BASF Ultramid® 8231G HS 14% Glass Filled PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 10% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8231G HS 14% Glass Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultramid 8231G HS is a heat stabilized, 14% glass fiber reinforced nylon 6 injection molding compound. It is also available in non-heat stabilized (Ultramid 8231) and/or pigmented versions. The glass fiber reinforcement enhances performance such as strength, stiffness and heat deflection temperature. The heat stabilizer system extends the properties at elevated temperatures. It also has excellent chemical resistance to greases, oils and hydrocarbons. njection molding compound possessing a balance of engineering properties combined with excellent processability and surface aesthetics.

Physical Properties	Metric	English	Comments
Density	1.067 g/cc	0.03855 lb/in³	Melt; ISO 1183
	1.23 g/cc	0.0444 lb/in³	ISO 1183
Water Absorption	1.4 %	1.4 %	24 hour; ISO Test
	8.1 %	8.1 %	ISO 62
Moisture Absorption at Equilibrium	2.3 %	2.3 %	23°C/50% R.H.; ISO 62
Viscosity Measurement	50	50	Formic Acid
Linear Mold Shrinkage	0.0050 cm/cm	0.0050 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	121	121	ASTM Test
Tensile Strength at Break	140 MPa	20300 psi	0.2 in/min; ASTM Test
	50.0 MPa @Temperature 120 °C	7250 psi @Temperature 248 °F	ISO Data
	50.0 MPa @Temperature 120 °C	7250 psi @Temperature 248 °F	ASTM Test
	60.0 MPa @Temperature 80.0 °C	8700 psi @Temperature 176 °F	ASTM Test
	60.0 MPa @Temperature 80.0 °C	8700 psi @Temperature 176 °F	ISO Data
	160 MPa @Temperature -40.0 °C	23200 psi @Temperature -40.0 °F	ISO Data
	160 MPa @Temperature -40.0 °C	23200 psi @Temperature -40.0 °F	ASTM Test
Tensile Strength, Ultimate	140 MPa	20300 psi	5mm/min; ISO 527
Elongation at Break	4.0 %	4.0 %	5mm/min; ISO 527
	4.0 %	4.0 %	0.2 in/min; ASTM Test
	3.0 % @Temperature -40.0 °C	3.0 % @Temperature -40.0 °F	ASTM Test
	3.0 % @Temperature -40.0 °C	3.0 % @Temperature -40.0 °F	ISO Data
	7.0 % @Temperature 120 °C	7.0 % @Temperature 248 °F	ISO Data
	7.0 % @Temperature 120 °C	7.0 % @Temperature 248 °F	ASTM Test
	8.0 % @Temperature 80.0 °C	8.0 % @Temperature 176 °F	ASTM Test
	8.0 % @Temperature 80.0 °C	8.0 % @Temperature 176 °F	ISO Data
Tensile Modulus	5.96 GPa	864 ksi	1mm/min; ISO 527
	2.09 GPa @Temperature 120 °C	303 ksi @Temperature 248 °F	ISO Data
	2.47 GPa @Temperature 80.0 °C	358 ksi @Temperature 176 °F	ISO Data
	5.95 GPa @Temperature -40.0 °C	863 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	160 MPa	23200 psi	ISO Data
	172 MPa	24900 psi	ASTM Test
	76.0 MPa @Temperature 120 °C	11000 psi @Temperature 248 °F	ASTM Test
	90.0 MPa @Temperature 93.0 °C	13100 psi @Temperature 199 °F	ASTM Test
	110 MPa @Temperature 65.0 °C	16000 psi @Temperature 149 °F	ASTM Test
	214 MPa @Temperature -40.0 °C	31000 psi @Temperature -40.0 °F	ASTM Test
Flexural Modulus	4.77 GPa	692 ksi	ISO Data
	5.31 GPa	770 ksi	ASTM Test
	1.93 GPa @Temperature 120 °C	280 ksi @Temperature 248 °F	ASTM Test
	2.40 GPa @Temperature 65.0 °C	348 ksi @Temperature 149 °F	ASTM Test
Izod Impact, Notched	0.590 J/cm @Thickness 3.17 mm	1.11 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	5.00 kJ/m²	2.38 ft-lb/in²	ISO Test
Charpy Impact Unnotched	4.00 J/cm²	19.0 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.650 J/cm²	3.09 ft-lb/in²	ISO 179
	0.550 J/cm² @Temperature -30.0 °C	2.62 ft-lb/in² @Temperature -22.0 °F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature -30.0 - 30.0 °C	27.8 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	39.0 µm/m-°C	21.7 µin/in-°F	ISO 11359
CTE, linear, Transverse to Flow	78.0 µm/m-°C	43.3 µin/in-°F	ISO 11359
Specific Heat Capacity	2.728 J/g-°C	0.6520 BTU/lb-°F	Melt
Thermal Conductivity	0.230 W/m-K	1.60 BTU-in/hr-ft²-°F	Melt
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	217 °C	423 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	195 °C	383 °F	ISO 75
	200 °C	392 °F	ASTM Test
Flammability, UL94	HB @Thickness 0.750 mm	HB @Thickness 0.0295 in
	HB @Thickness 3.00 mm	HB @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	3.4 @Frequency 1.00e+6 Hz	3.4 @Frequency 1.00e+6 Hz	IEC 60250
	3.6 @Frequency 100 Hz	3.6 @Frequency 100 Hz	IEC 60250
	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	ASTM Data
	4.0 @Frequency 1e+9 Hz	4.0 @Frequency 1e+9 Hz	ASTM Data
Dielectric Strength	40.0 kV/mm	1020 kV/in	IEC 60243-1
Dissipation Factor	0.010 @Frequency 1e+9 Hz	0.010 @Frequency 1e+9 Hz	ASTM Data
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	ASTM Data
	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	95.0 °C	203 °F	Injection molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
UL.UL-C	Yes

Users viewing this material also viewed the following: