Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 10 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
RheTech Products FT7016-01UV Thermoplastic Polyolefin, UV Stabilized, Black
Applications: Bumper coversCladdingsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
Procedure A; ASTM D1238
PolyOne Maxxam™ PPC-10G Nat Polypropylene Copolymer (PP Copolymer)
PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
STN EN ISO 1133
Plastcom SLOVAMID® 6 GF 25 FRC 4 PA6 reinforced with glass fiber, flame retarded
PA 6 for injection molding, reinforced with 25 % glass fiber, flame retarded with halogen free flame retardant. Main features: flammability according to UL 94 3 at 1,6mm, glow wire at 960°C. Applic..
Melt Flow 10 g/10 min

@Load 5.00 kg,
Temperature 190 °C
10 g/10 min

@Load 11.0 lb,
Temperature 374 °F
ASTM D1238
Polimeri Europa Europrene® SOL T 9131 Styrene - Isoprene Block Copolymer
Europrene® SOL T 9131 is a linear block copolymer obtained by anionic polymerization. The polymer is based on styrene and isoprene, where bound styrene content is 15% weight and diblock content is..
Melt Flow 10 - 15 g/10 min
10 - 15 g/10 min
MSZ ISO 1133:1993
Qualchem Danamid AFEM-5 Polyamide 66, 5% MoS2
With MoS2, decreased friction propertiesInformation provided by Qualchem Zrt.
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
SABIC Innovative Plastics Lexan® 943ASR PC
More robust design of standard 900 series flame retardant grade. Internal mold release. UV-stabilized.
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
SABIC Innovative Plastics Lexan® 943X PC Copolymer (Asia Pacific)
Lexan* 943X is a UV stabilized medium flow impact modified injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, low tempera..
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
SABIC Innovative Plastics Lexan® EXL1463T PC Copolymer
Lexan* EXL1463T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade. This resin offers excellent low temperature (-30 C) ductility in combination with medium flow ch..
Melt Flow 10 - 16 g/10 min
10 - 16 g/10 min
ASTM D1238-92
Iran Petrochemical (PCC) Tabriz 6630/1 High Impact Polystyrene  (discontinued **)
Information provided by Iran Petrochemical Commercial Co.
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
SABIC Innovative Plastics Lexan® EXL1414 PC Copolymer (Europe-Africa-Middle East)
Lexan* EXL1414 polycarbonate (PC) siloxane copolymer resin is a medium flow opaque injection molding (IM) grade. This resin offers extreme low temperature (-40 C) ductility in combination with excel..
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
SABIC Innovative Plastics Lexan® EXL9330 PC Copolymer
Opaque PC-Siloxane copolymer with excellent processability. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.
Melt Flow 10 g/10 min

@Load 10.0 kg,
Temperature 220 °C
10 g/10 min

@Load 22.0 lb,
Temperature 428 °F
Ineos ABS Lustran® QE 1455/L2, Injection Grade  (discontinued **)
Injection molding grade, increased heat resistance, medium gloss, UV-stabilized grade.Applications: Automotive: body parts.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005..
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238L
LyondellBasell Sequel® 1718 Engineered Polyolefin
Data provided by Solvay Engineered Polymers.An engineered polyolefin designed for exterior painted automotive applications requiring dimensional stability over a broad temperature range. This mater..
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
LG Chemical KEYFLEX BT GN7142F Ester Type TPE
Description: Extrusion Molding, TPC-ET, Halogen Free Flame Retardant, Low ModulusApplication: Cable & Wire Jackets, Hose & Tubing, SheetInformation provided by LG Chemical
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Global PC-1410 General Purpose Polycarbonate
Information provided by Global Polymers Corporation.
Melt Flow 10 g/10 min
10 g/10 min
Microcell Composite Company CELLIFF® 7000 Polymer Pellets
CELLIFF® special high polymer materials are mixed for high degrees of hardness and tenacity. For producing stiff, light weight foaming boards which are tenacious and durable. The foam surface can..
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
IRPC Polimaxx Polene 2300NC Polypropylene Block Copolymer
CHARACTERISTICS: MEDIUM FLOW, GOOD IMPACTAPPLICATIONS: INJECTION MOLDING FOR AUTOPARTS, ELECTRICAL APPLIANCES, FURNITURES, CRATES
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
Condition L; ASTM D1238
LyondellBasell Hifaxâ„¢ EP2015/60 Thermoplastic Polyolefin Elastomer
Description: Hifaxâ„¢ EP2015/60 medium melt flow, 690 MPa flexural modulus, extrusion coating grade, specialty polypropylene copolymer has a very good balance of properties and processability. Th..
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238
SPS Guang Zhou POPTREEâ„¢ 6001A Flame-retarded Polyethylene
Characteristic: Low density, medium melt flow index, medium notched impact strength, no bloomingApplications: E/E partsInformation Provided by SPS (Guang Zhou) Ltd.
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM Data
Styron CALIBREâ„¢ 300 10 Polycarbonate, General Purpose
CALIBRE® 300 series are general purpose, UL listed polycarbonate resins. CALIBRE 300 series resins exhibit an excellent physical property balance of heat resistance, transparency and impact stren..
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Styron EMERGEâ„¢ 4800-10 Polycarbonate
EMERGEâ„¢ 4800-10 advanced resin provides superior ignition resistance in opaque, injection molding applications. Physical properties and process-ability are outstanding for this class of polyca..
Melt Flow 10 g/10 min

@Load 5.00 kg,
Temperature 200 °C
10 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Supreme Petrochem SPEXP 44 Antistatic Polystyrene
Characteristics Easy flow Good transparency Very good flexibility Processing Extrusion Applications Transparent profiles for electrostatic dissipative packaging of small electronic components such..
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238
A. Schulman POLYFORT™ PP 3720
Information provided by A. Schulman.
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238
A. Schulman POLYFLAM™ FPP 1007 Talc Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1007 is a 40% talc filled homopolymer polypropylene compound.Information provided by A. Schulman.
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene
DescriptionPolyfort® FPP 1245U is a 20% CAC03 filled UV stable copolymer polypropylene product. Information provided by A. Schulman.
Melt Flow 10 g/10 min
10 g/10 min
ASTM D1238
A. Schulman POLYFORT™ PX 1042
Information provided by A. Schulman.
Melt Flow 10 g/10 min

@Load 2.16 kg,
Temperature 250 °C
10 g/10 min

@Load 4.76 lb,
Temperature 482 °F
ISO 1133
Polyram RamSter PF300G9 PBT, 45% Glass Fiber
45% Glass fiber reinforced PBT for injection molding applications.Information provided by Polyram.
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ISO 1133
Covestro Makrolon® 2805 MAS145 Polycarbonate
Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• General purpose• Med..
Melt Flow 10 g/10 min

@Load 5.00 kg,
Temperature 200 °C
10 g/10 min

@Load 11.0 lb,
Temperature 392 °F
BASF Polystyrol® 143 EO Polystyrene (Europe)
Easy flowing grade for the injection molding and extrusion of low-taint food packaging.Data was collected by ISO methods and provided by BASF.
Melt Flow 10 g/10 min

@Temperature 230 °C
10 g/10 min

@Temperature 446 °F
I<sub>2</sub>; ASTM D1238
Formosa Plastics Formolene® 2810A Injection Molding RTPO Polypropylene  (discontinued **)
Reactor (In-Situ) Thermoplastic Olefin (RTPO)Applications: Automotive, appliances, lawn and garden, medical and rigid packaging.Formolene 2810A is an RTPO made with the latest gas phase technology c..
Copyright © lookpolymers.com All Rights Reserved