- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nilit FRIANYL B63 CU90 Nylon 6.6 for injection molding, 90% copper filled
Nilit FRIANYL B63 CU90 Nylon 6.6 for injection molding, 90% copper filled
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 |
| Manufacturer | Nilit (formerly Frisetta Polymer) |
| Trade Name | FRIANYL |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Nilit FRIANYL B63 CU90 Nylon 6.6 for injection molding, 90% copper filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 5.12 g/cc | 0.185 lb/in³ | ISO 1183 |
| Water Absorption | 0.30 - 0.60 % | 0.30 - 0.60 % | ISO 62 |
| Water Absorption at Saturation | 2.0 - 3.0 % | 2.0 - 3.0 % | ISO 62 |
| Viscosity Measurement | 145 | 145 | Viscosity index; ISO 307 |
| Linear Mold Shrinkage | 0.0020 - 0.0070 cm/cm | 0.0020 - 0.0070 in/in | FRISETTA Test Method |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 125 MPa | 18100 psi | ISO 2039-1 |
| Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO 527 |
| Elongation at Break | 16 % | 16 % | ISO 527 |
| Tensile Modulus | 1.40 GPa | 203 ksi | ISO 527 |
| Flexural Strength | 34.0 MPa | 4930 psi | ISO 178 |
| Flexural Modulus | 4.30 GPa | 624 ksi | ISO 178 |
| Charpy Impact Unnotched | 1.90 J/cm² | 9.04 ft-lb/in² | DIN 53453 |
| 2.00 J/cm² | 9.52 ft-lb/in² | ISO 179/1eU | |
| 0.800 J/cm² @Temperature -40.0 °C |
3.81 ft-lb/in² @Temperature -40.0 °F |
DIN 53453 | |
| 1.50 J/cm² @Temperature -30.0 °C |
7.14 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179/1eA |
| 0.500 J/cm² | 2.38 ft-lb/in² | DIN 53453 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 221 °C | 430 °F | ISO 3146 DSC |
| Maximum Service Temperature, Air | 180 °C | 356 °F | Continuous; FRISETTA Test Method |
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 215 °C | 419 °F | ISO 75 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+9 ohm-cm | 1.00e+9 ohm-cm | IEC 93 |
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz |
0.020 @Frequency 1e+6 Hz |
IEC 250 |
Users viewing this material also viewed the following:
- Oxford Polymers Oxnilon 66-ST-14GF 14% Glass Fiber Reinforced, Impact Modified Nylon 66 for Injection Molding
- Dielectric Polymers NT-5511-2 Masking Tape (discontinued **)
- NOVA Chemicals Sclair® 8107G UV8D Butene LLDPE Rotational Molding Resin
- Kazanorgsintez PC-075A Polycarbonate
- Karina 550D48/1-A-IS-BZ Black PVC Compound
- SABIC Innovative Plastics NORYL WCD825 PPE-TPE (Asia Pacific)
- TIMET TIMETAL® 829 (Ti-5.5Al-3.5Sn-3Zr-1Nb-0.25Mo-0.3Si) Titanium Alloy
- Cytec Thornel® P-120S 2K Carbon Fiber, Pitch Precursor
- Denka MALECCA K-510 ABS
- Arlon 49576R015 0.015" (0.381 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved