Polymer Property : Melt Flow = 22 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	(Condition L) ASTM D-1238
Multibase Multi-Flex® TPE A 7150 BLK The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Melt Flow	5.0 - 22 g/10 min @Load 6.70 kg, Temperature 337 °C	5.0 - 22 g/10 min @Load 14.8 lb, Temperature 639 °F	ASTM D1238
Polymer Resources PEI-G10 Polyetherimide, 10% Glass Reinforced Polyetherimide, 10% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Poly..
Melt Flow	5.0 - 22 g/10 min @Load 6.70 kg, Temperature 337 °C	5.0 - 22 g/10 min @Load 14.8 lb, Temperature 639 °F	ASTM D1238
Polymer Resources PEI-G20 Polyetherimide, 20% Glass Reinforced Polyetherimide, 20% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Poly..
Melt Flow	5.0 - 22 g/10 min @Load 6.70 kg, Temperature 337 °C	5.0 - 22 g/10 min @Load 14.8 lb, Temperature 639 °F	ASTM D1238
Polymer Resources PEI-G30 Polyetherimide, 30% Glass Reinforced Polyetherimide, 30% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Poly..
Melt Flow	6.0 - 22 g/10 min @Load 6.70 kg, Temperature 337 °C	6.0 - 22 g/10 min @Load 14.8 lb, Temperature 639 °F	ASTM D1238
Polymer Resources PEI-GP1 Polyetherimide, Flame Retardant Polyetherimide, Flame Retardant, High Heat ResistanceProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information..
Melt Flow	10 - 22 g/10 min @Load 0.325 kg, Temperature 270 °C	10 - 22 g/10 min @Load 0.716 lb, Temperature 518 °F
Plastcom SLOVAMID 6 FRC 2 218/1M PA6, flame retardant Packaging, transport, stockingThe product is packed in hermetically closed thick-walled 25 kg PE bags, on a 1.000 kg palette coated in a stretch foil, in big bags with a thick PE foil fixed on a 1.0..
Melt Flow	17 - 22 g/10 min @Load 2.16 kg, Temperature 300 °C	17 - 22 g/10 min @Load 4.76 lb, Temperature 572 °F	ISO 1133
PolyOne Edgetek® ET3500-5002 BK Acrylonitrile Styrene Acrylate + PC (ASA+PC) The Edgetek™ Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for ..
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	ASTM D1238
Polymer Resources PEI-G40 Polyetherimide, 40% Glass Reinforced (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	18 - 22 g/10 min	18 - 22 g/10 min	ASTM D1238
Micropol L20 Low density polyethylene rotational molding powder Has a high gloss finish, and outstanding toughness. Information provided by Micropol Limited
Melt Flow	18 - 22 g/10 min @Load 2.16 kg, Temperature 235 Â°C	18 - 22 g/10 min @Load 4.76 lb, Temperature 455 Â°F	ASTM D1238
Gromax CCP PBT 1100-630S Product Description: PBT unreinforced medium viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce..
Melt Flow	18 - 22 g/10 min @Load 2.16 kg, Temperature 235 Â°C	18 - 22 g/10 min @Load 4.76 lb, Temperature 455 Â°F	ASTM D1238
Gromax PBT 1100-211M Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce..
Melt Flow	18.1 - 22 g/10 min @Load 1.20 kg, Temperature 300 Â°C	18.1 - 22 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
Iran Petrochemical (PCC) PC 1822 Polycarbonate Suitable for injection moldingInformation provided by Iran Petrochemical Commercial Co.
Melt Flow	18 - 22 g/10 min @Load 2.16 kg, Temperature 240 °C	18 - 22 g/10 min @Load 4.76 lb, Temperature 464 °F	ASTM D1238
Samyang Triel® 5722EM Thermoplastics Polyetherester Elastomer, Extrusion Excellent mechanical characteristics, elasticity, thermal resistance and chemical resistance.5722EM is an extrusion grade.Information provided by Samyang.
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	ASTM D1238
Polymer Resources PEI-G10 Polyetherimide, 10% Glass Reinforced (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	ASTM D1238
Polymer Resources PEI-G20 Polyetherimide, 20% Glass Reinforced (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	ASTM D1238
Polymer Resources PEI-G30 Polyetherimide, 30% Glass Reinforced (Unverified Data**) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.
Melt Flow	20 - 22 g/10 min	20 - 22 g/10 min	Cond. O
Ashley Polymers Ashlene® P1051R Polycarbonate A high flow transparent polycarbonate with good impact properties.Data provided by the manufacturer
Melt Flow	20 - 22 g/10 min	20 - 22 g/10 min	Cond. O
Ashley Polymers Ashlene® P1053R Polycarbonate A high flow transparent polycarbonate with good impact properties containing UV stabilizer.Data provided by the manufacturer