- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 4710 NAT
Multibase Multi-Flex® TPE A 4710 NAT
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 4710 NAT.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | ASTM D955 |
| Melt Flow | 2.0 - 10 g/10 min | 2.0 - 10 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 44 | 44 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 2.48 MPa | >= 360 psi | ASTM D412 |
| Elongation at Break | >= 525 % | >= 525 % | ASTM D412 |
| Tear Strength | >= 15.5 kN/m | >= 88.4 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Global EPP PA 6C HS BLUE Cast Polyamide 6 + UV and Heat Stabilizers
- Ineos K38-20X2091 HDPE
- Styrolution NOVODUR® P3H-AT ABS, Injection Grade
- SK Chemicals SKYTHANE® S398A Polyester Based Thermoplastic Polyurethane Elastomer
- Solvay MIRACARE® SLB-205/N Surfactant
- Teknor Apex Sinvicomp SIM 6029 Polyvinyl Chloride, Flexible
- Dow TUFLIN™ HS-7041 NT 7 Linear Low Density Polyethylene Resin
- BASF Novolen® 1100 RC Polypropylene, Injection Molding Grade
- SABIC Innovative Plastics LNP LUBRICOMP DFL369XF PC (Asia Pacific)
Copyright © lookpolymers.com All Rights Reserved