Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 6.10 GPa | 885 ksi | 1mm/min; ISO 527-2/1A |
Celanese Celanex® 2302 GV1/15 PBT, 15% Glass Reinforced
(Unverified Data**) Chemical abbreviation according to ISO 1043-1: PBT15% glass fiber reinforced, high glossInformation provided by Celanese |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1mm/min; ISO 527-2/1A |
Celanese Celanex® 5202 PBT, 15% Glass Reinforced
(Unverified Data**) Celanex 5202 is a 15% glass filled polyester that features improved surface gloss and has an excellent balance of mechanical properties, processability, and color stability under heat and UV exposur.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ASTM D638 |
Solvay Specialty Polymers Amodel® AP-9240 NL Polyphthalamide (PPA) Resin, 40% Mineral Filled, Dry as Molded
( AMODEL AP-9240 NL resin is a 40% mineral-filled, impact-modified polyphthalamide (PPA). It was designed to provide a smooth molded surface suitable for many decorative applications. This resin offer.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527 |
Nilit FRIANYL B63 FK 1020 Nylon 6 for injection molding, 10% glass fiber and 20% glass ball reinforced Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ASTM D638 |
NOVA Chemicals Dylark® 378P20 High Performance Glass Filled Styrenic Very high modulus, High heat resistance, Excellent flow characteristics, Excellent adhesion to urethaneApplications: Instrument panel substrates, consoles, Cluster housing, interior trimInjection Sp.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527 |
Grupo Repol Dinalon® B1S25 G10B20 PA6 10% Glass Fiber, 20% Glass Beads Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® AKV 30 HR H2.0 900116 Nylon 66, 30% Glass Fiber PA 66, injection molding grade, 30% glass fibers, hydrolysis stabilized, good heat-ageing resistance |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® AKV 30 HR H2.0 901510 Nylon 66, 30% Glass Fiber PA 66, injection molding grade, 30% glass fibers, hydrolysis stabilized, good heat-ageing resistance |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | d.a.m.; ISO 527-1, -2; 1 mm/min |
Lanxess Durethan® BKV 20 FN20 000000 Nylon 6, Glass Fiber Reinforced, Flame Retardant PA 6, 20% glass fibers, injection molding, halogen-free flame retardantInformation provided by LANXESS. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO R 527 |
Solvay TECHNYL® C 216 V15 PA6, 15% glass filled, Eh 0 Description: TECHNYL C 216 V15 is a polyamide 6 with 15% of glass fiber.Colors: it is marketed in the black color and natural.Available in: Asia Pacific and EuropeMain Properties: Dimensional stabil.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP DF004ER PC (Europe-Africa-Middle East) LNP* Thermocomp* DF004ER is a compound based on Polycarbonate resin containing Glass Fiber. Added features of this material include: Easy Molding, Mold Release. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 50 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP DF004RXP PC LNP* Thermocomp* DF004RXP is a compound based on Polycarbonate resin containing 20% Glass Fiber. Some light color grades may have lower impact data than natural and black. Added features include: .. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1mm/min; ISO 527 |
Teijin Multilon DN-3520F Filler Reinforced Type, Halogen-Free Flame Resistant PC/ABS Polymer Alloy Halogen-free flame retardant PC/ABS polymer alloy, and is also antimony-free. It has improved stiffness through the addition of 20 % filler. Improved stiffness and high flowability realizes a thin w.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP ZFM3314 PPE (Europe-Africa-Middle East) glas, mineral filled PPE |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1mm/min, 4mm injection molded, unannealed; ISO 527-2 |
Styron EMERGEâ„¢ 5302 Acrylonitrile Butadiene Styrene (ABS) EMERGEâ„¢ ABS 5302 is a black, 20% glass-filled ABS which is suitable for use in a wide variety of internal structural component applications in the information technology market. Applications: .. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ASTM-D790 |
Polyram RamShine PV102 ABS, General Purpose General purpose ABS for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Modulus | 6.10 GPa @Temperature 160 °C |
885 ksi @Temperature 320 °F |
ISO 527-1/-2 |
DSM Stanyl® OCD2300 BLK PA46-GF50 50% Glass Reinforced, Heat Stabilized |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® BK-50 PA6-GB50 Information provided by EMS Grivory |
|||
Tensile Modulus | 6.10 GPa @Temperature 160 °C |
885 ksi @Temperature 320 °F |
ISO 527-1/-2 |
DSM Stanyl® TE200F8 PA46-GF40 40% Glass Reinforced, Heat Stabilized, for E&E applications |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527-1/-2 |
DSM Stanyl® TW200F3 Nylon 46-15% Glass Reinforced (European Grade) (Dry) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527 |
CP-Polymer-Technik Wellamid® 6600 GV 15 HWCP 15% Glass Fiber Nylon 66, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527-1/-2 |
DSM Stanyl® TW241F3 Nylon 46-15% Glass Reinforced, Heat Stabilized, Lubricated (Asian Grade) (Dry) Stanyl is a high performance polyamide providing performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temperature.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® HTN 54G15HSLR BK031 Polyphthalamide (PPA)
(Unverified Data**) 15% Glass Reinforced Toughened PPA High Performance Polyamide Zytel HTN54G15HSLR BK031 is a 15% glass reinforced toughened heat stabilized hydrolysis resistant high performance polyamide resin. It i.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 50mm/min; ISO 527-2/1A |
Celanese CELANEX 2302 GV1/15 PBT, 15% Glass Reinforced Chemical abbreviation according to ISO 1043-1: PBTInformation provided by Celanese |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 1mm/min; ISO 527 |
Teijin Panlite® G-3420R Glass Fiber Reinforced Polycarbonate Resin GF 20% reinforced and mold release grade, meeting UL 94 V-2.Applications:Mechanical, electric and electronic components that need mechanical property e.g., stiffnessPrecision machinery components th.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | same value from ASTM and ISO test. |
BASF Capron® GR15 15% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron GR15 is a 15% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aesthetics. It is also.. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | ISO 527-1/-2 |
DSM Stanyl® TW200F3 (DAM) Nylon 46 15% Glass Reinforced, Heat Stabilized (North America) Information provided by DSM Engineering Plastics. |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | 50%RH; ISO 527-1/-2 |
DuPont Performance Polymers Zytel® 70G25HSLR NC010 Nylon 66
(Unverified Data**) 25% Glass Reinforced Heat Stabilized Hydrolysis Resistant Polyamide 66 Zytel 70G25HSLR NC010 is a 25% glass fiber reinforced heat stabilized hydrolysis resistant polyamide 66 resin for injection mol.. |
|||
Tensile Modulus | 6.10 GPa @Temperature 80.0 °C |
885 ksi @Temperature 176 °F |
ISO 527-1, -2 |
Celanese Celstran® +PP-GF45-05X551/1X PP, 45% Glass Reinforced Material code according to ISO 1043-1: PPInformation provided by Celanese |
|||
Tensile Modulus | 6.10 GPa | 885 ksi | Conditioned; ISO 527-1/-2 |
Lanxess Durethan® BKV 30 W1 000000 Nylon 6, 30% Glass Fiber PA 6, Injection molding grade, 30% glass fibers, weather stabilized |