- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 10 g/10 min
Polymer Property : Melt Flow = 10 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 7.0 - 10 g/10 min @Load 2.16 kg, Temperature 230 °C |
7.0 - 10 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
| NIZHNEKAMSKNEFTEKHIM PP 4215M (EP1X35F) Propylene and Ethylene Copolymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation r.. |
|||
| Melt Flow | 2.0 - 10 g/10 min @Load 1.20 kg, Temperature 300 °C |
2.0 - 10 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Polymer Resources PC-G40-[color]-1 Polycarbonate, 40% Glass Reinforced with Mold Release Polycarbonate, 40% Glass Reinforced with Mold ReleaseProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information.. |
|||
| Melt Flow | 5.0 - 10 g/10 min @Load 1.20 kg, Temperature 300 °C |
5.0 - 10 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Polymer Resources PC-UV1-D Polycarbonate, UV-stabilized, Low Flow Polycarbonate, UV-stabilized, Low FlowProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Po.. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Load 11.6 kg, Temperature 250 °C |
6.0 - 10 g/10 min @Load 25.6 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources PPX-GP2 Modified-PPO, General Purpose Modified-Polyphenylene Oxide, General Purpose, 250F HDTProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Informati.. |
|||
| Melt Flow | 2.0 - 10 g/10 min @Load 2.16 kg, Temperature 250 °C |
2.0 - 10 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Polymer Resources TP-GFMF2 Polybutylene Terephthalate, 40% Glass/Mineral Reinforced Polybutylene Terephthalate, 40% Glass/Mineral ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Informat.. |
|||
| Melt Flow | 5.0 - 10 g/10 min @Load 1.20 kg, Temperature 300 °C |
5.0 - 10 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| Polymer Resources PC-FR1-D-[color]-3 Polycarbonate, Improved Flame Retardant, Low Flow, UV-stabilized Polycarbonate, Improved Flame Retardant, Low Flow, UV-stabilizedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples... |
|||
| Melt Flow | 5.0 - 10 g/10 min @Load 5.00 kg, Temperature 200 °C |
5.0 - 10 g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
| Ineos Nova 602 Crystal Polystyrene GP Grade
(discontinued **) Broad, medium melt flow range, Broad Vicat rangeApplications: Any; Injection Molding and ExtrusionProperties were determined on injection molded specimens at 23°C and 50% R.H. unless otherwise spe.. |
|||
| Melt Flow | 7.0 - 10 g/10 min @Load 2.16 kg, Temperature 230 °C |
7.0 - 10 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
| NIZHNEKAMSKNEFTEKHIM PP 1500M (X30G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P.. |
|||
| Melt Flow | 8.0 - 10 g/10 min | 8.0 - 10 g/10 min | ASTM D1238 |
| Micropol Microlin ML21 Linear Polyethylene Rotational Molding Powder Information provided by Micropol Limited |
|||
| Melt Flow | 8.0 - 10 g/10 min @Load 2.16 kg, Temperature 235 °C |
8.0 - 10 g/10 min @Load 4.76 lb, Temperature 455 °F |
ASTM D1238 |
| Gromax PBT 1100-211S Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce.. |
|||
| Melt Flow | 2.0 - 10 g/10 min | 2.0 - 10 g/10 min | (Condition L) ASTM D-1238 |
| Multibase Multi-Flex® TPE A 4710 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
| Melt Flow | 9.0 - 10 g/10 min @Load 5.00 kg, Temperature 200 °C |
9.0 - 10 g/10 min @Load 11.0 lb, Temperature 392 °F |
Granulate; ISO 1133/H |
| SYNTHOS Krasten® 154 General Purpose Polystyrene Improved heat resistance, very good rheological properties.Examples of Application:Injection moulding – dishes, jars, Petri dishes, screw caps.Extrusion – blends with high impact polystyre.. |
|||
| Melt Flow | 4.0 - 10 g/10 min | 4.0 - 10 g/10 min | ASTM D1238 |
| Shuman 310 Utility Black PC/ABS Alloy Good impact strength, easy processability, good surface gloss, good chemical resistance Formerly Shuman 705 ABS/PC AlloyInformation provided by Shuman Plastics, Inc. |
|||
| Melt Flow | 4.0 - 10 g/10 min | 4.0 - 10 g/10 min | ASTM D1238 |
| Shuman 380 Grey PC/ABS Alloy Good impact strength, easy processability, good surface gloss, good chemical resistance Formerly Shuman 705 ABS/PC AlloyInformation provided by Shuman Plastics, Inc. |
|||
| Melt Flow | 7.0 - 10 g/10 min @Temperature 230 °C |
7.0 - 10 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman POLYFORT™ FPP 2122UV-M-31 Black, Talc Filled Copolymer Polypropylene DescriptionPolyfort® FPP 2122UV-M-31 is a black 40% talc filled polypropylene. It is weather and urethane contact resistant and contains a mold release. Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Temperature 230 °C |
6.0 - 10 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman PP 1259 Polypropylene Medium Impact Polypropylene DescriptionPolypropylene PP 1259 is a medium impact polypropylene with easier molding characteristics for thinner parts and longer flow distances. Lower molding pressures and heats often reduce war.. |
|||
| Melt Flow | 5.0 - 10 g/10 min @Temperature 230 °C |
5.0 - 10 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| A. Schulman POLYFORT™ FPP 1285 Glass Fiber-Reinforced Copolymer Polypropylene DescriptionPolyfort® FPP1285 is a 20% glass fiber-reinforced copolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 7.0 - 10 g/10 min @Temperature 230 °C |
7.0 - 10 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| A. Schulman POLYFORT™ FPP 2388 Glass Reinforced Polypropylene DescriptionPolyfort® FPP 2388 is a 5% glass reinforced polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Temperature 230 °C |
6.0 - 10 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman PP 1259 Polypropylene Medium Impact Polypropylene DescriptionPolypropylene PP 1259 is a medium impact polypropylene with easier molding characteristics for thinner parts and longer flow distances. Lower molding pressures and heats often reduce war.. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Temperature 230 °C |
6.0 - 10 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| A. Schulman POLYFORT™ FPP 809 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 809 is a 40% talc-filled homopolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Temperature 230 °C |
6.0 - 10 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| A. Schulman POLYFORT™ FPP 809 Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 809 is a 40% talc-filled homopolymer polypropylene.Information provided by A. Schulman. |
|||
| Melt Flow | 5.0 - 10 g/10 min | 5.0 - 10 g/10 min | 230/2.16; May be specified; ASTM D1238 |
| Plastics Group Polifil® GFPPCC-20 20% Glass Reinforced Polypropylene Polifil® GFPPCC series compounds are homopolymer polypropylenes reinforced with chemically coupled glass fibers. These compounds offer superior strength and stiffness, improved elevated temperature.. |
|||
| Melt Flow | 5.0 - 10 g/10 min | 5.0 - 10 g/10 min | ISO 1133 |
| Chengdu Polyster FH2040 Thermoplastic Polyether-ester Elastomer (TPEE) Blend of H2040 and self-made flame retardant material. Excellent flex resistance at low temperatures. Excellent flex-fatigue resistance. Applications requiring flexibility at low temperatures and fl.. |
|||
| Melt Flow | 5.0 - 10 g/10 min | 5.0 - 10 g/10 min | ISO 1133 |
| Chengdu Polyster FH7560 Thermoplastic Polyether-ester Elastomer (TPEE) Blend of H7560 and self-made flame retardant material. Flame retardant, high tear resistance. Applications requiring flame retardancy, such as wires, cables and optical fiber.Information provided by.. |
|||
| Melt Flow | 3.0 - 10 g/10 min @Load 5.00 kg, Temperature 230 °C |
3.0 - 10 g/10 min @Load 11.0 lb, Temperature 446 °F |
ISO 1133 |
| Eurostar Starpylen MFB44S PP, Glass Bead/Glass Fiber Filled Starpylen MFB44S is a Glass Beads, Glass Fiber Reinforced, Polypropylene Injection Molding Resin heat stabilized (also known as Starpylen WS 2020VK S37.7)Information provided by Eurostar. |
|||
| Melt Flow | 5.0 - 10 g/10 min @Load 5.00 kg, Temperature 230 °C |
5.0 - 10 g/10 min @Load 11.0 lb, Temperature 446 °F |
ISO 1133 |
| Eurostar Starpylen MZ006S PP, Glass Fiber Filled, Injection Molded Starpylen MZ006S is a Glass fiber Reinforced, Polypropylene Injection Molding Resin heat stabilized (also known as Starpylen WT 30GF S3)Information provided by Eurostar. |
|||
| Melt Flow | 6.0 - 10 g/10 min | 6.0 - 10 g/10 min | ASTM D1238 |
| Buckeye Polymers BP RPP 2008 T NAT Polypropylene, Talc Filled Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and .. |
|||
| Melt Flow | 7.0 - 10 g/10 min @Temperature 230 °C |
7.0 - 10 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman POLYFORT™ FPP 2122UV-M-31 Black, Talc Filled Copolymer Polypropylene DescriptionPolyfort® FPP 2122UV-M-31 is a black 40% talc filled polypropylene. It is weather and urethane contact resistant and contains a mold release. Information provided by A. Schulman. |
|||
| Melt Flow | 6.0 - 10 g/10 min @Load 2.16 kg, Temperature 230 °C |
6.0 - 10 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Samyang Triel® 5206SP Thermoplastics Polyetherester Elastomer, Double Extrusion Excellent mechanical characteristics, elasticity, thermal resistance and chemical resistance.5206SP is intended for double extrusion.Information provided by Samyang. |
|||
Copyright © lookpolymers.com All Rights Reserved