- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- Westlake Mxsten CV77523 Polyethylene Plastomer
Westlake Mxsten CV77523 Polyethylene Plastomer
| Category | Polymer , Thermoplastic , Polyethylene (PE) |
| Manufacturer | Westlake Chemical Corporation |
| Trade Name | Mxsten |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Westlake Mxsten CV77523 Polyethylene Plastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Mxsten CV plastomer CV77523 is a polyethylene plastomer designed for blown film extrusion that contains high slip, very high antiblock and polymer processing aid additives. Films produced with this resin exhibit very good strength properties and low seal initiation temperatures.Application/UsesAgricultural tubingBlown filmCo-ex filmsFDA: This material complies with FDA regulations in 21 CFR, section 177.1520.All information provided by Westlake Chemical
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.906 g/cc | 0.0327 lb/in³ | ASTM D1505 |
| Thickness | 25.4 microns | 1.00 mil | |
| Melt Flow | 0.50 g/10 min | 0.50 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Tensile Strength at Yield, TD | 7.58 MPa | 1100 psi | ASTM D882 |
| Film Elongation at Break, MD | 600 % | 600 % | ASTM D882 |
| Film Elongation at Break, TD | 1000 % | 1000 % | ASTM D882 |
| Elmendorf Tear Strength MD | 450 g | 450 g | ASTM D1922 |
| Elmendorf Tear Strength TD | 650 g | 650 g | ASTM D1922 |
| Dart Drop | 47.2 g/micron | 1200 g/mil | ASTM D1709 |
| Film Tensile Strength at Break, MD | 62.1 MPa | 9000 psi | ASTM D882 |
| Film Tensile Strength at Break, TD | 44.8 MPa | 6500 psi | ASTM D882 |
| 1% Secant Modulus, MD | 124 MPa | 18000 psi | ASTM D882 |
| 1% Secant Modulus, TD | 145 MPa | 21000 psi | ASTM D882 |
| Heat Seal Strength Initiation Temperature | 82.0 °C | 180 °F | Westlake |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Haze | 30 % | 30 % | ASTM D1003 |
| Gloss | 35 % | 35 % | at 45º; ASTM D2457 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Blow-up Ratio (BUR) | 2.4 | 2.4 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Process | Blown Film | |
| Film | ||
| Region | US & Canada | Bamberger Polymers Distribution |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved