Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Surface Resistance = 1.00e+10 ohm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Electrical Properties Metric English Comments
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ASTM D257
S&E Specialty Polymers G-04-036ESD PVC
Application: High Performance, PVC based compound with antistatic properties. G-04-036ESD is suitable for Gamma radiation sterilization.Information provided by S&E Specialty Polymers
Surface Resistance 1.00e+10 - 1.00e+11 ohm
1.00e+10 - 1.00e+11 ohm
IEC 60093
Raschig Group MELOPLAS® 3025 MF
Cellulose-reinforced and inorganically filled MF molding compound in white and colored shades. High surface hardness, good UV and heat stability, very good resistance to chemicals - also to foodstu..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Hexion Bakelite™ PF 84 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets, High Mechanical Strength &
Phenolic molding compound, organically filled, reinforced with cotton fibers, increased notched impact strength, standardized molding compound.Application areas: Contact support power switch, moldin..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Hexion Bakelite™ PF 13591 Phenolic Formaldehyde Resin, High Surface Quality, UL Listed  (discontinued **)
Phenolic molding compound, mainly organically filled, very soft flow for large molds, UL listed molding compound 1.5 mm/V-1 (BK), 3.0 mm/V-0 (BK).Application areas: Pan handles, various applications..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Hexion Bakelite™ X24 Phenolic Formaldehyde Resin  (discontinued **)
Phenolic molding compound, mainly organically filled.Application areas: Operating controls, housing parts, lamp holders.Information provided by Bakelite AGBakelite AG became a part of Hexion in 2005..
Surface Resistance 1.00e+10 - 1.00e+15 ohm
1.00e+10 - 1.00e+15 ohm
Average value: 3.35e+14 ohm Grade Count:6
Overview of materials for Nylon 6, 20% Mineral Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 20% Mineral Filled". Specific grades with primary filler content between 15% and 24% are includ..
Surface Resistance 1.00e+10 - 1.00e+15 ohm
1.00e+10 - 1.00e+15 ohm
Average value: 2.21e+14 ohm Grade Count:5
Overview of materials for Nylon 612, Unreinforced
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 612, Unreinforced". Each property range of values reported is minimum and maximum values of approp..
Surface Resistance >= 1.00e+10 ohm
>= 1.00e+10 ohm
Lehmann & Voss LUVOCOM® 3-8266 Polyamide 6, unreinforced
Applications: Automotive industry, textile machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteristics.Reduce..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Solvay TECHNYL® C 216 V30 PA6, 30% glass fiber, Conditioned
Description: Polyamide PA6, reinforced with 30 % of glass fiber, for injection molding.Available in: Asia Pacific and Latin AmericaProduct Applications: It has good mechanical properties, it is used..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Solvay TECHNYLSTARâ„¢ S 216 V30 PA6, 30% glass filled, Conditioned
Description: TECHNYL STAR TM Polyamide, reinforced with 30% of glass fiber, for injection molding. Characterized by a high fluidity of the melt.Available in: Asia Pacific, Europe and North AmericaPr..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
DIN 53482
Schwartz Technical Plastics LAMIGAMID® 310 Cast Polyamide 6, Conditioned
Application: sheaves, wheels, rollers, mandrell segments, coupling parts, vibrator parts etc.Information provided by Schwartz Technical Plastics GmbH
Surface Resistance 1.00e+10 - 1.00e+12 ohm
1.00e+10 - 1.00e+12 ohm
ASTM D257
SABIC Innovative Plastics LNP STAT-LOY KX01002 Acetal Copolymer (Europe-Africa-Middle East)
LNP* Stat-Loy* KX01002 is a compound based on Acetal Copolymer resin containing Antistat. Added features include: Permanent Anti-Static.
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6000 GV 25 HWUVCP 25% Glass Fiber Nylon 6, UV Stabilized, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6000 GV 30 HWCP 30% Glass Fiber Nylon 6, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6000 HWUVCP Nylon 6, UV Stabilized, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6000 SUVCP Nylon 6, Finely Crystalline, UV Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6600 GV 35 HWCP 35% Glass Fiber Nylon 66, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
ISO 3915
CP-Polymer-Technik Wellamid® 6600 HWS Nylon 66, Finely Crystalline, Heat Stabilized, Conditioned
Information provided by CP-Polymer-Technik GmbH & Co. KG
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
BASF Gusspolyamid® Nylon 6 (At 50% RH)
Processed by anionic polymerization of caprolactam in the presence of a catalyst and activator. Uses include semi-finished products and containers (e.g. heating oil tanks).Data was collected by ISO..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Akro-Plastic Akromid® A3 GF 40 (1258) PA 6.6 Conditioned, 40% Glass Filled
AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
BASF Ultramid® A34 01 PA66 (Conditioned)
Ultramid A34 01 is an intermediate visosity, PA66 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or ..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
BASF Ultramid® B3UG4 BK 23215 20% Glass Filled PA66 FR (Conditioned)
Description: Halogen-free and phosphorus free flame retardant injection-molding grade with outstanding free-flow properties, good electrical properties and low smoke density; resistant to glow wire..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
BASF Ultramid® B3WGM 24 HP BK 23210 10/20% Glass/Mineral Filled PA6-1 (Conditioned)
Description: 20% mineral-filled and 10% glass-fiber reinforced injection-molding grade with outstanding flowability for technical parts with medium rigidity and high dimensional stability, e.g. for..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
BASF Ultramid® B3ZG3 15% Glass Filled PA6 (Conditioned)
Ultramid B3ZG3 is an impact-modified, 15% glass fiber reinforced injection molding PA6 grade.
Surface Resistance >= 1.00e+10 ohm
>= 1.00e+10 ohm
IEC 60093
BASF Ultramid® C3U BK 23079 PA6/66 FR (Conditioned)
Description: Injection-molding grade with improved flame retardance (free from halogens and phosphorus), used e.g. for impact resistant electrically insulating parts such as contact bases and plug c..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Akro-Plastic Akromid® A3 GF 20 (2419) PA 6.6 Conditioned, 20% Glass Filled
AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Akro-Plastic Akromid® B3 GF 40 (2474) PA 6 Conditioned, 40% Glass Filled
AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..
Surface Resistance 1.00e+10 - 3.16e+10 ohm
1.00e+10 - 3.16e+10 ohm
IS 3396-1979
Amity Thermosets ATR 126 Phenolic Molding Organic Filler, Injection Molded
Characteristics:Ammonia freeGood mouldabilityGood mechanical strengthGood electrical insulationGood surface finishMedium thermal stability Color-black, brownSoft flow Applications:Telecommunication ..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
EMS-Grivory Grivory® XE 4208 black 9992 PA612-I
Product description: Grilamid XE 4208 black 9992 is a semiflexible high viscosity, plasticized, high impact and highly heat resistant polyamide 612 (PA612) extrusion grade. Unique properties of Gril..
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
BASF Ultramid® B3GM35 Q611 15/25% Glass/Mineral Filled PA6 (Conditioned)
Ultramid B3GM35 Q611 is a 40% combined glass-fiber and mineral reinforced injection molding PA6 grade.
Copyright © lookpolymers.com All Rights Reserved