Polymer Property : Density = 0.0459 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most.

Physical Properties	Metric	English	Comments
Density	1.27 - 1.277 g/cc	0.0459 - 0.04613 lb/in³	relative
Oceanchem Group Bromobutane (N-Butyl Bromide) Molecular Formula: C4H9BrCas No.: 109-65-9Application: Organic SynthesisStorage: The product should be stored in a cool and dry place.Information Provided by Oceanchem Group
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183-1
Quadrant EPP Duratron® PEI U1000 PEI, unfilled, extruded (ISO Data) Duratron U1000 PEI is an amber translucent (non-optical quality) amorphous thermoplastic material, offering high strength and heat resistance. It performs continuously to 170 °C, making it ideal fo..
Density	1.27 g/cc	0.0459 lb/in³
Eastman Eastar GN101 PETG Copolyester  (discontinued **) ISO data as provided by the manufacturer, Eastman Chemical
Density	1.27 g/cc	0.0459 lb/in³	ASTM D792
Rotuba M Cellulose Acetate Property values at 50% RH.Data provided by the manufacturer.
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183
Polycasa LENTICULAR PETG Good ink adhesionGood receptabilityStable sheet dimensionsHigh impact strengthGood chemical resistanceEnvironmentally safeRecyclableMeets current food contact legislationDisplays Graphic Arts Advert..
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183
Polykemi AB SCANMID 6 B22^ E F20 Nylon 6, Glass Fiber Reinforced, Modified Information provided by Polykemi AB
Density	1.27 g/cc	0.0459 lb/inÂ³	DIN 53479; ASTM D792
Kolon KOPELÂ® KP3372 General Purpose TPE Resin KOPELÂ® is a thermoplastic polyester elastomer which is a new engineering rubber having combined properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very..
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM 1000R PEI (Europe-Africa-Middle East) Standard flow Polyetherimide (Tg 217C) with internal mold release. Resin is RoHS compliant. UL94 V0, V2 and 5VA listing.
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM 1010P PEI Enhanced flow Polyetherimide (Tg 217C) in 350 micron powder. ECO Conforming.
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Ultem 1100V PEI (Europe-Africa-Middle East) Transparent, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 VO and 5VA listing; color dependant, see UL Yellow Card.This data was supplied by SABIC-IP for the Europe-Africa-Middle Eas..
Density	1.27 g/cc	0.0459 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP RX85514 PA 66 (Asia Pacific) LNP* LUBRICOMP* RX85514 is a compound based on Nylon 66 resin containing Proprietary Filler(s). Added features of this material include: Internally Lubricated.
Density	1.27 g/cc	0.0459 lb/inÂ³	ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP YL003 Polyester Elastomer LNP* LUBRICOMP* YL003 is a compoudn based on Polyester Elastomer resin containing 15% PTFE. Added feature of this grade is: Wear Resistant.
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM 9011 PEI (Europe-Africa-Middle East) Transparent, high flow Polyetherimide (Tg 217C). Resin is RoHS compliant. Improved processability for Fiber extrusion.
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics Ultem DT1800E PEI Blend (Europe-Africa-Middle East) Improved ductility, transparent, standard flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Afri..
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM HU1000 PEI Transparent, standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI)..
Density	1.27 g/cc	0.0459 lb/inÂ³	dry; ISO 1183
Styrolution TerblendÂ® N NG-06 30% Glass Filled ABS/PA6 (Conditioned) Terblend N NG-06 is a 30% glass fiber reinforced ABS/PA6 blend with extra high rigidity and dimensional stability.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS..
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183B
Styron CALIBREâ„¢ 7100-15 Polycarbonate CALIBREâ„¢ 7100-15 glass-reinforced resin offers increased modulus and improved heat distortion resistance, with minimal shrinkage. It also offers outstanding UL-94 flammability ratings. CALIBR..
Density	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
SABIC Innovative Plastics ULTEM 1000P PEI (Europe-Africa-Middle East) Standard flow Polyetherimide (Tg 217C) in 350 micron powder. Resin is RoHS compliant.
Density	1.27 g/cc	0.0459 lb/in³	ASTM D792
PlastxWorld CEVIAN® SKG10 10% GF ABS Glass fiber reinforced, heat resistant and flame retarded ABS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by Plast..
Density	1.27 g/cc	0.0459 lb/in³	ASTM D792
Westlake Plastics Tempalux® Film Made from ULTEM® Polyetherimide Resin High heat deflection and continuous use temperature. Inherent flame resistance. Extremely low NBS smoke evolution & superior limiting oxygen index.Ultem® is a trade name of GE Plastics. Informat..
Density	1.27 g/cc	0.0459 lb/in³	Cured resin
Hexcel® HexPly® ES70 120°C Curing Epoxy Matrix HexPly® ES70 is a structural epoxy resin particularly well adapted to low pressure molding processes. This system is versatile and allows a polymerization from 100°C (212°F) up to 150°C (302°F)..
Density	1.27 g/cc	0.0459 lb/in³	Cured
Hexcel® HexPly® M20 266°F (130°C) Curing Epoxy Matrix M20 was designed to meet need for high temperature performance combined with a low energy cure cycle. Suitable for aircraft primary and secondary structures, and composite repair.Information provi..
Density	1.27 g/cc	0.0459 lb/in³	(DAM); ISO 1183
DSM Akulon® F249-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Cond) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Density	1.27 g/cc	0.0459 lb/in³
DuPont Performance Polymers Crastin® LW9330 NC010 PBT+SAN  (Unverified Data**) 30% Glass Reinforced Polybutylene Terephthalate Blend with Low Warpage Characteristics Crastin LW9330 NC010 is a 30% glass fiber reinforced polybutylene terephthalate blend for injection molding. I..
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183
Eurotec® Tecomid® NB30 GR13 BK EF PA6, 13% glass fiber reinforced, black, suitable for electrostatic powder coating Information provided by Eurotec®
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183
Eurotec® Tecomid® NB40 GR20 NL PA 6 20% glass fiber reinforced Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good..
Density	1.27 - 1.46 g/cc	0.0459 - 0.0527 lb/in³	Average value: 1.32 g/cc Grade Count:15
Overview of materials for Nylon 66, 40% Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 40% Carbon Fiber Filled". Specific grades with carbon fiber content between 35% and 44% are in..
Density	1.27 g/cc	0.0459 lb/in³	dry; ISO 1183
DSM Stanyl® TS271A1 PA46-RF Aramid fiber reinforced, Wear and Friction Modified
Density	1.27 g/cc	0.0459 lb/in³	ISO 1183
LATI LARIL 13 G/30 30% Glass Fiber Reinforced Polyphenylene Oxide (PPOm)  (Unverified Data**) Description: Laril thermoplastics are polyphenylene oxide (PPOm) products. They exhibit excellent toughness, even at low temperatures, good thermal resistance and dimensional stability are the most ..