- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Polyurethane, Elastomer, Unreinforced
- Sorbothane Polyurethane Damping Material, 30 Durometer
Sorbothane Polyurethane Damping Material, 30 Durometer
| Category | Polymer , Thermoset , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Sorbothane |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sorbothane Polyurethane Damping Material, 30 Durometer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Sorbothane® is a thermoset, polyether-based polyurethane viscoelastic material that combines high energy absorption with faultless memory. Sorbothane turns mechanical energy into heat. As the material is deformed, the friction created at the molecular level is generated into heat. High hysteresis is then formed. The energy is moved perpendicularly away from its original plane and is pushed close to 90° out of phase from its original disturbing force.Sorbothane is used in shock/vibration mounts, stud mounts, and grommets/bushings in diverse fields such as electronics/audio equipment, noise abatement, insoles, protective sports gear, and anti-vibration gloves and wraps.Information provided by Sorbothane Inc
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.30 g/cc | 0.0470 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 0.520 MPa | 75.4 psi | 500 mm/min; ASTM D412 80 |
| Tensile Strength, Yield | 0.110 MPa @Strain 100 % |
16.0 psi @Strain 100 % |
ASTM D412 80 |
| Elongation at Break | 500 % | 500 % | 500 mm/min; ASTM D412 80 |
| Compressive Yield Strength | 0.300 MPa | 43.5 psi | 50% strain; ASTM D575 Method A |
| Resilience | 10 | 10 | Lupke rebound test |
| Coefficient of Friction | 3.3 | 3.3 | on polished steel; ASTM D1894 |
| Coefficient of Friction, Static | 15.8 | 15.8 | on polished steel; ASTM D1894 |
| Tear Strength Test | 17.2 | 17.2 | psi per ASTM 624 with 1 mm nick |
| Compression Set | 9.7 % | 9.7 % | 72 hr/73°F/25% compression - ASTM 395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 132 µm/m-°C @Temperature -50.0 - 100 °C |
73.3 µin/in-°F @Temperature -58.0 - 212 °F |
|
| Thermal Conductivity | 0.370 W/m-K | 2.57 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | <= 82.0 °C | <= 180 °F | Optimum performance range |
| Minimum Service Temperature, Air | >= -29.0 °C | >= -20.2 °F | optimum performance range |
| Glass Transition Temp, Tg | -46.0 °C | -50.8 °F | |
| Flammability, UL94 | V-2 | V-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 11.1 kV/mm | 282 kV/in | BS 903 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved