- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Impact Modified
- Samsung Cheil Industries Infino® CF-1030 PC, Unreinforced High Impact
Samsung Cheil Industries Infino® CF-1030 PC, Unreinforced High Impact
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Impact Modified |
| Manufacturer | Samsung, Cheil Industries |
| Trade Name | Infino® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Samsung Cheil Industries Infino® CF-1030 PC, Unreinforced High Impact.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Samsung Cheil Industries.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
| Melt Flow | 24 g/10 min @Load 10.0 kg, Temperature 250 °C |
24 g/10 min @Load 22.0 lb, Temperature 482 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM D785 |
| Tensile Strength at Break | 60.8 MPa | 8820 psi | 50 mm/min; ASTM D638 |
| Tensile Strength, Yield | 60.8 MPa | 8820 psi | 50 mm/min; ASTM D638 |
| Elongation at Break | 82 % | 82 % | 50 mm/min; ASTM D638 |
| Tensile Modulus | 1.96 GPa | 284 ksi | 50 mm/min; ASTM D638 |
| Flexural Strength | 82.4 MPa | 12000 psi | 2.8 mm/min; ASTM D790 |
| Flexural Modulus | 2.16 GPa | 313 ksi | 2.8 mm/min; ASTM D790 |
| Izod Impact, Notched | 2.55 J/cm @Thickness 6.35 mm |
4.78 ft-lb/in @Thickness 0.250 in |
ASTM D256 |
| 7.16 J/cm @Thickness 3.17 mm |
13.4 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 138 °C @Thickness 6.40 mm |
280 °F @Thickness 0.252 in |
ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 128 °C @Thickness 6.40 mm |
262 °F @Thickness 0.252 in |
ASTM D648 |
| Vicat Softening Point | 143 °C | 289 °F | B/50; ISO R306 |
| 145 °C | 293 °F | B/120; ISO R306 |
Users viewing this material also viewed the following:
- PTS Tristar® PC-10R-(V20) 20 MFI UV Stabilized Polycarbonate with Release
- PolyOne Dynaflex™ G7650-1 (Natural) Thermoplastic Elastomer (TPE)
- Alcoa KAMA 2200 Prime Graphic Arts OPS (discontinued **)
- Lubriplate 2 Cycle Motor Oil Motor Oil & Transmission Fluid
- A. Schulman SCHULAMID® 66 GF13 13% Glass Fiber Reinforced Nylon 66
- ArcelorMittal TRIP 780 Very high strength steel, Cold Rolled Steel
- Arlon 55146R030 0.030" (0.762 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- Advanced Polymer Alloys DuraGrip™ 6870 Thermoplastic Elastomer
- Master Bond Supreme 46HT-2ND2 Two Component, Non-Drip, Toughened, Epoxy Adhesive
Copyright © lookpolymers.com All Rights Reserved