rate; ISO 1133
SABIC Innovative Plastics Cycoloy® FXC810AL PC+ABS (Europe-Africa-Middle East) CYCOLOY FXC810AL is a multi-purpose PC+ABS injection moulding grade, suitable for those applications that require Alpine White colour effects. The colour package may effect performance.This data was..
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 260 °C	24 g/10 min @Load 11.0 lb, Temperature 500 °F	ASTM D1238
SABIC Innovative Plastics Cycoloy® HC1204HF PC+ABS High heat PC/ABS blend offering good flow and excellent impact. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI).
Melt Flow	24 g/10 min @Load 3.80 kg, Temperature 280 °C	24 g/10 min @Load 8.38 lb, Temperature 536 °F	ASTM D1238
SABIC Innovative Plastics GELOY XP4034 ASA+PC (Asia Pacific) Weatherable, injection moldable ASA+PC blend. In a wide range of colors. Recommended for unpainted exterior/high heat applications.
Melt Flow	24 g/10 min @Load 1.20 kg, Temperature 300 °C	24 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D1238
SABIC Innovative Plastics Lexan® BFL4000U PC (Asia Pacific) Lexan* BFL4000U Polycarbonate resin is an injection moldable grade. It contains non-brominated, non-chlorinated flame retardant systems with UL-94 V0 rating and good impact/flow balance. Designed fo..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 °C	24 g/10 min @Load 4.76 lb, Temperature 446 °F	Condition L; ASTM D1238
PolyMirae Moplen HP640R Injection Molding Grade Polypropylene Moplen HP640R is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP640R is a homopolymer particularly suitable for injection molding..
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 190 °C	24 g/10 min @Load 11.0 lb, Temperature 374 °F
Total Finaprene® 602 Styrene-Butadiene TPE Copolymer Compound, Formulated to 61 Shore A  (discontinued **) Styrene-Butadiene CopolymerDescription: Finaprene® 602 is a thermoplastic elastomer type radial styrene-butadiene block copolymer. Thanks to its broad molecular weight distribution, Finaprene® 60..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 190 °C	24 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
M. Holland Company LL508 LLDPE  (discontinued **) Features: High ESCR (Stress Crack Resist.), Good Flexibility, High FlowUses: Closures, Household GoodsApprovals: FDA 21 CFR 177.1520(c) 3.1bProcessing Method: Injection MoldingInformation provided b..
Melt Flow	24 g/10 min	24 g/10 min	Condition I; ASTM D1238
Plaskolite Optix® PL-200 Acrylic Resin  (discontinued **) Injection molding grade pellets.Data provided by the manufacturer, Plaskolite, Inc.
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 190 Â°C	24 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238
LG Chemical LUTENE MB9205 LDPE Injection Molding Grade Description: The physical and structural characteristics of LUTENE MB9205 give it excellent flow properties and good productivity, clarity and surface gloss.Main Application: Lids of all sizes, hous..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 190 Â°C	24 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238
LG Chemical LUTENE MB9500 LDPE Injection Molding Grade Description: The physical and structural characteristics of LUTENE MB9500 give it excellent flow properties and good productivity, clarity and surface gloss.Main Application: Powder coating, artific..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 Â°C	24 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
IRPC Polimaxx Polene 3370RM Polypropylene Random Copolymer CHARACTERISTICS: GOOD EXTRUDABILITY, GOOD ADHESIVE, GOOD CLARITY, LOW NECK IN/ODOR HIGH SPEED APPLICATIONS: EXTRUSION COATING FOR COATED OPP FILM
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 200 Â°C	24 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ISO 1133
KratonÂ® D1113 B (SIS) Linear Triblock Copolymer Description: Kraton D1113 B is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from South America in the physical form identified: ..
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 300 Â°C	24 g/10 min @Load 11.0 lb, Temperature 572 Â°F	ASTM D1238
SABIC Innovative Plastics NORYL V01525 PPE+HIPS (Asia Pacific) Noryl* V01525 is a 15% milled fiber reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t..
Melt Flow	24 g/10 min @Load 6.60 kg, Temperature 337 Â°C	24 g/10 min @Load 14.6 lb, Temperature 639 Â°F	ASTM D1238
SABIC Innovative Plastics ULTEM AUT195 PEI+PCE High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method).
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 300 Â°C	24 g/10 min @Load 11.0 lb, Temperature 572 Â°F	ASTM D1238
Samsung Cheil Industries InfinoÂ® CA-7009 PA/PPE, Antistatic Information provided by Samsung Cheil Industries.
Melt Flow	24 - 28 g/10 min @Load 2.16 kg, Temperature 230 Â°C	24 - 28 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ASTM D1238
Samyang TrielÂ® 5301SP Thermoplastics Polyetherester Elastomer, Double Extrusion Excellent mechanical characteristics, elasticity, thermal resistance and chemical resistance.5301SP is intended for double extrusion.Information provided by Samyang.
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 260 Â°C	24 g/10 min @Load 11.0 lb, Temperature 500 Â°F	ISO 1133
Styron PulseÂ® 2000EZ PC/ABS Engineering ResinInformation provided by DowThis product line was spun off from Dow Chemical to Styron in 2010.
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 250 Â°C	24 g/10 min @Load 11.0 lb, Temperature 482 Â°F	ASTM D1238
SABIC Innovative Plastics ValoxÂ® EXVX1403 PBT (Asia Pacific) 33% GF reinforced, Non-Brominated & Non-Chlorinated Flame Retardant, PBT resin, Good thermal shock resistance and low CTE.
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 250 Â°C	24 g/10 min @Load 11.0 lb, Temperature 482 Â°F	ASTM D1238
SABIC Innovative Plastics ValoxÂ® IQNH4565 PBT (Asia Pacific) Valox* iQNH4565 resin is a non-brominated/non-chlorinated flame retardant product based on an environmentally sustainable Valox iQ* PBT resin. Post-consumer recycle (PCR) usage is 29% based on EPEAT..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 °C	24 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Polyram Metal Cap PPC372B73 Polypropylene, 73% Mineral Filled 73% mineral filled, heavy density polypropylene for molding metallized parts and galvanized coversInformation provided by Polyram Ram On Ind.
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 190 °C	24 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
A. Schulman POLYBATCH™ White LL8350 AP Concentrate Based In LLDPE DescriptionPOLYBATCH® LL8350 AP is an advanced performance white color concentrate containing 50% TiO2 in LLDPE. This product has been specifically engineered to provide improved resistance to phe..
Melt Flow	24 g/10 min @Load 5.00 kg, Temperature 240 °C	24 g/10 min @Load 11.0 lb, Temperature 464 °F	estimated from MVR using room temperature density; ISO 1133
Covestro Bayblend® FR 3020 Polycarbonate + ABS, Mineral Filled 5 % mineral filledfor thin-wall applicationsinjection moldingVicat/B 120 = 103 °CHDT/A = 85 °Cvery good UL listing in small wall thickness (V-0 at 0.75 mm)PreprocessingMax. Water content
Melt Flow	24 g/10 min	24 g/10 min	Melt Flow Ratio (I10/I2) is 7.3; ASTM D1238
Huntsman Rexell® L2101 Injection Molding LLDPE  (discontinued **) Linear-low very low density copolymer, injection molding, FDA compliant.Features: High flow, flexible with excellent environmental stress crack (ESCR), and warpage resistance.Applications: Fitments,..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 190 °C	24 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
Radici Heraform® R 3000 Acetal Copolymer Very easy flowing grade for injection molding of thin-walled parts or in case of long flow path.Information provided by Radici group.
Melt Flow	24 g/10 min	24 g/10 min	ASTM D1238
Huntsman PE2053 Injection Molding Polyethylene  (discontinued **) Homopolymer, Drug Master File listed product, and FDA compliant.Features: High flow characteristics, good gloss, and processability.Applications: Injection molding: large moldings including housewar..
Melt Flow	24 g/10 min @Load 2.16 kg, Temperature 230 °C	24 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
BP Amoco Acctuf® 3638 Impact Copolymer Polypropylene  (discontinued **) Suggested fabrication methods: Injection moldingFeatures: Compounding, AntistaticComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.