Polymer Property : Density = 0.0383 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
PolyOne OnFlex™ S KE 40A-3S1727 Thermoplastic Elastomer (TPE) OnFlex™-S KE thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to a variety p..
Density	1.06 - 1.38 g/cc	0.0383 - 0.0499 lb/in³	Average value: 1.18 g/cc Grade Count:14
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), Glass Bead Filled This property data is a summary of similar materials in the MatWeb database for the category "ABS + Glass Blend". Each property range of values reported is minimum and maximum values of appropriate ..
Density	1.06 g/cc	0.0383 lb/in³
Ineos ABS Lustran® 2863 (discontinued **) Special grade for smart cards.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La..
Density	1.06 g/cc	0.0383 lb/in³
Ineos ABS Lustran® QE 1120, Extrusion Grade (discontinued **) General purpose extrusion grade.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with ..
Density	1.06 g/cc	0.0383 lb/in³
Ineos ABS Lustran® QE 1455, Injection Grade (discontinued **) Injection molding grade, increased heat resistance, medium gloss.Applications: Automotive: interior parts.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renam..
Density	1.06 g/cc	0.0383 lb/inÂ³	ISO 1183
Lucobit LucofinÂ® 1410-t2 Polyolefin TPO Granules, Grey Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t2 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Density	1.06 g/cc	0.0383 lb/inÂ³	ISO 1183
Lucobit LucofinÂ® 1411-t2 Polyolefin TPO Granules, White Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t2 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and ..
Density	1.06 g/cc	0.0383 lb/inÂ³
Ineos ABS TriaxÂ® KU 2-3050 ABS + Polyamide Blend (DAM) Key Features:UnfilledHigh impact or high impact modifiedLight stabilized or stable to lightHeat stabilized or stable to heatSuitable processing methods:Injection molding
Density	1.06 g/cc	0.0383 lb/inÂ³
Stellarchem LP-855 TPE Compound This grade of Stellarchem TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, complete..
Density	1.06 g/cc	0.0383 lb/inÂ³	ASTM D792
Techmer ES ElectrablendÂ® HDPE C BK Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/Reinfor.Features: ConductiveAppearance: BlackTPCI# 9411115Information provided by TP Composites, Inc.
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Lubrizol Hipscon™ B-515 Static Control Polystyrene Hipscon™ B-515 is a carbon black-filled, Polystyrene compound available in compound form. Hipscom™ B-515 compound maintains extremely low gloss surfaces after molding, allowing for easy reading o..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
PlastxWorld CEVIAN® LMB10 Laser Markable Grade ABS Black MarkingThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
Polyram RamOfin PPH343T4BK10 Polypropylene, 20% Mineral Filled 20% Mineral filled, heat resistant polypropylene for injection molding applications.Information provided by Polyram.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
Covestro Desmopan® DP 9370A Polyurethane Extrusion- and injection molding gradevery good hydrolysis and microbial resistancegood low-temperature flexibilityfree from plasticizershigh moisture vapor transmission rateApplicationbreathable fi..
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® ST7301 BK356 Nylon 6 (Unverified Data**) Super Toughened Polyamide 6 Zytel ST7301 BK356 is a Super Tough heat stabilized lubricated black polyamide 6 resin for injection molding and extrusion. It offers outstanding impact resistance over a..
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
EMS-Grivory Grivory® CA 6 E PA* Product description: Grilon CA 6 E is a non-extracted copolyamide with a low melting point. Grilon CA 6 E characterizes itself through the following properties Very high flexibility and toughnessVer..
Density	1.06 g/cc	0.0383 lb/in³	DAM; ISO 1183
DuPont Performance Polymers Zytel® 153HSL NC010 Nylon 612 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 612 Information provided by DuPont Performance Polymers
Density	1.06 g/cc	0.0383 lb/in³
BASF 1-(2-Hydroxyethyl)piperazine Formula: C6H14N2OCAS: 103-76-4Description: 1-(2-Hydroxyethyl)piperazine is a colorless to yellowish liquid with an amine-like odor. It is miscible in water.Synonyms: 1-Amino-2-propanol, Monoisoprop..
Density	1.06 g/cc	0.0383 lb/in³	Silicone Property; Arlon SQA-TMS-024
Arlon P31000A005 0.005" Uncured Silicone Rubber with PTFE Coated Fiberglass Carrier Design/Construction:Liner: 0.001" FEP FilmSide 1: Uncured Silicone RubberCarrier: 0.003" PTFE coated FiberglassThis data represents typical values for the production material and should not be us..
Density	1.06 g/cc	0.0383 lb/in³
BASF Luranyl® KR 2420 Polyphenylene Ether + Styrene-Butadiene Blend Grade with high resistance to heat deformation and outstanding impact strength. For auto parts such as air vents or the instrument panel; also used for door-mirror housings.Data was collected by IS..
Density	1.06 g/cc	0.0383 lb/in³	Uncured
3M Scotch-Weld™ EC100 General Purpose Instant Adhesive 3M™ Scotch-Weld™ General Purpose Instant Adhesives are single component, high strength ethyl cyanoacrylate adhesive designed to bond to a variety of substances including most plastics, rubbers, me..
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183A
Ineos Nova 212 Crystal Polystyrene Low Flow Grade (discontinued **) Excellent balance of properties; Extrusion and Injection MoldingApplications: Foam insulation, XPS food packaging, Sheet and profile extrusion, CD and DVD jewel boxesProperties were determined on i..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
SABIC Innovative Plastics LNP LUBRICOMP CL001I PS LNP* Lubricomp* CL001I is a compound based on Polystyrene resin containing 5% PTFE. Added features of this material include: Internally Lubricated, High Impact.
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Polymer Resources PPX-GP5 Modified PPO, General Purpose with HDT of 270 F (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183
SABIC Innovative Plastics NORYL FXN119BK PPE+HIPS Noryl* FXN119BK is a low gloss PPE/HIPS grade. It provides a balance of mechanical properties and heat performance with intrinsic low gloss appreance. FXN119BKBK is available in black only.
Density	1.06 g/cc	0.0383 lb/in³	ISO 1183A
Ineos Nova 207 Crystal Polystyrene High Heat, High Flow Grade (discontinued **) Fast cycling, Excellent flow characteristics, Extrusion and Injection Molding Applications: XPS sheet, Foam insulation, CD and DVD jewel boxesProperties were determined on injection molded specimen..
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
Polymer Resources PPX-FR3 Modified PPO, UL 94 V-1 with HDT of 265 F (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Density	1.06 g/cc	0.0383 lb/in³	ASTM D792
PlastxWorld DAICEL STYROL® SK60 HIPS UV stable flame retarded HIPSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.