Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.86 g/cc | 0.284 lb/in³ | |
Lucas-Milhaupt SIL-FOS 6 Silver/ Copper/ Phosphorus Alloy Applications: Sil-Fos 6 is a low cost brazing filler metal suitable for joining copper to copper and copper to copper alloys where critical impact or vibration stresses are not encountered in servi.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Latrobe Lescalloy® D6AC VAC-ARC High Strength Alloy Steel LESCALLOY D6AC VAC-ARC steel is a medium carbon, low alloy, ultra high strength steel primarily designed for high strength structural applications requiring strength leaves up to 280,000 psi. This .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Latrobe LSSâ„¢ D3 Tool Steel (ASTM D3) TLS D3 tool steel is a high-carbon, high-chromium, oil-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the mi.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Special Metals BRIGHTRAY® Alloy F Electrical Resistance Alloy A nickel-iron-chromium electrical-resistance alloy for use at temperatures up to 1920°F (1050°C) under continuous operating conditions. Its high iron content and relatively low level of nicke.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Special Metals INCOLOY® Alloy DS A nickel-iron-chromium alloy with an addition of silicon. It has good high-temperature strength and excellent resistance to oxidation and carburization. The silicon content makes the alloy resista.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Schmolz + Bickenbach P-20 Modified Plastic Mold Steel Description: P-20 Modified is an improved pre-hardened mold steel that has been specially designed for large plastic molds; The material is forged on a 5000 ton press assuring maximum deformation du.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | H1150 |
Crucible Steel 17Cr-4Ni Precipitation Hardening Stainless Steel Crucible 17Cr-4Ni is a precipitation-hardening stainless steel which is capable of a high strength and hardness levels after a relatively simple heat-treatment procedure. This grade is martensitic a.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Crucible Steel AISI 6150 Alloy Steel Information provided by Crucible Industries |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Crucible Steel CSM® 2 Mold Steel, AISI P20 CSM 2 is a prehardened, general purpose mold steel suitable for production of machined or EDM’d plastic mold and zinc die casting die components. CSM 2 is supplied prehardened at two hardnesses: re.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | As Annealed |
Eagle Brass 1008 Low Carbon Steel, 1/4 Hardened 1008 is a standard grade Carbon Steel. This alloy is generally used for "commercial quality" cold rolled steel. It is an economical, general purpose steel grade offering moderate strength and toughn.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | As Annealed |
Eagle Brass 1008 Low Carbon Steel, 1/2 Hardened 1008 is a standard grade Carbon Steel. This alloy is generally used for "commercial quality" cold rolled steel. It is an economical, general purpose steel grade offering moderate strength and toughn.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Carpenter AerMet® 340 |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, 10% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, 5% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, 50% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, 60% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201L, 10% Cold Work (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201L, 5% Cold Work (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201L, 50% Cold Work (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201L, Annealed (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allvac® 9310 UNS G93106, UNS H93100 Specialty Steel Uses: Automotive applications, structural components, gears, rods, heat-treatable shafts.Property values are for samples in the metallurgical condition: 1630°F normalized.Information provided by Al.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allvac® Nickelvac® XM-19 UNS S20910 Specialty Steel Uses: Chemical processing equipment, high-strength pump shafts, surgical implants, intermedullary nails, plates, screws, wires.Property values are for samples in the metallurgical condition: 1900°F.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allvac® Vasco® 9310 Specialty Steel, Heat Treatment: 899°C (1650°F) Normalization Data provided by Allvac.Applications: High performance helicopter transmission gears, components. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allvac® Vasco® Greek Ascoloy Specialty Steel, Heat Treatment: 871°C (1600°F) + Age Data provided by Allvac.Applications: Compressor blades, vanes, disks, shafts, wheels, fasteners, gas turbine and jet engine components. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | 200 HB |
Assab Steels 760 Machinery Steel ASSAB 760 is an easily machinable carbon steel characterized by: Good machinabilityGood mechanical strengthASSAB 760 is primarily intended to be used in the as-delivered condition. It is only to be .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, 20% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
ATI Allegheny Ludlum Stainless Steel Type 201, Annealed (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Latrobe LSS™ L6 Tool Steel (ASTM L6) TLS L6 tool steel is a versatile, oil-hardening tool steel that is characterized by very good toughness. TLS L6 tool steel is suitable for use as tools, dies, and machine parts which require a good .. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Latrobe LSS™ P20 Mold Steel (ASTM P20) TLS P20 mold steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and toolin.. |
|||
Density | 7.86 g/cc | 0.284 lb/in³ | |
Special Metals INCOLOY® alloy 803 Fe-Ni-Cr Alloy INCOLOY® alloy 803 (UNS S35045), an iron-nickel-chromium alloy, is designed for use in petrochemical, chemical and thermal processing applications. The nickel and chromium contents of alloy 803 ar.. |