Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength = 10200 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength 70.0 - 390 MPa
10200 - 56600 psi
MD
Quadrant Plastic Composites GMTex® Glass-Mat-Reinforced Thermoplastic
Based on GMT, the composite GMTex has been further developed for applications demanding high impact resistance, strength and durability. In the production of these high-performance thermoplastic co..
Tensile Strength 70.0 - 90.0 MPa
10200 - 13100 psi
Injection; ISO 527
Raschig Group DECAL® 666/8/2B Phenolic
Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This product meets the allowe..
Tensile Strength 70.0 - 90.0 MPa
10200 - 13100 psi
Injection and Compression; ISO 527
Raschig Group EPOXIDUR® 3581 S ZC EP Epoxy Molding Compound
Inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. Very good sealing connection on ..
Tensile Strength 70.0 - 90.0 MPa
10200 - 13100 psi
Injection and Compression; ISO 527
Raschig Group EPOXIDUR® 3581 T-1 EP Epoxy, Molded, Glass Fiber Filler
Glass-fiber reinforced and inorganically filled epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. Very ..
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Quadrant EPP Quadrant LSG PSU, Extruded, Unfilled, Polysulfone (ASTM Product Data Sheet)
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Solvay Specialty Polymers Udel® P-1720 Polysulfone (PSU)  (discontinued **)
Udel P-1720 is a flame-retardant grade of polysulfone (PSU) that has a UL94 rating of V-0 at a thickness of 1 mm (0.039"). In general, polysulfone is a tough, rigid, high-strength thermoplastic that..
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Solvay Specialty Polymers Udel® P-1750 MR Polysulfone (PSU)  (Unverified Data**)
Udel P-1750 MR is a lower color grade of polysulfone that contains a mold release which aids part ejection when parts with low draft are injection molded. Polysulfones have long been known for trans..
Tensile Strength 70.0 MPa
10200 psi
DIN 53455
Isoflon PSU Polysulfone
Electrical insulating productsRigidHigh chemical, fire and temperature resistanceInformation provided by Isoflon.
Tensile Strength 70.3 MPa

@Thickness 3.18 mm
10200 psi

@Thickness 0.125 in
ASTM D638
Solvay Specialty Polymers Radel® R-5600 Polyphenylsulfone (PPSU)
Radel® R-5600 is a very high melt flow grade of Radel® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. Radel® resins offer excep..
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Solvay Specialty Polymers Udel® P-1700 LCD Polysulfone (PSU)
Udel® P-1700 LCD polysulfone is especially well suited for the fabrication of porous membranes for filtration applications. The membranes are usually in the form of hollow fibers, but tube, plate..
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Solvay Specialty Polymers Udel® P-1710 Polysulfone (PSU)
Udel® P-1710 polysulfone (PSU) is a tough, rigid, high-strength thermoplastic that is suitable for continuous use up to 300°F (149°C). The resin is resistant to oxidation and hydrolysis and..
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Solvay Specialty Polymers Udel® P-1750 MR Polysulfone (PSU)
Udel® P-1750 MR is a lower color grade of polysulfone that contains a mold release which aids part ejection when parts with low draft are injection molded.Polysulfones have long been known for tr..
Tensile Strength 70.0 MPa

@Temperature 23.0 °C
10200 psi

@Temperature 73.4 °F
DAM; ISO 527
DuPont Performance Polymers Zytel® FR7026V0F BK001 Nylon 66  (Unverified Data**)
Zytel® FR7026V0F BK001 is a flame retardant heat stabilized polyamide 66 resin for injection molding. It does not contain elemental phosphorous, halogens or heavy metals.Information provided by DuP..
Tensile Strength >= 70.0 MPa
>= 10200 psi
IEC 1212-2 5.7
Hippe PF CP 204 Cellulose Paper Reinforced Phenolic Resin - Sheet
Used in electrical and electronic applications. Good stability of electrical properties under high humidity. Also available in cold or hot-punching versions.Information provided by Hippe.
Tensile Strength >= 70.0 MPa
>= 10200 psi
IEC 1212-2 5.7
Hippe SI GC 201 Woven Glass Cloth Reinforced Silicone Resin - Sheet
Used in electrical and electronic applications. Extremely good electrical properties under dry conditions; good properties under humid conditions.Information provided by Hippe.
Tensile Strength >= 70.0 MPa
>= 10200 psi
IEC 1212-2 5.7
Hippe UP GM 201 Woven Glass Mat Reinforced Polyester (unsaturated) Resin - Sheet
Used in mechanical and electrical applications. Good stability of electrical properties under high humidity. Good mechanical properties at moderate temperature.Information provided by Hippe.
Tensile Strength >= 70.0 MPa
>= 10200 psi
IEC 1212-2 5.7
Hippe UP GM 202 Woven Glass Mat Reinforced Polyester (unsaturated) Resin - Sheet
Used in mechanical and electrical applications. Good stability of electrical properties under high humidity. Good mechanical properties at moderate temperature. Flame retardant.Information provid..
Tensile Strength 70.0 MPa

@Strain 10.0 %,
Temperature 0.000 °C
10200 psi

@Strain 10.0 %,
Temperature 32.0 °F
50 mm/min; ISO 527-2
BASF Elastollan R 1000 20% Glass Filled TPUR
Description: Thermoplastic Polyester Polyurethane Elastomers with exceptional properties, very high impact resistance, high modulus with at the same time elasticity, low coefficient of thermal expan..
Tensile Strength 70.0 MPa

@Temperature 80.0 °C
10200 psi

@Temperature 176 °F
ISO 527-1, -2
Celanese Celstran® +PP-GF30-04CN02/10 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Tensile Strength 70.0 MPa

@Temperature 80.0 °C
10200 psi

@Temperature 176 °F
ISO 527-1, -2
Celanese Celstran® PP-GF30-0405 P10/10 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Tensile Strength 70.0 MPa

@Temperature 80.0 °C
10200 psi

@Temperature 176 °F
ISO 527-1, -2
Celanese Celstran® PP-GF30-0455 P10/16 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Tensile Strength 70.0 MPa

@Temperature 80.0 °C
10200 psi

@Temperature 176 °F
ISO 527-1, -2
Celanese Celstran® PP-GF40-0414P10/10 PP, 40% Glass Reinforced
Material code according to ISO 1043-1: PPPP-GF with 40% chemically coupled long glass fibersInformation provided by Celanese
Tensile Strength >= 70.0 MPa
>= 10200 psi
IEC 1212-2 5.7
Hippe UP GM 203 Woven Glass Mat Reinforced Polyester (unsaturated) Resin - Sheet
Used in mechanical and electrical applications. Good stability of electrical properties under high humidity. Good mechanical properties at moderate temperature. Flame retardant. With improved re..
Tensile Strength 70.0 - 90.0 MPa
10200 - 13100 psi
Compression; ISO 527
Raschig Group DECAL® 152CL Phenolic
Glass-fiber and mineral reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This product meet..
Tensile Strength 70.0 - 100 MPa
10200 - 14500 psi
Compression; ISO 527
Raschig Group RALUPOL® 8605 UP Polyester
Glass fiber reinforced polyester molding compound. Resistant to hydrolysis. This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU dire..
Tensile Strength 70.0 - 90.0 MPa
10200 - 13100 psi
Compression; ISO 527
Raschig Group RESINOL® 400 EPF Phenolic
Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and very good mechanical properties. This product meets ..
Tensile Strength 70.0 MPa
10200 psi
DIN 53455
Isoflon PA 6 Polyamide 6
General use for mechanical partsGood heat resistanceEasy to useHigh moisture regainInformation provided by Isoflon.
Tensile Strength 70.0 MPa

@Temperature 80.0 °C
10200 psi

@Temperature 176 °F
ISO 527-1, -2
Celanese Celstran® PP-GF30-0403 P10/10 PP, 30% Glass Reinforced
Material code according to ISO 1043-1: PPInformation provided by Celanese
Tensile Strength 70.0 MPa
10200 psi
ISO R527, 5 mm/min
Lucite International SW Sanitary Ware Acrylic Sheet
Lucite® SW complies with ISO 7823-1 and EN 263. It is approved by the French ARNOR "NF" quality mark.Information provided by Lucite International
Tensile Strength 70.3 MPa
10200 psi
ASTM D638
Quadrant EPP Quadrant PSU Estruded Unfilled Polysulfone (ASTM Product Data Sheet)
Copyright © lookpolymers.com All Rights Reserved