- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Yield = 87000 psi
Polymer Property : Tensile Strength, Yield = 87000 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4028 Martensitic Stainless Steel Moderate corrosion resistant stainless steel hardenable up to 1000N/mm2. Re-sulphurized steel improves machining properties.Applications: ShaftsKnivesFastenersSurgical applicationsDomestic applicat.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | Proof Stress |
| Kennametal Stellite Denertia™ C14 Cobalt Chromium Dental Alloy Denertia™ C14 is a cobalt chromium base-metal casting alloy for the manufacture of removable partial dentures and bridgework. It conforms to the following International Standards: EN 1641 §.. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
|
| Haynes 188 alloy, 40% cold reduction, 3.2 mm thick sheet, 1120°C for 5 minutes Excellent high temperature strength and very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. Readily fabr.. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
|
| Haynes 214® alloy, 20% cold reduction, 1095°C (2000°F) for 5 minutes Intended principally for use at temperatures of 955°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh .. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
|
| Haynes 214® alloy, 50% cold reduction, 1095°C (2000°F) for 5 minutes Intended principally for use at temperatures of 955°C and above, exhibits resistance to oxidation that exceeds virtually all conventional heat-resistant wrought alloys. Applications include mesh .. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
|
| Haynes Ultimet® alloy, 19.1 mm thick plate, SMAW weld Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | Proof Stress |
| Kennametal Stellite Denertia™ C4 Cobalt Chromium Dental Alloy Denertia™ C4 is a cobalt chromium base-metal casting alloy for the manufacture of removable partial dentures and bridgework.It conforms to the following International Standards: EN 1641 §4... |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
Precipitation Hardened. Value at room temperature |
| Special Metals NIMONIC® Alloy 81 A precipitation-hardenable nickel-chromium alloy with enhanced resistance to high-temperature corrosion. The excellent hot-corrosion resistance of the alloy results from its high chromium content o.. |
|||
| Tensile Strength, Yield | >= 600 MPa | >= 87000 psi | |
| SSAB Tunnplat Domex® 600MC HSLA Steel HSLA SteelCharacteristics: Domex® MC grade steels conform to the provisions of EN 10149-2 standard and often have better properties.Property data is for hot-rolled steel..Domex® is the brand n.. |
|||
| Tensile Strength, Yield | >= 600 MPa @Strain 0.200 % |
>= 87000 psi @Strain 0.200 % |
|
| Schmolz + Bickenbach UGICHROM 4021 Martensitic Chrome Plated Bar Description: Ugichrom combines the high efficiency of micro-fissuring chromium plating with the technology of Ugitech’s most advanced gradesAdvantages: Zero defects guarantee; Low friction coef.. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
Typical |
| TIMET TIMETAL® 230 Titanium Alloy (Ti-2.5Cu); STA Cold Formable Medium-Strength AlloyFeatures: This binary, age hardening alloy combines the easy formability and weldability of commercially pure titanium with improved mechanical properties, particu.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | 0° |
| Hexcel® HexPly® ES 84 120°C Curing Epoxy Matrix, Aramid Balanced fabric 175 g/m2 Information provided by HexCel |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | 0° |
| Hexcel® HexPly® ES 84 120°C Curing Epoxy Matrix, E-glass Balanced fabric 390 g/m2 Information provided by HexCel |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | 0º |
| Hexcel® HexPly® M34 75°C (167°F) Curing Epoxy Matrix, E-glass Balanced Fabric 300 g/m2 Information provided by HexCel |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | 100% elongation; ASTM D412 |
| Lubrizol Estane® 58070 Thermoplastic Polyurethane Features: Outstanding resiliency, fuel resistance and low temperature flexibility.Uses: Hose and Tube, Injection Molding, Fabric Coating and Wire/CableAvailable in Americas, Europe, Middle East, Afr.. |
|||
| Tensile Strength, Yield | >= 600 MPa | >= 87000 psi | |
| ThyssenKrupp PAS 600 Structural Steel for Cold Forming This Material Specification applies to plates made of low carbon high strength steels with minimum yield strength values between 315 and 700 MPa1) in the thermo mechanically rolled delivery conditio.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | |
| Universal Wire Works 117 Nickel Alloy Welding Wire Alloy 117 is a nickel alloy electrode for welding nickel-chromium-cobalt-molybdenum alloys (UNS # N06617). This alloy electrode provides optimum strength and oxidation resistance above 1500 degrees .. |
|||
| Tensile Strength, Yield | 600 MPa @Temperature 75.0 °C |
87000 psi @Temperature 167 °F |
90º, Wet; EN2561 |
| Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, 45% 46280 Fiber Information provided by HexCel |
|||
| Tensile Strength, Yield | 600 MPa @Temperature 100 °C |
87000 psi @Temperature 212 °F |
90º, Wet; EN2561 |
| Hexcel® HexPly® M12 135°C Curing Epoxy Matrix, 45% 46280 Fiber Information provided by HexCel |
|||
| Tensile Strength, Yield | >= 600 MPa | >= 87000 psi | 0.2% offset |
| Eagle Brass 425 Tin Brass 2%, Extra Spring Alloy C425 is a low zinc-containing alloy with good combination of tensile strength, electrical conductivity, formability and corrosion resistance. Applications include electrical springs, connector.. |
|||
| Tensile Strength, Yield | >= 600 MPa @Strain 0.200 % |
>= 87000 psi @Strain 0.200 % |
|
| CLAL-MSX NICLAFOR® 1000 TD3 Quenched/Cold Rolled, Drawn Copper Alloy Finished parts can be produced with: reduction in sections, high mechanical properties even at high temperature, high spring properties, high conductivity, good resistance to corrosion, low permeabi.. |
|||
| Tensile Strength, Yield | >= 600 MPa @Strain 0.200 % |
>= 87000 psi @Strain 0.200 % |
|
| CLAL-MSX NICLAFOR® 1000 TD4 Quenched/Cold Rolled, Rolled Copper Alloy Finished parts can be produced with: reduction in sections, high mechanical properties even at high temperature, high spring properties, high conductivity, good resistance to corrosion, low permeabi.. |
|||
| Tensile Strength, Yield | >= 600 MPa @Strain 0.200 % |
>= 87000 psi @Strain 0.200 % |
|
| CLAL-MSX NICLAL 1800 H14 4/4 Hard Copper Alloy, Free Cutting Nickel-Silver Main Characteristics: Good corrosion resistanceHigh mechanical propertiesTypical Applications:Parts subject to high stressHigh quality fastenersInformation provided by CLAL-MSX |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 %, Temperature -196 °C |
87000 psi @Strain 0.200 %, Temperature -321 °F |
Longitudinal |
| Carpenter 20Cb-3® Stainless Steel Data provided by Carpenter Technology Corporation.20Cb-3® is an austenitic stainless steel possessing excellent resistance to hot sulfuric acid and many other aggressive environments which would re.. |
|||
| Tensile Strength, Yield | >= 600 MPa @Diameter 101 - 210 mm |
>= 87000 psi @Diameter 3.98 - 8.27 in |
Re., un-machined |
| Assab Steels 709M Machinery Steel ASSAB 709M is an alloyed machinery steel with high strength in small and medium sizes. As standard ASSAB 705M is supplied tough hardened requiring no further heat treatment. It can be oil hardened t.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | Rp 0.2 |
| Arcam ASTM F-75 Cobalt Chrome Alloy ASTM F-75 Cobalt Chromium alloys are widely used in orthopedic implants such as cemented total hip or knee arthroplasty as well as in metal-on-metal bearings in total hip arthroplasty. The alloys fe.. |
|||
| Tensile Strength, Yield | 600 - 700 MPa | 87000 - 102000 psi | |
| ArcelorMittal Complex Phase Steel 800 Y600 Very high strength steel, Cold Rolled Steel Available in the following: uncoated (HCT780C), electrogalvanized (HCT780C+ZE) and Extragal®/Galvannealed (HCT780+Z)Description: The Complex Phase family of steels supplements ArcelorMittal's VHSS .. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 % |
87000 psi @Strain 0.200 % |
|
| Carpenter Custom 630 (17-Cr-4Ni) Precipitation Hardening Stainless Steel, Condition H 1150M (Heated 760°C/2hr/AC then 621°C/4hr/AC) Data provided by Carpenter Technology Corporation.Custom 630 (17Cr-4Ni) is a martensitic precipitation/age-hardening stainless steel offering high strength and hardness along with excellent corrosio.. |
|||
| Tensile Strength, Yield | 600 MPa | 87000 psi | |
| Plansee DENSIMET® D185 Tungsten-Nickel-Iron Alloy Characteristics:Easy processingHigh densityPrecision forming and machiningHigh ductilityHigh strength100 % impermeableTypical Applications:Balancing weights in motors and drive componentsVibration d.. |
|||
| Tensile Strength, Yield | 600 MPa @Strain 0.200 %, Temperature 315 °C |
87000 psi @Strain 0.200 %, Temperature 599 °F |
|
| Haynes 242® alloy, hot rolled plate, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good thermal.. |
|||
Copyright © lookpolymers.com All Rights Reserved