Polymer Property : Tensile Stress = 2.40 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Stress	2.40 MPa @Strain 100 %	348 psi @Strain 100 %	ISO 37
PolyOne OnFlex™ S EF 70A-3S1975 Thermoplastic Elastomer (TPE) OnFlex™-S EF thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver good mechanical properties together with excell..
Tensile Stress	2.40 MPa @Strain 100 %	348 psi @Strain 100 %	ISO 37
PolyOne OnFlex™ S EH 70A-3S7004 Thermoplastic Elastomer (TPE) OnFlex™-S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to t..
Tensile Stress	2.40 MPa @Strain 100 %	348 psi @Strain 100 %	ISO 37
PolyOne OnFlex™ S KA 60A-3S1769 Thermoplastic Elastomer (TPE) OnFlex™-S KA thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide p..
Tensile Stress	2.40 MPa @Strain 100 %	348 psi @Strain 100 %	ASTM D412
Polymax® Maxelast® F7860 TPE, Fire Retardant Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Auto PartsSealsWire & Cable ElectronicsInformation from Alliance Polymers & Services, Distributor of Nantong Elastome..
Tensile Stress	2.40 MPa @Strain 300 %	348 psi @Strain 300 %	ASTM D412
Polymax® Maxelast® P2850 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti..
Tensile Stress	2.40 MPa @Strain 5.00 %, Temperature 23.0 °C	348 psi @Strain 5.00 %, Temperature 73.4 °F	ASTM D638
DuPont Performance Polymers Hytrel® 4069 TPC-ET (Unverified Data**) Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection..
Tensile Stress	2.40 MPa @Strain 300 %	348 psi @Strain 300 %	ASTM D412
Polymax® Maxelast® P1750 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti..
Tensile Stress	2.40 MPa @Strain 5.00 %	348 psi @Strain 5.00 %	ISO 527-1/-2
DuPont Performance Polymers Hytrel® 4053FG NC010 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 5.00 %, Temperature 23.0 °C	348 psi @Strain 5.00 %, Temperature 73.4 °F	ISO 527 (1BA bar)
DuPont Performance Polymers Hytrel® 4053FG TPC-ET (Unverified Data**) Hytrel® 4053FG is a low modulus high performance thermoplastic elastomer with food compliance specificity. It is suitable for extrusion and injection molding processes.Information provided by DuPon..
Tensile Stress	2.40 MPa @Strain 5.00 %	348 psi @Strain 5.00 %	ISO 527-1/-2
DuPont Performance Polymers Hytrel® 4056 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester ElastomerInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 103.36 %, Temperature 120 °C	348 psi @Strain 103.36 %, Temperature 248 °F	TPE; ISO 11403-1 -2
DuPont Performance Polymers Hytrel® 4056 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester ElastomerInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 5.00 %	348 psi @Strain 5.00 %	ISO 527-1/-2
DuPont Performance Polymers Hytrel® 4068FG Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 5.00 %	348 psi @Strain 5.00 %	ISO 527-1/-2
DuPont Performance Polymers Hytrel® 4056P Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester Elastomer in Powder FormInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 5.00 %	348 psi @Strain 5.00 %	ISO 527-1/-2
DuPont Performance Polymers Hytrel® 4068 Polyester Elastomer TPC-ET (Unverified Data**) 40 Shore D High Performance Polyester Elastomer with Non-discoloring StabilizerInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 124.88 %, Temperature 200 °C	348 psi @Strain 124.88 %, Temperature 392 °F	TPE; ISO 11403-1 -2
DuPont Performance Polymers Hytrel® HTR8163HVBK Polyester Elastomer TPC-ET (Unverified Data**) 65 Shore D Polyester Elastomer with Heat Ageing Protection Developed for ExtrusionInformation provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 0.360 %, Time 3.60e+7 sec	348 psi @Strain 0.360 %, Time 10000 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Minlon® 73M30 NC010 Nylon 6 (Unverified Data**) 30% Mineral Reinforced Polyamide 6 Minlon 73M30 NC010 is a 30% mineral reinforced heat stabilized polyamide 6 resin for injection molding. It has isotropic properties and low warpage.Information pro..
Tensile Stress	2.40 MPa @Strain 0.201 %, Time 3600 sec	348 psi @Strain 0.201 %, Time 1.00 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Minlon® 73M30 NC010 Nylon 6 (Unverified Data**) 30% Mineral Reinforced Polyamide 6 Minlon 73M30 NC010 is a 30% mineral reinforced heat stabilized polyamide 6 resin for injection molding. It has isotropic properties and low warpage.Information pro..
Tensile Stress	2.40 MPa @Strain 0.287 %, Time 360000 sec	348 psi @Strain 0.287 %, Time 100 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Minlon® 73M30 NC010 Nylon 6 (Unverified Data**) 30% Mineral Reinforced Polyamide 6 Minlon 73M30 NC010 is a 30% mineral reinforced heat stabilized polyamide 6 resin for injection molding. It has isotropic properties and low warpage.Information pro..
Tensile Stress	2.40 MPa @Strain 0.324 %, Time 3.60e+6 sec	348 psi @Strain 0.324 %, Time 1000 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Minlon® 73M30 NC010 Nylon 6 (Unverified Data**) 30% Mineral Reinforced Polyamide 6 Minlon 73M30 NC010 is a 30% mineral reinforced heat stabilized polyamide 6 resin for injection molding. It has isotropic properties and low warpage.Information pro..
Tensile Stress	2.40 MPa @Strain 0.244 %, Time 36000 sec	348 psi @Strain 0.244 %, Time 10.0 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Minlon® 73M30 NC010 Nylon 6 (Unverified Data**) 30% Mineral Reinforced Polyamide 6 Minlon 73M30 NC010 is a 30% mineral reinforced heat stabilized polyamide 6 resin for injection molding. It has isotropic properties and low warpage.Information pro..
Tensile Stress	2.40 MPa @Strain 0.444 %, Time 3.60e+6 sec	348 psi @Strain 0.444 %, Time 1000 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Zytel® 103HSL NC010 Nylon 66 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103HSL NC010 is a heat stabilized lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 0.558 %, Time 3.60e+7 sec	348 psi @Strain 0.558 %, Time 10000 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Zytel® 103HSL NC010 Nylon 66 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103HSL NC010 is a heat stabilized lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 0.261 %, Time 36000 sec	348 psi @Strain 0.261 %, Time 10.0 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Zytel® 103HSL NC010 Nylon 66 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103HSL NC010 is a heat stabilized lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 0.340 %, Time 360000 sec	348 psi @Strain 0.340 %, Time 100 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Zytel® 103HSL NC010 Nylon 66 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103HSL NC010 is a heat stabilized lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers
Tensile Stress	2.40 MPa @Strain 0.202 %, Time 3600 sec	348 psi @Strain 0.202 %, Time 1.00 hour	50%RH; isochronous; ISO 11403-1 -2
DuPont Performance Polymers Zytel® 103HSL NC010 Nylon 66 (Unverified Data**) Unreinforced Heat Stabilized Polyamide 66 Zytel 103HSL NC010 is a heat stabilized lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers