Polymer Property : Charpy Impact Unnotched = 0.800 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact Unnotched	0.800 J/cm² @Temperature -40.0 °C	3.81 ft-lb/in² @Temperature -40.0 °F	DIN 53453
Nilit FRIANYL B63 CU90 Nylon 6.6 for injection molding, 90% copper filled Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact Unnotched	0.800 - 1.20 J/cm² @Temperature 23.0 °C	3.81 - 5.71 ft-lb/in² @Temperature 73.4 °F	Injection and Compression; ISO 179/ 1eU
Raschig Group 3535 Epoxy Glass fiber-reinforced epoxy molding compound. Good mechanical strength, very good electrical isolation properties adn dimensional stability even at high temperatures. Form: Low dust granulate pack..
Charpy Impact Unnotched	0.800 - 1.40 J/cm²	3.81 - 6.66 ft-lb/in²	Injection; ISO 179/1eU
Raschig Group MELOPAS® 2010 MF Melamine Organically and inorganically filled Melamine molding compound. Excellent surface hardness, good mechanical strength, good electrical properties. This product meets the allowed upper limits for heav..
Charpy Impact Unnotched	0.800 - 1.10 J/cm²	3.81 - 5.23 ft-lb/in²	Injection; ISO 179/1eU
Raschig Group RALUPOL® 4802 UP Polyester Glass-fiber reinforced polyester molding compound. Low mold shrinkage and post-shrinkage, good electrical values, excellent heat resistance, outstanding pourability. This product meets the allowed u..
Charpy Impact Unnotched	>= 0.800 J/cm²	>= 3.81 ft-lb/in²	ISO 179
Perstorp Compounds 371 Urea-Formaldehyde w/ cellulose filler Information provided by Perstorp Compounds Inc.
Charpy Impact Unnotched	0.800 - 12.0 J/cm²	3.81 - 57.1 ft-lb/in²	Average value: 4.03 J/cm² Grade Count:95
Overview of materials for Polyetheretherketone, Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, Carbon Fiber Filled". Each property range of values reported is minimum and maximu..
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO Data
Americas Styrenics Styron® 663 Polystyrene (discontinued **) STYRON® 663 general purpose polystyrene resin is an additive free resin with excellent strength, clarity, and high heat resistance. When used unmodified for the manufacture of food contact articles..
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO Data
Americas Styrenics Styron® 685P Polystyrene (discontinued **) STYRON® 685P general purpose polystyrene resin is a high heat resin with good strength, moldability/processability, and excellent clarity. This resin is typically used in consumer electronic applic..
Charpy Impact Unnotched	0.800 J/cm² @Temperature 23.0 °C	3.81 ft-lb/in² @Temperature 73.4 °F	DIN 53453
LATI LASTIROL R G/30 30% Glass Fiber Reinforced Polystyrene (PS) (discontinued **) Description: Lastirol thermoplastics are polystyrene (PS) products. The Lastirols feature excellent dimensional stability, good flowability, and can be molded without any particular problem. Glass f..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Ineos ABS Lustran® 1460, Injection Grade (discontinued **) Injection molding grade, increased heat and impact resistance, medium gloss.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acqui..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Ineos ABS Lustran® 2863 (discontinued **) Special grade for smart cards.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Ineos ABS Lustran® QE 1088 FC, Injection Grade (discontinued **) Injection molding grade, high impact, medium gloss.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholdi..
Charpy Impact Unnotched	0.800 - 1.10 J/cm²	3.81 - 5.23 ft-lb/in²	Injection; ISO 179/1eU
Raschig Group RALUPOL® 802 UP Polyester Glass-fiber reinforced polyester molding compound. Low molding shrinkage and post-shrinkage, good electrical values, good mechanical strength, good heat resistance. This product meets the allowed up..
Charpy Impact Unnotched	0.800 - 1.10 J/cm²	3.81 - 5.23 ft-lb/in²	Injection; ISO 179/1eU
Raschig Group RALUPOL® 804 UP Polyester Glass-fiber reinforced polyester molding compound. Low molding shrinkage and post-shrinkage, good electrical values, good mechanical strength. This product meets the allowed upper limits for heavy m..
Charpy Impact Unnotched	0.800 - 999.9 J/cm² @Temperature -30.0 - -20.0 °C	3.81 - 4759 ft-lb/in² @Temperature -22.0 - -4.00 °F	Average value: 0.800 J/cm² Grade Count:2
Overview of materials for Polycarbonate, Glass Fiber Filled, Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Glass Fiber Filled, Flame Retardant". Each property range of values reported is minimum a..
Charpy Impact Unnotched	0.800 - 3.00 J/cm²	3.81 - 14.3 ft-lb/in²	Average value: 2.27 J/cm² Grade Count:3
Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Mica Filled". Each property range of values reported is minimum and maxi..
Charpy Impact Unnotched	0.800 J/cm² @Temperature 23.0 °C	3.81 ft-lb/in² @Temperature 73.4 °F	ISO 179-1/2 eU
Hexion Bakelite™ PF 84 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets, High Mechanical Strength & Phenolic molding compound, organically filled, reinforced with cotton fibers, increased notched impact strength, standardized molding compound.Application areas: Contact support power switch, moldin..
Charpy Impact Unnotched	0.800 J/cmÂ²	3.81 ft-lb/inÂ²	edgewise; ISO 179 1eU
Lehmann & Voss LUVOCOMÂ® 65-8285 PP-copolymer, with carbon fiber Applications: Office communication.High-stiff parts with low creep.Electrically conductive, suitable for continuous discharging of statically generated electricity.Low warpage.Information provided b..
Charpy Impact Unnotched	0.800 - 1.00 J/cm²	3.81 - 4.76 ft-lb/in²	ISO 179
Vyncolit 4221 XB Novolac Phenolic Mineral and organic filled phenolic molding compound with good mechanical properties.Information provided by Vyncolit, a Sumitomo Bak Group
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO 179-1
Vyncolit X655/1 Glass Fiber and Mineral Filled Novolac Phenolic Novolac resin based, glass fiber and mineral filled. High dimensional stability and excellent chemical resistance at high temperatures in hydraulic brake fluids. Used in particular in the ABS system..
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO 179/1eU
Total PSC 1340 Crystal Polystyrene 1340 is a high molecular weight crystal polystyrene which allows maximum dilution rates with high impact polystyrene grades such as LACQRENE® 7240. In dilution, LACQRENE® 1340 gives excellent pro..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Covestro Apec® HT KU 1-9350 High-Heat Polycarbonate Transparent and opaque shades possible.Applications: Medical sector: superheated steam sterilization.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Ba..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Covestro Apec® HT KU 1-9354 High-Heat Polycarbonate Only opaque colors available, flame retardant.Applications: Lighting, electrical parts.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and off..
Charpy Impact Unnotched	0.800 J/cm² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F
Covestro Apec® HT KU 1-9357/2 High-Heat Polycarbonate, 20% Glass Fiber Only opaque colors available, with 20% glass fiber reinforcement, flame retardant.Applications: Lighting, electrical parts.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience..
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO 179/1eU
Total Lacqrene® 1160(AS) Crystal Polystyrene (discontinued **) LACQRENE® 1160 is a high resistance, high molecular weight crystal polystyrene mainly for the extrusion industry. It is particularly useful in the production of thick sheet by direct gassing, wher..
Charpy Impact Unnotched	0.800 J/cm² - NB	3.81 ft-lb/in² - NB	Average value: 10.6 J/cm² Grade Count:198
Overview of materials for Nylon 6, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Unreinforced". Each property range of values reported is minimum and maximum values of appropri..
Charpy Impact Unnotched	0.800 - 0.800 J/cm² @Temperature -20.0 - -20.0 °C	3.81 - 3.81 ft-lb/in² @Temperature -4.00 - -4.00 °F	Average value: 0.800 J/cm² Grade Count:1
Overview of materials for Polypropylene with 40% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Mica Filler". Specific grades with primary filler content between 35% and 44% are..