Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23/23°C; ASTM D792 |
RheTech Products FRP102-01 Polypropylene, Flame Retardant, Black Applications: Electrical component housingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23/23°C; ASTM D792 |
RheTech Products FT4650-01UV Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Scuff platesExterior grillesBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Quadrant EPP Proteus® HDPE - High Density Polyethylene (ASTM Product Data Sheet) Natural and Black |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Radici Heraflex® A 70-22-90 HG TPS-SEBS Thermoplastic Elastomer TPS-SEBS Thermoplastic Elastomer. 70 Shore A. Stable to light, high heat aging resistance and easy to demold.Application examples: sealings, air ductsProcessing technology: Injection moldingSpecial .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Radici Heraflex® A 90-21-90 TPS-SEBS Thermoplastic Elastomer TPS-SEBS Thermoplastic Elastomer. 90 Shore A, improved compression set Application examples: rollers, cover for hand-brake leverProcessing technology: Injection moldingInformation provided by Radici.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Radici Heraflex® HP 40-21-60 TPS-SEBS Thermoplastic Elastomer TPS-SEBS Thermoplastic Elastomer. 40 Shore A. Good adhesion to polar materials.Application examples: Sealing ring for housing coverProcessing technology: Injection moldingInformation provided by Rad.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183 |
Polimeri Europa Eraclene® PF 92 High Density Polyethylene - Pipe Grade Resin Eraclene PF 92 is a homopolymer high density polyethylene resin (HDPE) with antioxidants, suitable for pipe application. It is characterized by high rigidity, high impact strength and low swelling... |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Radici Heraflex® A 70-21-22 UV TPS-SEBS Thermoplastic Elastomer TPS-SEBS Thermoplastic Elastomer. 70 Shore A. Low odor level, easy to demold.Application examples: matsProcessing technology: Injection moldingSpecial properties: Weather resistantInformation provid.. |
|||
Specific Gravity | 0.960 - 0.980 g/cc | 0.960 - 0.980 g/cc | |
Michelman® Michem® Lube 124 Anionic microcrystalline wax emulsion Description: Anionic microcrystalline wax emulsionUsage: Michem® Lube 124 as an additive provides release and acts as a detackifier for synthetic and natural rubber. Michem® Lube 124 is used s.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183 |
LyondellBasell DEXFLEX® 727 TPO Description: DEXFLEX® 727 is a thermoplastic olefinic elastomer (TPO) designed for automotive exterior applications that require a combination of stiffness, good low-temperature impact resistance.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Shin-Etsu Silicones KF-9909 Fluid Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Chase Plastics CP Pryme® PE-200-HD8M General Purpose High Density Polyethylene Information provided by Chase Plastics. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 396 Ionomer DescriptionFormion® FI 3936is a 3% glass fiber reinforced, injection molding grade Ionomer, which has been formulated for scratch resistance, and impact. Formion F1 396U is UV stabilized to exceed .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
A. Schulman LP479-01 High-Density Polyethylene Homopolymer DescriptionLP 479-01 is a high-density polyethylene homopolymer, offering good processability at high production rates. ApplicationUses of LP 479-01 include blown film and blow molded containers. In.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 15°C; ASTM D1298 |
ExxonMobil 68 Mobil EAL Arctic Series Mobil EAL Arctic Series are high performance Environmental Awareness Lubricants (EAL) that are fully synthetic products designed specifically for the lubrication of refrigeration compressors and sys.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
A. Schulman POLYBATCH™ 10178Z Amber Concentrate Based in LDPE Description POLYBATCH® Amber 10178Z is an amber color concentrate based in LDPE. ApplicationPOLYBATCH® 10178Z is designed for use between 3 and 5% in HDPE molded bottles (approx. 50 mil) to achiev.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D 792 |
Zylog Neoplast® 187 FT EB Thermoplastic Vulcanizate Neoplast 187 FT EB is a hard, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Molding, Blow Molding and Extrusion applications.Ro.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Teknor Apex Uniprene® UN-7010-55NT Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Gaskets; Glazing; Grommets; Medical Pump Seals; Medical/Healthcare Applications; Plugs; Shock Absorbing Pads; Tubing Agency Ratings: NSF 61 Forms: Pellets Processin.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 120 Non-Reinforced, Injection Molding Grade Zinc Ionomer DescriptionFormion® FI 120 is a non-reinforced, transparent, injection molding grade Zinc Ionomer. It has been formulated for high durability, scratch resistance, low temperature ductility, and lo.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ISO 1183 |
Total HDPE HD 6081 High Density Polyethylene - Injection Molding HD 6081 is a high density polyethylene with very good organoleptic properties, rigidity and processability.It is especially suited for the production of caps & closures for non-carbonated drinks by .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | |
Zeon Chemicals Nipol® 1312 Liquid Nitrile Elastomer Nipol 1312 is a copolymer of butadiene and acrylonitrile with medium oil resistance in liquid form. Sufficient antioxidant is added during manufacture for normal storage conditions.Plasticizer used .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 201-80 Thermoplastic Elastomer A soft, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 and ISO 1183 |
ExxonMobil Santoprene® 691-73W175 Thermoplastic Vulcanizate Product Description: A soft, colorable thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for thin wall, architectural glazing and sealing applic.. |
|||
Specific Gravity | 0.960 g/cc @Temperature 25.0 °C |
0.960 g/cc @Temperature 77.0 °F |
|
Dow Corning XIAMETER® PMCPPMX-0210 Silicone Fluid 100CS Is chemically equivalent to DOW CORNING® 210H FLUID 100CS. This product is a heat stabilized polydimethlysiloxane, used for heat transfer.Information provided by Dow Corning |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
Elastocon TPE Technologies Elastocon® STK40 Thermoplastic Elastomer Elastocon® STK40 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® STK40 is well suited for consumer .. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 271-73 Thermoplastic Elastomer A soft, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated use, as well as t.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | 23°C; ASTM D792 |
ExxonMobil Santoprene® 101-55W185 Thermoplastic Elastomer
(discontinued **) A soft, black, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good fluid resistance and physical properties that meet ASTM F 477 for lo.. |
|||
Specific Gravity | 0.960 g/cc | 0.960 g/cc | ASTM D792 |
PolyOne Synprene® ST-6250 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Over-Molding GradeUV StabilizedApplications:Multi-PurposeProcessing Method:Injection MoldingPolyOne First ChoiceInformation provided by PolyOne Corporation. |