SABIC Innovative Plastics LNP LUBRICOMP RP003 PA 66

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP RP003 PA 66.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

LNP* LUBRICOMP* RP003 is a compound based on Nylon 66 resin containing 15% PTFE/Silicone. Added feature of this material is: Wear Resistant.

Physical Properties	Metric	English	Comments
Density	1.27 g/cc	0.0459 lb/inÂ³	ASTM D792
	1.27 g/cc	0.0459 lb/inÂ³	ISO 1183
Moisture Absorption	0.600 %	0.600 %	50% RH, 24 hrs; ASTM D570
	0.970 %	0.970 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	>= 0.020 cm/cm @Time 86400 sec	>= 0.020 in/in @Time 24.0 hour	ISO 294
Linear Mold Shrinkage, Transverse	0.010 - 0.030 cm/cm @Time 86400 sec	0.010 - 0.030 in/in @Time 24.0 hour	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	49.0 MPa	7110 psi	Type I, 5 mm/min; ASTM D638
	55.0 MPa	7980 psi	5 mm/min; ISO 527
Tensile Strength, Yield	52.0 MPa	7540 psi	Type I, 5 mm/min; ASTM D638
	55.0 MPa	7980 psi	5 mm/min; ISO 527
Elongation at Break	4.7 %	4.7 %	Type I, 5 mm/min; ASTM D638
	4.7 %	4.7 %	5 mm/min; ISO 527
Elongation at Yield	4.6 %	4.6 %	Type I, 5 mm/min; ASTM D638
	4.8 %	4.8 %	5 mm/min; ISO 527
Tensile Modulus	2.69 GPa	390 ksi	50 mm/min; ASTM D638
	2.96 GPa	429 ksi	1 mm/min; ISO 527
Flexural Strength	73.0 MPa	10600 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Yield Strength	73.0 MPa	10600 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.26 GPa	328 ksi	1.3 mm/min, 50 mm span; ASTM D790
	2.58 GPa	374 ksi	2 mm/min; ISO 178
Izod Impact, Notched	0.370 J/cm	0.693 ft-lb/in	ASTM D256
Izod Impact, Unnotched	3.79 J/cm	7.10 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	4.00 kJ/mÂ²	1.90 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	26.0 kJ/mÂ²	12.4 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	1.00 J	0.738 ft-lb	Instrumented Impact Energy @ peak; ASTM D3763
Coefficient of Friction, Dynamic	0.22	0.22	ASTM D3702 Modified
Coefficient of Friction, Static	0.16	0.16	ASTM D3702 Modified
K (wear) Factor	20.1 x 10^-8 mmÂ³/N-M	10.0 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	90.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	50.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	91.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	50.6 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	95.4 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	53.0 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	96.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	53.3 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	221 Â°C	430 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	201 Â°C @Thickness 3.20 mm	394 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	66.0 Â°C	151 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	59.0 Â°C @Thickness 3.20 mm	138 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: