Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.13 g/cc | 0.0408 lb/in³ | STN EN ISO 1183-1 |
Plastcom PLASTAMID® 66 BT N 32 A PA66 PA66 basic type for injection molding, compounding, extrusion. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, clamps, hobby tools, toys. Delivere.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | DAM; ASTM D792 |
Ravago Manufacturing Americas Hylon® N2000NHL Nylon 6 (Cond) Information provided by Ravago. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183/A |
Solvay Specialty Polymers Amodel® AT-1002 HS Polyphthalamide (PPA)
(Unverified Data**) Amodel AT-1002 HS is a neat, toughened, heat stabilized polyphthalamide (PPA) resin that offers superior retention of properties after humid thermal aging; high impact at low temperature and better .. |
|||
Density | 1.13 - 1.72 g/cc | 0.0408 - 0.0621 lb/in³ | Average value: 1.37 g/cc Grade Count:195 |
Overview of materials for Polysulfone (PSU) This property data is a summary of similar materials in the MatWeb database for the category "Polysulfone". Each property range of values reported is minimum and maximum values of appropriate MatWeb.. |
|||
Density | 1.13 - 1.14 g/cc | 0.0408 - 0.0412 lb/in³ | Average value: 1.14 g/cc Grade Count:10 |
Overview of materials for Nylon 6 Fiber This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6 Fiber". Each property range of values reported is minimum and maximum values of appropriate MatW.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | (DAM); ISO 1183 |
BASF Capron® 8200 NL Nylon 6 (Conditioned)
(discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
Inno-Comp INNOPOL® CS 2-5830 SA 30% Glass Filled Polypropylene Copolymer INNOPOL® CS 2-5830 SA is a 30 % glass-fiber-filled polypropylene block-copolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 2-5830 SA is recommended for p.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6 E U Availability: North AmericaForms: PelletsFeatures: General PurposeProcessing Method: ExtrusionTPCI# 9777102Information provided by TP Composites, Inc. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Techmer ES HiFill® PA6 HS L BK Heat Stabilized Availability: North AmericaForms: PelletsAdditive: Lubricant and Heat StabilizerFeatures: Lubricated and Heat StabilizedAppearance: BlackTPCI# 7190102Information provided by TP Composites, Inc. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP Stat-loy 9X05426C PMMA (Asia Pacific) LNP* Stat-loy* 9X05426C is a compound based on PMMA resin containing Anti-Static. Added features of this material include: Antistat.This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM A792 |
PlastxWorld Veroplas PB2000 Nylon 66 general purpose, unfilled injection molding gradeInformation provided by PlastxWorld Inc. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
Unitika A1030BRL PA6, Dry Information provided by Unitika Ltd. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber 30% Glass fiber reinforced polypropylene for injection molding applications. Approved and listed by WRAS Potable Water.Information provided by Polyram. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | dry; ISO 1183 |
DSM Novamid® 1010C2 PA6 Easy Molding Grade |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Adell BS-30 Nylon 6, General Purpose Data provided by Adell Plastics, Inc. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® 630 Nylon 6, General Purpose A general purpose Nylon 6 resin for injection molding.Data provided by the manufacturer |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
BASF Ultramid® B40 01 PA6 (Dry) Ultramid B40 01 is a high viscosity, PA6 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislat.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | |
A. Schulman ComAlloy Hiloy® 113 Polypropylene, Glass Reinforced, Chemically Coupled Data provided by the manufacturer, ComAlloy International Company.30% Glass Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183-1-A |
BASF Elastollan 2180 A TPUR Description: Thermoplastic Polyurethane Elastomers with excellent mechanical properties, outstanding wear resistance, high tear and tensile strength, good damping characteristics and a high resilien.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
BASF Capron® B73MP Nylon 6 (DAM)
(discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
BASF Capron® B73ZP Nylon 6 (DAM)
(discontinued **) Information provided by BASF Corporation.Capron® is no longer a part of the BASF standard line. The BASF nylon products have been consolidated in the Ultramid ® line. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | (DAM); ISO 1183 |
DSM Akulon® F223-DH Nylon 6 (European Grade) (Cond)
(discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
DSM Akulon® F223-DH Nylon 6 (European Grade) (Dry)
(discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier .. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Covestro Bayblend® 2253 Polycarbonate + ABS Blend, Extrusion
(discontinued **) Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 |
Ashley Polymers Ashlene® PC/ABS Alloy 307HF General purpose with high impact, good low temperature properties and high heat resistance.Data provided by the manufacturer |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
BASF Ultramid® B3S BK00464 PA6 (Conditioned) Description: Easy flowing, finely crystalline injection-molding grade for very fast processing. Uses include thin-walled technical parts (eg. housings, fittings, grips, small parts and fixing clamps.. |
|||
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM A792 |
PlastxWorld Veroplas PA2000 Nylon 6 general purpose, unfilled injection molding gradeInformation provided by PlastxWorld Inc. |